Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 543 insertions, 0 deletions

diff --git a/sound/soc/samsung/midas_wm1811.c b/sound/soc/samsung/midas_wm1811.c
new file mode 100644
index 000000000..6931b9a45
--- /dev/null
+++ b/sound/soc/samsung/midas_wm1811.c
@@ -0,0 +1,543 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Midas audio support
+//
+// Copyright (C) 2018 Simon Shields <simon@lineageos.org>
+// Copyright (C) 2020 Samsung Electronics Co., Ltd.
+
+#include <linux/clk.h>
+#include <linux/gpio/consumer.h>
+#include <linux/mfd/wm8994/registers.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/regulator/consumer.h>
+#include <sound/jack.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include "i2s.h"
+#include "../codecs/wm8994.h"
+
+/*
+ * The MCLK1 clock source is XCLKOUT with its mux set to the external fixed rate
+ * oscillator (XXTI).
+ */
+#define MCLK1_RATE 24000000U
+#define MCLK2_RATE 32768U
+#define DEFAULT_FLL1_RATE 11289600U
+
+struct midas_priv {
+	struct regulator *reg_mic_bias;
+	struct regulator *reg_submic_bias;
+	struct gpio_desc *gpio_fm_sel;
+	struct gpio_desc *gpio_lineout_sel;
+	unsigned int fll1_rate;
+
+	struct snd_soc_jack headset_jack;
+};
+
+static int midas_start_fll1(struct snd_soc_pcm_runtime *rtd, unsigned int rate)
+{
+	struct snd_soc_card *card = rtd->card;
+	struct midas_priv *priv = snd_soc_card_get_drvdata(card);
+	struct snd_soc_dai *aif1_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	int ret;
+
+	if (!rate)
+		rate = priv->fll1_rate;
+	/*
+	 * If no new rate is requested, set FLL1 to a sane default for jack
+	 * detection.
+	 */
+	if (!rate)
+		rate = DEFAULT_FLL1_RATE;
+
+	if (rate != priv->fll1_rate && priv->fll1_rate) {
+		/* while reconfiguring, switch to MCLK2 for SYSCLK */
+		ret = snd_soc_dai_set_sysclk(aif1_dai, WM8994_SYSCLK_MCLK2,
+					     MCLK2_RATE, SND_SOC_CLOCK_IN);
+		if (ret < 0) {
+			dev_err(card->dev, "Unable to switch to MCLK2: %d\n", ret);
+			return ret;
+		}
+	}
+
+	ret = snd_soc_dai_set_pll(aif1_dai, WM8994_FLL1, WM8994_FLL_SRC_MCLK1,
+				  MCLK1_RATE, rate);
+	if (ret < 0) {
+		dev_err(card->dev, "Failed to set FLL1 rate: %d\n", ret);
+		return ret;
+	}
+	priv->fll1_rate = rate;
+
+	ret = snd_soc_dai_set_sysclk(aif1_dai, WM8994_SYSCLK_FLL1,
+				     priv->fll1_rate, SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		dev_err(card->dev, "Failed to set SYSCLK source: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_OPCLK, 0,
+				     SAMSUNG_I2S_OPCLK_PCLK);
+	if (ret < 0) {
+		dev_err(card->dev, "Failed to set OPCLK source: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int midas_stop_fll1(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_card *card = rtd->card;
+	struct midas_priv *priv = snd_soc_card_get_drvdata(card);
+	struct snd_soc_dai *aif1_dai = asoc_rtd_to_codec(rtd, 0);
+	int ret;
+
+	ret = snd_soc_dai_set_sysclk(aif1_dai, WM8994_SYSCLK_MCLK2,
+				     MCLK2_RATE, SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		dev_err(card->dev, "Unable to switch to MCLK2: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_dai_set_pll(aif1_dai, WM8994_FLL1, 0, 0, 0);
+	if (ret < 0) {
+		dev_err(card->dev, "Unable to stop FLL1: %d\n", ret);
+		return ret;
+	}
+
+	priv->fll1_rate = 0;
+
+	return 0;
+}
+
+static int midas_aif1_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd	= substream->private_data;
+	unsigned int pll_out;
+
+	/* AIF1CLK should be at least 3MHz for "optimal performance" */
+	if (params_rate(params) == 8000 || params_rate(params) == 11025)
+		pll_out = params_rate(params) * 512;
+	else
+		pll_out = params_rate(params) * 256;
+
+	return midas_start_fll1(rtd, pll_out);
+}
+
+static const struct snd_soc_ops midas_aif1_ops = {
+	.hw_params = midas_aif1_hw_params,
+};
+
+/*
+ * We only have a single external speaker, so mix stereo data
+ * to a single mono stream.
+ */
+static int midas_ext_spkmode(struct snd_soc_dapm_widget *w,
+			     struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_component *codec = snd_soc_dapm_to_component(w->dapm);
+	int ret = 0;
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		ret = snd_soc_component_update_bits(codec, WM8994_SPKOUT_MIXERS,
+				  WM8994_SPKMIXR_TO_SPKOUTL_MASK,
+				  WM8994_SPKMIXR_TO_SPKOUTL);
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		ret = snd_soc_component_update_bits(codec, WM8994_SPKOUT_MIXERS,
+				  WM8994_SPKMIXR_TO_SPKOUTL_MASK,
+				  0);
+		break;
+	}
+
+	return ret;
+}
+
+static int midas_mic_bias(struct snd_soc_dapm_widget *w,
+			  struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_card *card = w->dapm->card;
+	struct midas_priv *priv = snd_soc_card_get_drvdata(card);
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		return regulator_enable(priv->reg_mic_bias);
+	case SND_SOC_DAPM_POST_PMD:
+		return regulator_disable(priv->reg_mic_bias);
+	}
+
+	return 0;
+}
+
+static int midas_submic_bias(struct snd_soc_dapm_widget *w,
+			     struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_card *card = w->dapm->card;
+	struct midas_priv *priv = snd_soc_card_get_drvdata(card);
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		return regulator_enable(priv->reg_submic_bias);
+	case SND_SOC_DAPM_POST_PMD:
+		return regulator_disable(priv->reg_submic_bias);
+	}
+
+	return 0;
+}
+
+static int midas_fm_set(struct snd_soc_dapm_widget *w,
+			struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_card *card = w->dapm->card;
+	struct midas_priv *priv = snd_soc_card_get_drvdata(card);
+
+	if (!priv->gpio_fm_sel)
+		return 0;
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		gpiod_set_value_cansleep(priv->gpio_fm_sel, 1);
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		gpiod_set_value_cansleep(priv->gpio_fm_sel, 0);
+		break;
+	}
+
+	return 0;
+}
+
+static int midas_line_set(struct snd_soc_dapm_widget *w,
+			  struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_card *card = w->dapm->card;
+	struct midas_priv *priv = snd_soc_card_get_drvdata(card);
+
+	if (!priv->gpio_lineout_sel)
+		return 0;
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		gpiod_set_value_cansleep(priv->gpio_lineout_sel, 1);
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		gpiod_set_value_cansleep(priv->gpio_lineout_sel, 0);
+		break;
+	}
+
+	return 0;
+}
+
+static const struct snd_kcontrol_new midas_controls[] = {
+	SOC_DAPM_PIN_SWITCH("HP"),
+
+	SOC_DAPM_PIN_SWITCH("SPK"),
+	SOC_DAPM_PIN_SWITCH("RCV"),
+
+	SOC_DAPM_PIN_SWITCH("LINE"),
+	SOC_DAPM_PIN_SWITCH("HDMI"),
+
+	SOC_DAPM_PIN_SWITCH("Main Mic"),
+	SOC_DAPM_PIN_SWITCH("Sub Mic"),
+	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+
+	SOC_DAPM_PIN_SWITCH("FM In"),
+};
+
+static const struct snd_soc_dapm_widget midas_dapm_widgets[] = {
+	SND_SOC_DAPM_HP("HP", NULL),
+
+	SND_SOC_DAPM_SPK("SPK", midas_ext_spkmode),
+	SND_SOC_DAPM_SPK("RCV", NULL),
+
+	/* FIXME: toggle MAX77693 on i9300/i9305 */
+	SND_SOC_DAPM_LINE("LINE", midas_line_set),
+	SND_SOC_DAPM_LINE("HDMI", NULL),
+	SND_SOC_DAPM_LINE("FM In", midas_fm_set),
+
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+	SND_SOC_DAPM_MIC("Main Mic", midas_mic_bias),
+	SND_SOC_DAPM_MIC("Sub Mic", midas_submic_bias),
+};
+
+static int midas_set_bias_level(struct snd_soc_card *card,
+				struct snd_soc_dapm_context *dapm,
+				enum snd_soc_bias_level level)
+{
+	struct snd_soc_pcm_runtime *rtd = snd_soc_get_pcm_runtime(card,
+						  &card->dai_link[0]);
+	struct snd_soc_dai *aif1_dai = asoc_rtd_to_codec(rtd, 0);
+
+	if (dapm->dev != aif1_dai->dev)
+		return 0;
+
+	switch (level) {
+	case SND_SOC_BIAS_STANDBY:
+		return midas_stop_fll1(rtd);
+	case SND_SOC_BIAS_PREPARE:
+		return midas_start_fll1(rtd, 0);
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int midas_late_probe(struct snd_soc_card *card)
+{
+	struct snd_soc_pcm_runtime *rtd = snd_soc_get_pcm_runtime(card,
+							&card->dai_link[0]);
+	struct snd_soc_dai *aif1_dai = asoc_rtd_to_codec(rtd, 0);
+	struct midas_priv *priv = snd_soc_card_get_drvdata(card);
+	int ret;
+
+	/* Use MCLK2 as SYSCLK for boot */
+	ret = snd_soc_dai_set_sysclk(aif1_dai, WM8994_SYSCLK_MCLK2, MCLK2_RATE,
+				     SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		dev_err(aif1_dai->dev, "Failed to switch to MCLK2: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_card_jack_new(card, "Headset",
+			SND_JACK_HEADSET | SND_JACK_MECHANICAL |
+			SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2 |
+			SND_JACK_BTN_3 | SND_JACK_BTN_4 | SND_JACK_BTN_5,
+			&priv->headset_jack);
+	if (ret)
+		return ret;
+
+	wm8958_mic_detect(aif1_dai->component, &priv->headset_jack,
+			  NULL, NULL, NULL, NULL);
+	return 0;
+}
+
+static struct snd_soc_dai_driver midas_ext_dai[] = {
+	{
+		.name = "Voice call",
+		.playback = {
+			.channels_min = 1,
+			.channels_max = 2,
+			.rate_min = 8000,
+			.rate_max = 16000,
+			.rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000),
+			.formats = SNDRV_PCM_FMTBIT_S16_LE,
+		},
+		.capture = {
+			.channels_min = 1,
+			.channels_max = 2,
+			.rate_min = 8000,
+			.rate_max = 16000,
+			.rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000),
+			.formats = SNDRV_PCM_FMTBIT_S16_LE,
+		},
+	},
+	{
+		.name = "Bluetooth",
+		.playback = {
+			.channels_min = 1,
+			.channels_max = 2,
+			.rate_min = 8000,
+			.rate_max = 16000,
+			.rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000),
+			.formats = SNDRV_PCM_FMTBIT_S16_LE,
+		},
+		.capture = {
+			.channels_min = 1,
+			.channels_max = 2,
+			.rate_min = 8000,
+			.rate_max = 16000,
+			.rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000),
+			.formats = SNDRV_PCM_FMTBIT_S16_LE,
+		},
+	},
+};
+
+static const struct snd_soc_component_driver midas_component = {
+	.name	= "midas-audio",
+};
+
+SND_SOC_DAILINK_DEFS(wm1811_hifi,
+	DAILINK_COMP_ARRAY(COMP_EMPTY()),
+	DAILINK_COMP_ARRAY(COMP_CODEC(NULL, "wm8994-aif1")),
+	DAILINK_COMP_ARRAY(COMP_EMPTY()));
+
+SND_SOC_DAILINK_DEFS(wm1811_voice,
+	DAILINK_COMP_ARRAY(COMP_EMPTY()),
+	DAILINK_COMP_ARRAY(COMP_CODEC(NULL, "wm8994-aif2")),
+	DAILINK_COMP_ARRAY(COMP_EMPTY()));
+
+SND_SOC_DAILINK_DEFS(wm1811_bt,
+	DAILINK_COMP_ARRAY(COMP_EMPTY()),
+	DAILINK_COMP_ARRAY(COMP_CODEC(NULL, "wm8994-aif3")),
+	DAILINK_COMP_ARRAY(COMP_EMPTY()));
+
+static struct snd_soc_dai_link midas_dai[] = {
+	{
+		.name = "WM8994 AIF1",
+		.stream_name = "HiFi Primary",
+		.ops = &midas_aif1_ops,
+		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+			SND_SOC_DAIFMT_CBM_CFM,
+		SND_SOC_DAILINK_REG(wm1811_hifi),
+	}, {
+		.name = "WM1811 Voice",
+		.stream_name = "Voice call",
+		.ignore_suspend = 1,
+		SND_SOC_DAILINK_REG(wm1811_voice),
+	}, {
+		.name = "WM1811 BT",
+		.stream_name = "Bluetooth",
+		.ignore_suspend = 1,
+		SND_SOC_DAILINK_REG(wm1811_bt),
+	},
+};
+
+static struct snd_soc_card midas_card = {
+	.name = "Midas WM1811",
+	.owner = THIS_MODULE,
+
+	.dai_link = midas_dai,
+	.num_links = ARRAY_SIZE(midas_dai),
+	.controls = midas_controls,
+	.num_controls = ARRAY_SIZE(midas_controls),
+	.dapm_widgets = midas_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(midas_dapm_widgets),
+
+	.set_bias_level = midas_set_bias_level,
+	.late_probe = midas_late_probe,
+};
+
+static int midas_probe(struct platform_device *pdev)
+{
+	struct device_node *cpu_dai_node = NULL, *codec_dai_node = NULL;
+	struct device_node *cpu = NULL, *codec = NULL;
+	struct snd_soc_card *card = &midas_card;
+	struct device *dev = &pdev->dev;
+	static struct snd_soc_dai_link *dai_link;
+	struct midas_priv *priv;
+	int ret, i;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	snd_soc_card_set_drvdata(card, priv);
+	card->dev = dev;
+
+	priv->reg_mic_bias = devm_regulator_get(dev, "mic-bias");
+	if (IS_ERR(priv->reg_mic_bias)) {
+		dev_err(dev, "Failed to get mic bias regulator\n");
+		return PTR_ERR(priv->reg_mic_bias);
+	}
+
+	priv->reg_submic_bias = devm_regulator_get(dev, "submic-bias");
+	if (IS_ERR(priv->reg_submic_bias)) {
+		dev_err(dev, "Failed to get submic bias regulator\n");
+		return PTR_ERR(priv->reg_submic_bias);
+	}
+
+	priv->gpio_fm_sel = devm_gpiod_get_optional(dev, "fm-sel", GPIOD_OUT_HIGH);
+	if (IS_ERR(priv->gpio_fm_sel)) {
+		dev_err(dev, "Failed to get FM selection GPIO\n");
+		return PTR_ERR(priv->gpio_fm_sel);
+	}
+
+	priv->gpio_lineout_sel = devm_gpiod_get_optional(dev, "lineout-sel",
+						    GPIOD_OUT_HIGH);
+	if (IS_ERR(priv->gpio_lineout_sel)) {
+		dev_err(dev, "Failed to get line out selection GPIO\n");
+		return PTR_ERR(priv->gpio_lineout_sel);
+	}
+
+	ret = snd_soc_of_parse_card_name(card, "model");
+	if (ret < 0) {
+		dev_err(dev, "Card name is not specified\n");
+		return ret;
+	}
+
+	ret = snd_soc_of_parse_audio_routing(card, "samsung,audio-routing");
+	if (ret < 0) {
+		dev_err(dev, "Audio routing invalid/unspecified\n");
+		return ret;
+	}
+
+	cpu = of_get_child_by_name(dev->of_node, "cpu");
+	if (!cpu)
+		return -EINVAL;
+
+	codec = of_get_child_by_name(dev->of_node, "codec");
+	if (!codec) {
+		of_node_put(cpu);
+		return -EINVAL;
+	}
+
+	cpu_dai_node = of_parse_phandle(cpu, "sound-dai", 0);
+	of_node_put(cpu);
+	if (!cpu_dai_node) {
+		dev_err(dev, "parsing cpu/sound-dai failed\n");
+		of_node_put(codec);
+		return -EINVAL;
+	}
+
+	codec_dai_node = of_parse_phandle(codec, "sound-dai", 0);
+	of_node_put(codec);
+	if (!codec_dai_node) {
+		dev_err(dev, "audio-codec property invalid/missing\n");
+		ret = -EINVAL;
+		goto put_cpu_dai_node;
+	}
+
+	for_each_card_prelinks(card, i, dai_link) {
+		dai_link->codecs->of_node = codec_dai_node;
+		dai_link->cpus->of_node = cpu_dai_node;
+		dai_link->platforms->of_node = cpu_dai_node;
+	}
+
+	ret = devm_snd_soc_register_component(dev, &midas_component,
+			midas_ext_dai, ARRAY_SIZE(midas_ext_dai));
+	if (ret < 0) {
+		dev_err(dev, "Failed to register component: %d\n", ret);
+		goto put_codec_dai_node;
+	}
+
+	ret = devm_snd_soc_register_card(dev, card);
+	if (ret < 0) {
+		dev_err(dev, "Failed to register card: %d\n", ret);
+		goto put_codec_dai_node;
+	}
+
+	return 0;
+
+put_codec_dai_node:
+	of_node_put(codec_dai_node);
+put_cpu_dai_node:
+	of_node_put(cpu_dai_node);
+	return ret;
+}
+
+static const struct of_device_id midas_of_match[] = {
+	{ .compatible = "samsung,midas-audio" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, midas_of_match);
+
+static struct platform_driver midas_driver = {
+	.driver = {
+		.name = "midas-audio",
+		.of_match_table = midas_of_match,
+		.pm = &snd_soc_pm_ops,
+	},
+	.probe = midas_probe,
+};
+module_platform_driver(midas_driver);
+
+MODULE_AUTHOR("Simon Shields <simon@lineageos.org>");
+MODULE_DESCRIPTION("ASoC support for Midas");
+MODULE_LICENSE("GPL v2");