Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 507 insertions, 0 deletions

diff --git a/sound/soc/intel/boards/sof_realtek_common.c b/sound/soc/intel/boards/sof_realtek_common.c
new file mode 100644
index 000000000..6c12ca92f
--- /dev/null
+++ b/sound/soc/intel/boards/sof_realtek_common.c
@@ -0,0 +1,507 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// Copyright(c) 2020 Intel Corporation. All rights reserved.
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-acpi.h>
+#include <sound/soc-dai.h>
+#include <sound/soc-dapm.h>
+#include <sound/sof.h>
+#include <uapi/sound/asound.h>
+#include "../../codecs/rt1011.h"
+#include "../../codecs/rt1015.h"
+#include "../../codecs/rt1308.h"
+#include "sof_realtek_common.h"
+
+/*
+ * Current only 2-amp configuration is supported for rt1011
+ */
+static const struct snd_soc_dapm_route speaker_map_lr[] = {
+	/* speaker */
+	{ "Left Spk", NULL, "Left SPO" },
+	{ "Right Spk", NULL, "Right SPO" },
+};
+
+/*
+ * Make sure device's Unique ID follows this configuration:
+ *
+ * Two speakers:
+ *         0: left, 1: right
+ * Four speakers:
+ *         0: Woofer left, 1: Woofer right
+ *         2: Tweeter left, 3: Tweeter right
+ */
+static struct snd_soc_codec_conf rt1011_codec_confs[] = {
+	{
+		.dlc = COMP_CODEC_CONF(RT1011_DEV0_NAME),
+		.name_prefix = "Left",
+	},
+	{
+		.dlc = COMP_CODEC_CONF(RT1011_DEV1_NAME),
+		.name_prefix = "Right",
+	},
+};
+
+static struct snd_soc_dai_link_component rt1011_dai_link_components[] = {
+	{
+		.name = RT1011_DEV0_NAME,
+		.dai_name = RT1011_CODEC_DAI,
+	},
+	{
+		.name = RT1011_DEV1_NAME,
+		.dai_name = RT1011_CODEC_DAI,
+	},
+};
+
+static const struct {
+	unsigned int tx;
+	unsigned int rx;
+} rt1011_tdm_mask[] = {
+	{.tx = 0x4, .rx = 0x1},
+	{.tx = 0x8, .rx = 0x2},
+};
+
+static int rt1011_hw_params(struct snd_pcm_substream *substream,
+			    struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
+	struct snd_soc_dai *codec_dai;
+	int srate, i, ret = 0;
+
+	srate = params_rate(params);
+
+	for_each_rtd_codec_dais(rtd, i, codec_dai) {
+		/* 100 Fs to drive 24 bit data */
+		ret = snd_soc_dai_set_pll(codec_dai, 0, RT1011_PLL1_S_BCLK,
+					  100 * srate, 256 * srate);
+		if (ret < 0) {
+			dev_err(codec_dai->dev, "fail to set pll, ret %d\n",
+				ret);
+			return ret;
+		}
+
+		ret = snd_soc_dai_set_sysclk(codec_dai, RT1011_FS_SYS_PRE_S_PLL1,
+					     256 * srate, SND_SOC_CLOCK_IN);
+		if (ret < 0) {
+			dev_err(codec_dai->dev, "fail to set sysclk, ret %d\n",
+				ret);
+			return ret;
+		}
+
+		if (i >= ARRAY_SIZE(rt1011_tdm_mask)) {
+			dev_err(codec_dai->dev, "invalid codec index %d\n",
+				i);
+			return -ENODEV;
+		}
+
+		ret = snd_soc_dai_set_tdm_slot(codec_dai, rt1011_tdm_mask[i].tx,
+					       rt1011_tdm_mask[i].rx, 4,
+					       params_width(params));
+		if (ret < 0) {
+			dev_err(codec_dai->dev, "fail to set tdm slot, ret %d\n",
+				ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static const struct snd_soc_ops rt1011_ops = {
+	.hw_params = rt1011_hw_params,
+};
+
+static int rt1011_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_card *card = rtd->card;
+	int ret;
+
+	ret = snd_soc_dapm_add_routes(&card->dapm, speaker_map_lr,
+				      ARRAY_SIZE(speaker_map_lr));
+	if (ret)
+		dev_err(rtd->dev, "Speaker map addition failed: %d\n", ret);
+	return ret;
+}
+
+void sof_rt1011_dai_link(struct snd_soc_dai_link *link)
+{
+	link->codecs = rt1011_dai_link_components;
+	link->num_codecs = ARRAY_SIZE(rt1011_dai_link_components);
+	link->init = rt1011_init;
+	link->ops = &rt1011_ops;
+}
+EXPORT_SYMBOL_NS(sof_rt1011_dai_link, SND_SOC_INTEL_SOF_REALTEK_COMMON);
+
+void sof_rt1011_codec_conf(struct snd_soc_card *card)
+{
+	card->codec_conf = rt1011_codec_confs;
+	card->num_configs = ARRAY_SIZE(rt1011_codec_confs);
+}
+EXPORT_SYMBOL_NS(sof_rt1011_codec_conf, SND_SOC_INTEL_SOF_REALTEK_COMMON);
+
+/*
+ * rt1015:  i2c mode driver for ALC1015 and ALC1015Q
+ * rt1015p: auto-mode driver for ALC1015, ALC1015Q, and ALC1015Q-VB
+ *
+ * For stereo output, there are always two amplifiers on the board.
+ * However, the ACPI implements only one device instance (UID=0) if they
+ * are sharing the same enable pin. The code will detect the number of
+ * device instance and use corresponding DAPM structures for
+ * initialization.
+ */
+static const struct snd_soc_dapm_route rt1015p_1dev_dapm_routes[] = {
+	/* speaker */
+	{ "Left Spk", NULL, "Speaker" },
+	{ "Right Spk", NULL, "Speaker" },
+};
+
+static const struct snd_soc_dapm_route rt1015p_2dev_dapm_routes[] = {
+	/* speaker */
+	{ "Left Spk", NULL, "Left Speaker" },
+	{ "Right Spk", NULL, "Right Speaker" },
+};
+
+static struct snd_soc_codec_conf rt1015p_codec_confs[] = {
+	{
+		.dlc = COMP_CODEC_CONF(RT1015P_DEV0_NAME),
+		.name_prefix = "Left",
+	},
+	{
+		.dlc = COMP_CODEC_CONF(RT1015P_DEV1_NAME),
+		.name_prefix = "Right",
+	},
+};
+
+static struct snd_soc_dai_link_component rt1015p_dai_link_components[] = {
+	{
+		.name = RT1015P_DEV0_NAME,
+		.dai_name = RT1015P_CODEC_DAI,
+	},
+	{
+		.name = RT1015P_DEV1_NAME,
+		.dai_name = RT1015P_CODEC_DAI,
+	},
+};
+
+static int rt1015p_get_num_codecs(void)
+{
+	static int dev_num;
+
+	if (dev_num)
+		return dev_num;
+
+	if (!acpi_dev_present("RTL1015", "1", -1))
+		dev_num = 1;
+	else
+		dev_num = 2;
+
+	return dev_num;
+}
+
+static int rt1015p_hw_params(struct snd_pcm_substream *substream,
+			     struct snd_pcm_hw_params *params)
+{
+	/* reserved for debugging purpose */
+
+	return 0;
+}
+
+static const struct snd_soc_ops rt1015p_ops = {
+	.hw_params = rt1015p_hw_params,
+};
+
+static int rt1015p_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_card *card = rtd->card;
+	int ret;
+
+	if (rt1015p_get_num_codecs() == 1)
+		ret = snd_soc_dapm_add_routes(&card->dapm, rt1015p_1dev_dapm_routes,
+					      ARRAY_SIZE(rt1015p_1dev_dapm_routes));
+	else
+		ret = snd_soc_dapm_add_routes(&card->dapm, rt1015p_2dev_dapm_routes,
+					      ARRAY_SIZE(rt1015p_2dev_dapm_routes));
+	if (ret)
+		dev_err(rtd->dev, "Speaker map addition failed: %d\n", ret);
+	return ret;
+}
+
+void sof_rt1015p_dai_link(struct snd_soc_dai_link *link)
+{
+	link->codecs = rt1015p_dai_link_components;
+	link->num_codecs = rt1015p_get_num_codecs();
+	link->init = rt1015p_init;
+	link->ops = &rt1015p_ops;
+}
+EXPORT_SYMBOL_NS(sof_rt1015p_dai_link, SND_SOC_INTEL_SOF_REALTEK_COMMON);
+
+void sof_rt1015p_codec_conf(struct snd_soc_card *card)
+{
+	if (rt1015p_get_num_codecs() == 1)
+		return;
+
+	card->codec_conf = rt1015p_codec_confs;
+	card->num_configs = ARRAY_SIZE(rt1015p_codec_confs);
+}
+EXPORT_SYMBOL_NS(sof_rt1015p_codec_conf, SND_SOC_INTEL_SOF_REALTEK_COMMON);
+
+/*
+ * RT1015 audio amplifier
+ */
+
+static const struct {
+	unsigned int tx;
+	unsigned int rx;
+} rt1015_tdm_mask[] = {
+	{.tx = 0x0, .rx = 0x1},
+	{.tx = 0x0, .rx = 0x2},
+};
+
+static int rt1015_hw_params(struct snd_pcm_substream *substream,
+			    struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
+	struct snd_soc_dai_link *dai_link = rtd->dai_link;
+	struct snd_soc_dai *codec_dai;
+	int i, clk_freq;
+	int ret = 0;
+
+	clk_freq = sof_dai_get_bclk(rtd);
+
+	if (clk_freq <= 0) {
+		dev_err(rtd->dev, "fail to get bclk freq, ret %d\n", clk_freq);
+		return -EINVAL;
+	}
+
+	for_each_rtd_codec_dais(rtd, i, codec_dai) {
+		ret = snd_soc_dai_set_pll(codec_dai, 0, RT1015_PLL_S_BCLK,
+					  clk_freq,
+					  params_rate(params) * 256);
+		if (ret) {
+			dev_err(codec_dai->dev, "fail to set pll, ret %d\n",
+				ret);
+			return ret;
+		}
+
+		ret = snd_soc_dai_set_sysclk(codec_dai, RT1015_SCLK_S_PLL,
+					     params_rate(params) * 256,
+					     SND_SOC_CLOCK_IN);
+		if (ret) {
+			dev_err(codec_dai->dev, "fail to set sysclk, ret %d\n",
+				ret);
+			return ret;
+		}
+
+		switch (dai_link->dai_fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+		case SND_SOC_DAIFMT_DSP_A:
+		case SND_SOC_DAIFMT_DSP_B:
+			/* 4-slot TDM */
+			ret = snd_soc_dai_set_tdm_slot(codec_dai,
+						       rt1015_tdm_mask[i].tx,
+						       rt1015_tdm_mask[i].rx,
+						       4,
+						       params_width(params));
+			if (ret < 0) {
+				dev_err(codec_dai->dev, "fail to set tdm slot, ret %d\n",
+					ret);
+				return ret;
+			}
+			break;
+		default:
+			dev_dbg(codec_dai->dev, "codec is in I2S mode\n");
+			break;
+		}
+	}
+
+	return ret;
+}
+
+static struct snd_soc_ops rt1015_ops = {
+	.hw_params = rt1015_hw_params,
+};
+
+static struct snd_soc_codec_conf rt1015_amp_conf[] = {
+	{
+		.dlc = COMP_CODEC_CONF(RT1015_DEV0_NAME),
+		.name_prefix = "Left",
+	},
+	{
+		.dlc = COMP_CODEC_CONF(RT1015_DEV1_NAME),
+		.name_prefix = "Right",
+	},
+};
+
+static struct snd_soc_dai_link_component rt1015_components[] = {
+	{
+		.name = RT1015_DEV0_NAME,
+		.dai_name = RT1015_CODEC_DAI,
+	},
+	{
+		.name = RT1015_DEV1_NAME,
+		.dai_name = RT1015_CODEC_DAI,
+	},
+};
+
+static int speaker_codec_init_lr(struct snd_soc_pcm_runtime *rtd)
+{
+	return snd_soc_dapm_add_routes(&rtd->card->dapm, speaker_map_lr,
+					ARRAY_SIZE(speaker_map_lr));
+}
+
+void sof_rt1015_codec_conf(struct snd_soc_card *card)
+{
+	card->codec_conf = rt1015_amp_conf;
+	card->num_configs = ARRAY_SIZE(rt1015_amp_conf);
+}
+EXPORT_SYMBOL_NS(sof_rt1015_codec_conf, SND_SOC_INTEL_SOF_REALTEK_COMMON);
+
+void sof_rt1015_dai_link(struct snd_soc_dai_link *link)
+{
+	link->codecs = rt1015_components;
+	link->num_codecs = ARRAY_SIZE(rt1015_components);
+	link->init = speaker_codec_init_lr;
+	link->ops = &rt1015_ops;
+}
+EXPORT_SYMBOL_NS(sof_rt1015_dai_link, SND_SOC_INTEL_SOF_REALTEK_COMMON);
+
+/*
+ * RT1308 audio amplifier
+ */
+static const struct snd_kcontrol_new rt1308_kcontrols[] = {
+	SOC_DAPM_PIN_SWITCH("Speakers"),
+};
+
+static const struct snd_soc_dapm_widget rt1308_dapm_widgets[] = {
+	SND_SOC_DAPM_SPK("Speakers", NULL),
+};
+
+static const struct snd_soc_dapm_route rt1308_dapm_routes[] = {
+	/* speaker */
+	{"Speakers", NULL, "SPOL"},
+	{"Speakers", NULL, "SPOR"},
+};
+
+static struct snd_soc_dai_link_component rt1308_components[] = {
+	{
+		.name = RT1308_DEV0_NAME,
+		.dai_name = RT1308_CODEC_DAI,
+	}
+};
+
+static int rt1308_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_card *card = rtd->card;
+	int ret;
+
+	ret = snd_soc_dapm_new_controls(&card->dapm, rt1308_dapm_widgets,
+					ARRAY_SIZE(rt1308_dapm_widgets));
+	if (ret) {
+		dev_err(rtd->dev, "fail to add dapm controls, ret %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_add_card_controls(card, rt1308_kcontrols,
+					ARRAY_SIZE(rt1308_kcontrols));
+	if (ret) {
+		dev_err(rtd->dev, "fail to add card controls, ret %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_dapm_add_routes(&card->dapm, rt1308_dapm_routes,
+				      ARRAY_SIZE(rt1308_dapm_routes));
+
+	if (ret)
+		dev_err(rtd->dev, "fail to add dapm routes, ret %d\n", ret);
+
+	return ret;
+}
+
+static int rt1308_hw_params(struct snd_pcm_substream *substream,
+			    struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
+	struct snd_soc_card *card = rtd->card;
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	int clk_id, clk_freq, pll_out;
+	int ret;
+
+	clk_id = RT1308_PLL_S_MCLK;
+	/* get the tplg configured mclk. */
+	clk_freq = sof_dai_get_mclk(rtd);
+
+	pll_out = params_rate(params) * 512;
+
+	/* Set rt1308 pll */
+	ret = snd_soc_dai_set_pll(codec_dai, 0, clk_id, clk_freq, pll_out);
+	if (ret < 0) {
+		dev_err(card->dev, "Failed to set RT1308 PLL: %d\n", ret);
+		return ret;
+	}
+
+	/* Set rt1308 sysclk */
+	ret = snd_soc_dai_set_sysclk(codec_dai, RT1308_FS_SYS_S_PLL, pll_out,
+				     SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		dev_err(card->dev, "Failed to set RT1308 SYSCLK: %d\n", ret);
+
+	return ret;
+}
+
+static const struct snd_soc_ops rt1308_ops = {
+	.hw_params = rt1308_hw_params,
+};
+
+void sof_rt1308_dai_link(struct snd_soc_dai_link *link)
+{
+	link->codecs = rt1308_components;
+	link->num_codecs = ARRAY_SIZE(rt1308_components);
+	link->init = rt1308_init;
+	link->ops = &rt1308_ops;
+}
+EXPORT_SYMBOL_NS(sof_rt1308_dai_link, SND_SOC_INTEL_SOF_REALTEK_COMMON);
+
+/*
+ * 2-amp Configuration for RT1019
+ */
+
+static const struct snd_soc_dapm_route rt1019p_dapm_routes[] = {
+	/* speaker */
+	{ "Left Spk", NULL, "Speaker" },
+	{ "Right Spk", NULL, "Speaker" },
+};
+
+static struct snd_soc_dai_link_component rt1019p_components[] = {
+	{
+		.name = RT1019P_DEV0_NAME,
+		.dai_name = RT1019P_CODEC_DAI,
+	},
+};
+
+static int rt1019p_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_card *card = rtd->card;
+	int ret;
+
+	ret = snd_soc_dapm_add_routes(&card->dapm, rt1019p_dapm_routes,
+				      ARRAY_SIZE(rt1019p_dapm_routes));
+	if (ret) {
+		dev_err(rtd->dev, "Speaker map addition failed: %d\n", ret);
+		return ret;
+	}
+	return ret;
+}
+
+void sof_rt1019p_dai_link(struct snd_soc_dai_link *link)
+{
+	link->codecs = rt1019p_components;
+	link->num_codecs = ARRAY_SIZE(rt1019p_components);
+	link->init = rt1019p_init;
+}
+EXPORT_SYMBOL_NS(sof_rt1019p_dai_link, SND_SOC_INTEL_SOF_REALTEK_COMMON);
+
+MODULE_DESCRIPTION("ASoC Intel SOF Realtek helpers");
+MODULE_LICENSE("GPL");