Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 276 insertions, 0 deletions

diff --git a/sound/soc/tegra/Kconfig b/sound/soc/tegra/Kconfig
new file mode 100644
index 000000000..b6712a3d1
--- /dev/null
+++ b/sound/soc/tegra/Kconfig
@@ -0,0 +1,276 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config SND_SOC_TEGRA
+	tristate "SoC Audio for the Tegra System-on-Chip"
+	depends on (ARCH_TEGRA && TEGRA20_APB_DMA) || COMPILE_TEST
+	depends on COMMON_CLK
+	depends on RESET_CONTROLLER
+	select REGMAP_MMIO
+	select SND_SOC_GENERIC_DMAENGINE_PCM
+	help
+	  Say Y or M here if you want support for SoC audio on Tegra.
+
+if SND_SOC_TEGRA
+
+config SND_SOC_TEGRA20_AC97
+	tristate "Tegra20 AC97 interface"
+	select SND_SOC_AC97_BUS
+	select SND_SOC_TEGRA20_DAS
+	help
+	  Say Y or M if you want to add support for codecs attached to the
+	  Tegra20 AC97 interface. You will also need to select the individual
+	  machine drivers to support below.
+
+config SND_SOC_TEGRA20_DAS
+	tristate "Tegra20 DAS module"
+	help
+	  Say Y or M if you want to add support for the Tegra20 DAS module.
+	  You will also need to select the individual machine drivers to
+	  support below.
+
+config SND_SOC_TEGRA20_I2S
+	tristate "Tegra20 I2S interface"
+	select SND_SOC_TEGRA20_DAS
+	help
+	  Say Y or M if you want to add support for codecs attached to the
+	  Tegra20 I2S interface. You will also need to select the individual
+	  machine drivers to support below.
+
+config SND_SOC_TEGRA20_SPDIF
+	tristate "Tegra20 SPDIF interface"
+	help
+	  Say Y or M if you want to add support for the Tegra20 SPDIF interface.
+	  You will also need to select the individual machine drivers to support
+	  below.
+
+config SND_SOC_TEGRA30_AHUB
+	tristate "Tegra30 AHUB module"
+	help
+	  Say Y or M if you want to add support for the Tegra30 AHUB module.
+	  You will also need to select the individual machine drivers to
+	  support below.
+
+config SND_SOC_TEGRA30_I2S
+	tristate "Tegra30 I2S interface"
+	select SND_SOC_TEGRA30_AHUB
+	help
+	  Say Y or M if you want to add support for codecs attached to the
+	  Tegra30 I2S interface. You will also need to select the individual
+	  machine drivers to support below.
+
+config SND_SOC_TEGRA210_AHUB
+	tristate "Tegra210 AHUB module"
+	help
+	  Config to enable Audio Hub (AHUB) module, which comprises of a
+	  switch called Audio Crossbar (AXBAR) used to configure or modify
+	  the audio routing path between various HW accelerators present in
+	  AHUB.
+	  Say Y or M if you want to add support for Tegra210 AHUB module.
+
+config SND_SOC_TEGRA210_DMIC
+	tristate "Tegra210 DMIC module"
+	help
+	  Config to enable the Digital MIC (DMIC) controller which is used
+	  to interface with Pulse Density Modulation (PDM) input devices.
+	  The DMIC controller implements a converter to convert PDM signals
+	  to Pulse Code Modulation (PCM) signals. This can be viewed as a
+	  PDM receiver.
+	  Say Y or M if you want to add support for Tegra210 DMIC module.
+
+config SND_SOC_TEGRA210_I2S
+	tristate "Tegra210 I2S module"
+	help
+	  Config to enable the Inter-IC Sound (I2S) Controller which
+	  implements full-duplex and bidirectional and single direction
+	  point-to-point serial interfaces. It can interface with I2S
+	  compatible devices.
+	  Say Y or M if you want to add support for Tegra210 I2S module.
+
+config SND_SOC_TEGRA210_OPE
+	tristate "Tegra210 OPE module"
+	help
+	  Config to enable the Output Processing Engine (OPE) which includes
+	  Parametric Equalizer (PEQ) and Multi Band Dynamic Range Compressor
+	  (MBDRC) sub blocks for data processing. It can support up to 8
+	  channels.
+	  Say Y or M if you want to add support for Tegra210 OPE module.
+
+config SND_SOC_TEGRA186_ASRC
+	tristate "Tegra186 ASRC module"
+	help
+	  Config to enable the Asynchronous Sample Rate Converter (ASRC),
+	  which converts the sampling frequency of the input signal from
+	  one frequency to another. It can handle over a wide range of
+	  sample rate ratios (freq_in/freq_out) from 1:24 to 24:1.
+	  ASRC has two modes of operation. One where ratio can be programmed
+	  in SW and the other where it gets information from ratio estimator
+	  module.
+	  Say Y or M if you want to add support for Tegra186 ASRC module.
+
+config SND_SOC_TEGRA186_DSPK
+	tristate "Tegra186 DSPK module"
+	help
+	  Config to enable the Digital Speaker Controller (DSPK) which
+	  converts the multi-bit Pulse Code Modulation (PCM) audio input to
+	  oversampled 1-bit Pulse Density Modulation (PDM) output. From the
+	  signal flow perspective DSPK can be viewed as a PDM transmitter
+	  that up-samples the input to the desired sampling rate by
+	  interpolation and then converts the oversampled PCM input to
+	  the desired 1-bit output via Delta Sigma Modulation (DSM).
+	  Say Y or M if you want to add support for Tegra186 DSPK module.
+
+config SND_SOC_TEGRA210_ADMAIF
+	tristate "Tegra210 ADMAIF module"
+	help
+	  Config to enable ADMAIF which is the interface between ADMA and
+	  Audio Hub (AHUB). Each ADMA channel that sends/receives data to/
+	  from AHUB must interface through an ADMAIF channel. ADMA channel
+	  sending data to AHUB pairs with an ADMAIF Tx channel, where as
+	  ADMA channel receiving data from AHUB pairs with an ADMAIF Rx
+	  channel. Buffer size is configurable for each ADMAIIF channel.
+	  Say Y or M if you want to add support for Tegra210 ADMAIF module.
+
+config SND_SOC_TEGRA210_MVC
+	tristate "Tegra210 MVC module"
+	help
+	  Config to enable the digital Master Volume Controller (MVC) which
+	  provides gain or attenuation to a digital signal path. It can be
+	  used in input or output signal path. It can be used either for
+	  per-stream volume control or for master volume control.
+	  Say Y or M if you want to add support for Tegra210 MVC module.
+
+config SND_SOC_TEGRA210_SFC
+	tristate "Tegra210 SFC module"
+	help
+	  Config to enable the Sampling Frequency Converter (SFC) which
+	  converts the sampling frequency of input signal to another
+	  frequency. It supports sampling frequency conversion of streams
+	  upto 2 channels (stereo).
+	  Say Y or M if you want to add support for Tegra210 SFC module.
+
+config SND_SOC_TEGRA210_AMX
+	tristate "Tegra210 AMX module"
+	help
+	  Config to enable the Audio Multiplexer (AMX) which can multiplex
+	  four input streams (each of up to 16 channels) and generate
+	  output stream (of up to 16 channels). A byte RAM helps to form an
+	  output frame by any combination of bytes from the input frames.
+	  Say Y or M if you want to add support for Tegra210 AMX module.
+
+config SND_SOC_TEGRA210_ADX
+	tristate "Tegra210 ADX module"
+	help
+	  Config to enable the Audio Demultiplexer (ADX) which takes an
+	  input stream (up to 16 channels) and demultiplexes it into four
+	  output streams (each of up to 16 channels). A byte RAM helps to
+	  form output frames by any combination of bytes from the input
+	  frame. Its design is identical to that of byte RAM in the AMX
+	  except that the data flow direction is reversed.
+	  Say Y or M if you want to add support for Tegra210 ADX module.
+
+config SND_SOC_TEGRA210_MIXER
+	tristate "Tegra210 Mixer module"
+	help
+	  Config to enable the Mixer module which can help to mix multiple
+	  audio streams. It supports mixing of upto 10 input streams,
+	  where each stream can contain maximum of 8 channels. It supports
+	  5 output each of which can be a mix of any combination of 10
+	  input streams.
+	  Say Y or M if you want to add support for Tegra210 Mixer module.
+
+config SND_SOC_TEGRA_AUDIO_GRAPH_CARD
+	tristate "Audio Graph Card based Tegra driver"
+	depends on SND_AUDIO_GRAPH_CARD
+	help
+	  Config to enable Tegra audio machine driver based on generic
+	  audio graph driver. It is a thin driver written to customize
+	  few things for Tegra audio. Most of the code is re-used from
+	  audio graph driver and the same DT bindings are used.
+
+config SND_SOC_TEGRA_MACHINE_DRV
+	tristate
+
+config SND_SOC_TEGRA_RT5640
+	tristate "SoC Audio support for Tegra boards using an RT5640 codec"
+	depends on I2C && GPIOLIB
+	select SND_SOC_TEGRA_MACHINE_DRV
+	select SND_SOC_RT5640
+	help
+	  Say Y or M here if you want to add support for SoC audio on Tegra
+	  boards using the RT5640 codec, such as Dalmore.
+
+config SND_SOC_TEGRA_WM8753
+	tristate "SoC Audio support for Tegra boards using a WM8753 codec"
+	depends on I2C && GPIOLIB
+	select SND_SOC_TEGRA_MACHINE_DRV
+	select SND_SOC_WM8753
+	help
+	  Say Y or M here if you want to add support for SoC audio on Tegra
+	  boards using the WM8753 codec, such as Whistler.
+
+config SND_SOC_TEGRA_WM8903
+	tristate "SoC Audio support for Tegra boards using a WM8903 codec"
+	depends on I2C && GPIOLIB
+	select SND_SOC_TEGRA_MACHINE_DRV
+	select SND_SOC_WM8903
+	help
+	  Say Y or M here if you want to add support for SoC audio on Tegra
+	  boards using the WM8093 codec. Currently, the supported boards are
+	  Harmony, Ventana, Seaboard, Kaen, and Aebl.
+
+config SND_SOC_TEGRA_WM9712
+	tristate "SoC Audio support for Tegra boards using a WM9712 codec"
+	depends on GPIOLIB
+	select SND_SOC_TEGRA_MACHINE_DRV
+	select SND_SOC_TEGRA20_AC97
+	select SND_SOC_WM9712
+	help
+	  Say Y or M here if you want to add support for SoC audio on Tegra
+	  boards using the WM9712 (or compatible) codec.
+
+config SND_SOC_TEGRA_TRIMSLICE
+	tristate "SoC Audio support for TrimSlice board"
+	depends on I2C
+	select SND_SOC_TEGRA_MACHINE_DRV
+	select SND_SOC_TLV320AIC23_I2C
+	help
+	  Say Y or M here if you want to add support for SoC audio on the
+	  TrimSlice platform.
+
+config SND_SOC_TEGRA_ALC5632
+	tristate "SoC Audio support for Tegra boards using an ALC5632 codec"
+	depends on I2C && GPIOLIB
+	select SND_SOC_TEGRA_MACHINE_DRV
+	select SND_SOC_ALC5632
+	help
+	  Say Y or M here if you want to add support for SoC audio on the
+	  Toshiba AC100 netbook.
+
+config SND_SOC_TEGRA_MAX98090
+	tristate "SoC Audio support for Tegra boards using a MAX98090 codec"
+	depends on I2C && GPIOLIB
+	select SND_SOC_TEGRA_MACHINE_DRV
+	select SND_SOC_MAX98090
+	help
+	  Say Y or M here if you want to add support for SoC audio on Tegra
+	  boards using the MAX98090 codec, such as Venice2.
+
+config SND_SOC_TEGRA_RT5677
+	tristate "SoC Audio support for Tegra boards using a RT5677 codec"
+	depends on I2C && GPIOLIB
+	select SND_SOC_TEGRA_MACHINE_DRV
+	select SND_SOC_RT5677
+	help
+	  Say Y or M here if you want to add support for SoC audio on Tegra
+	  boards using the RT5677 codec, such as Ryu.
+
+config SND_SOC_TEGRA_SGTL5000
+	tristate "SoC Audio support for Tegra boards using a SGTL5000 codec"
+	depends on I2C && GPIOLIB
+	select SND_SOC_TEGRA_MACHINE_DRV
+	select SND_SOC_SGTL5000
+	help
+	  Say Y or M here if you want to add support for SoC audio on Tegra
+	  boards using the SGTL5000 codec, such as Apalis T30, Apalis TK1 or
+	  Colibri T30.
+
+endif