Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 189 insertions, 0 deletions

diff --git a/sound/soc/sof/amd/pci-rn.c b/sound/soc/sof/amd/pci-rn.c
new file mode 100644
index 000000000..fca40b261
--- /dev/null
+++ b/sound/soc/sof/amd/pci-rn.c
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+//
+// This file is provided under a dual BSD/GPLv2 license. When using or
+// redistributing this file, you may do so under either license.
+//
+// Copyright(c) 2021 Advanced Micro Devices, Inc. All rights reserved.
+//
+// Authors: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
+
+/*
+ * PCI interface for Renoir ACP device
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <sound/sof.h>
+#include <sound/soc-acpi.h>
+
+#include "../ops.h"
+#include "../sof-pci-dev.h"
+#include "../../amd/mach-config.h"
+#include "acp.h"
+#include "acp-dsp-offset.h"
+
+#define ACP3x_REG_START		0x1240000
+#define ACP3x_REG_END		0x125C000
+
+static struct platform_device *dmic_dev;
+static struct platform_device *pdev;
+
+static const struct resource renoir_res[] = {
+	{
+		.start = 0,
+		.end = ACP3x_REG_END - ACP3x_REG_START,
+		.name = "acp_mem",
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = 0,
+		.end = 0,
+		.name = "acp_dai_irq",
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static const struct sof_amd_acp_desc renoir_chip_info = {
+	.rev		= 3,
+	.host_bridge_id = HOST_BRIDGE_CZN,
+	.i2s_mode	= 0x04,
+	.pgfsm_base	= ACP3X_PGFSM_BASE,
+	.ext_intr_stat	= ACP3X_EXT_INTR_STAT,
+	.dsp_intr_base	= ACP3X_DSP_SW_INTR_BASE,
+	.sram_pte_offset = ACP3X_SRAM_PTE_OFFSET,
+	.i2s_pin_config_offset = ACP3X_I2S_PIN_CONFIG,
+	.hw_semaphore_offset = ACP3X_AXI2DAGB_SEM_0,
+	.acp_clkmux_sel	= ACP3X_CLKMUX_SEL,
+};
+
+static const struct sof_dev_desc renoir_desc = {
+	.machines		= snd_soc_acpi_amd_sof_machines,
+	.use_acpi_target_states	= true,
+	.resindex_lpe_base	= 0,
+	.resindex_pcicfg_base	= -1,
+	.resindex_imr_base	= -1,
+	.irqindex_host_ipc	= -1,
+	.chip_info		= &renoir_chip_info,
+	.ipc_supported_mask	= BIT(SOF_IPC),
+	.ipc_default		= SOF_IPC,
+	.default_fw_path = {
+		[SOF_IPC] = "amd/sof",
+	},
+	.default_tplg_path = {
+		[SOF_IPC] = "amd/sof-tplg",
+	},
+	.default_fw_filename	= {
+		[SOF_IPC] = "sof-rn.ri",
+	},
+	.nocodec_tplg_filename	= "sof-acp.tplg",
+	.ops			= &sof_renoir_ops,
+	.ops_init		= sof_renoir_ops_init,
+};
+
+static int acp_pci_rn_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
+{
+	struct platform_device_info pdevinfo;
+	struct device *dev = &pci->dev;
+	const struct resource *res_i2s;
+	struct resource *res;
+	unsigned int flag, i, addr;
+	int ret;
+
+	flag = snd_amd_acp_find_config(pci);
+	if (flag != FLAG_AMD_SOF && flag != FLAG_AMD_SOF_ONLY_DMIC)
+		return -ENODEV;
+
+	ret = sof_pci_probe(pci, pci_id);
+	if (ret != 0)
+		return ret;
+
+	dmic_dev = platform_device_register_data(dev, "dmic-codec", PLATFORM_DEVID_NONE, NULL, 0);
+	if (IS_ERR(dmic_dev)) {
+		dev_err(dev, "failed to create DMIC device\n");
+		sof_pci_remove(pci);
+		return PTR_ERR(dmic_dev);
+	}
+
+	/* Register platform device only if flag set to FLAG_AMD_SOF_ONLY_DMIC */
+	if (flag != FLAG_AMD_SOF_ONLY_DMIC)
+		return 0;
+
+	addr = pci_resource_start(pci, 0);
+	res = devm_kzalloc(&pci->dev, sizeof(struct resource) * ARRAY_SIZE(renoir_res), GFP_KERNEL);
+	if (!res) {
+		sof_pci_remove(pci);
+		platform_device_unregister(dmic_dev);
+		return -ENOMEM;
+	}
+
+	res_i2s = renoir_res;
+	for (i = 0; i < ARRAY_SIZE(renoir_res); i++, res_i2s++) {
+		res[i].name = res_i2s->name;
+		res[i].flags = res_i2s->flags;
+		res[i].start = addr + res_i2s->start;
+		res[i].end = addr + res_i2s->end;
+		if (res_i2s->flags == IORESOURCE_IRQ) {
+			res[i].start = pci->irq;
+			res[i].end = res[i].start;
+		}
+	}
+
+	memset(&pdevinfo, 0, sizeof(pdevinfo));
+
+	/*
+	 * We have common PCI driver probe for ACP device but we have to support I2S without SOF
+	 * for some distributions. Register platform device that will be used to support non dsp
+	 * ACP's audio ends points on some machines.
+	 */
+
+	pdevinfo.name = "acp_asoc_renoir";
+	pdevinfo.id = 0;
+	pdevinfo.parent = &pci->dev;
+	pdevinfo.num_res = ARRAY_SIZE(renoir_res);
+	pdevinfo.res = &res[0];
+
+	pdev = platform_device_register_full(&pdevinfo);
+	if (IS_ERR(pdev)) {
+		dev_err(&pci->dev, "cannot register %s device\n", pdevinfo.name);
+		sof_pci_remove(pci);
+		platform_device_unregister(dmic_dev);
+		ret = PTR_ERR(pdev);
+	}
+
+	return ret;
+};
+
+static void acp_pci_rn_remove(struct pci_dev *pci)
+{
+	if (dmic_dev)
+		platform_device_unregister(dmic_dev);
+	if (pdev)
+		platform_device_unregister(pdev);
+
+	return sof_pci_remove(pci);
+}
+
+/* PCI IDs */
+static const struct pci_device_id rn_pci_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, ACP_PCI_DEV_ID),
+	.driver_data = (unsigned long)&renoir_desc},
+	{ 0, }
+};
+MODULE_DEVICE_TABLE(pci, rn_pci_ids);
+
+/* pci_driver definition */
+static struct pci_driver snd_sof_pci_amd_rn_driver = {
+	.name = KBUILD_MODNAME,
+	.id_table = rn_pci_ids,
+	.probe = acp_pci_rn_probe,
+	.remove = acp_pci_rn_remove,
+	.driver = {
+		.pm = &sof_pci_pm,
+	},
+};
+module_pci_driver(snd_sof_pci_amd_rn_driver);
+
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_IMPORT_NS(SND_SOC_SOF_AMD_COMMON);
+MODULE_IMPORT_NS(SND_SOC_SOF_PCI_DEV);