Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 582 insertions, 0 deletions

diff --git a/sound/usb/line6/toneport.c b/sound/usb/line6/toneport.c
new file mode 100644
index 000000000..e33df5874
--- /dev/null
+++ b/sound/usb/line6/toneport.c
@@ -0,0 +1,582 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Line 6 Linux USB driver
+ *
+ * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
+ *                         Emil Myhrman (emil.myhrman@gmail.com)
+ */
+
+#include <linux/wait.h>
+#include <linux/usb.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/leds.h>
+#include <sound/core.h>
+#include <sound/control.h>
+
+#include "capture.h"
+#include "driver.h"
+#include "playback.h"
+
+enum line6_device_type {
+	LINE6_GUITARPORT,
+	LINE6_PODSTUDIO_GX,
+	LINE6_PODSTUDIO_UX1,
+	LINE6_PODSTUDIO_UX2,
+	LINE6_TONEPORT_GX,
+	LINE6_TONEPORT_UX1,
+	LINE6_TONEPORT_UX2,
+};
+
+struct usb_line6_toneport;
+
+struct toneport_led {
+	struct led_classdev dev;
+	char name[64];
+	struct usb_line6_toneport *toneport;
+	bool registered;
+};
+
+struct usb_line6_toneport {
+	/* Generic Line 6 USB data */
+	struct usb_line6 line6;
+
+	/* Source selector */
+	int source;
+
+	/* Serial number of device */
+	u32 serial_number;
+
+	/* Firmware version (x 100) */
+	u8 firmware_version;
+
+	/* Device type */
+	enum line6_device_type type;
+
+	/* LED instances */
+	struct toneport_led leds[2];
+};
+
+#define line6_to_toneport(x) container_of(x, struct usb_line6_toneport, line6)
+
+static int toneport_send_cmd(struct usb_device *usbdev, int cmd1, int cmd2);
+
+#define TONEPORT_PCM_DELAY 1
+
+static const struct snd_ratden toneport_ratden = {
+	.num_min = 44100,
+	.num_max = 44100,
+	.num_step = 1,
+	.den = 1
+};
+
+static struct line6_pcm_properties toneport_pcm_properties = {
+	.playback_hw = {
+				  .info = (SNDRV_PCM_INFO_MMAP |
+					   SNDRV_PCM_INFO_INTERLEAVED |
+					   SNDRV_PCM_INFO_BLOCK_TRANSFER |
+					   SNDRV_PCM_INFO_MMAP_VALID |
+					   SNDRV_PCM_INFO_PAUSE |
+					   SNDRV_PCM_INFO_SYNC_START),
+				  .formats = SNDRV_PCM_FMTBIT_S16_LE,
+				  .rates = SNDRV_PCM_RATE_KNOT,
+				  .rate_min = 44100,
+				  .rate_max = 44100,
+				  .channels_min = 2,
+				  .channels_max = 2,
+				  .buffer_bytes_max = 60000,
+				  .period_bytes_min = 64,
+				  .period_bytes_max = 8192,
+				  .periods_min = 1,
+				  .periods_max = 1024},
+	.capture_hw = {
+				 .info = (SNDRV_PCM_INFO_MMAP |
+					  SNDRV_PCM_INFO_INTERLEAVED |
+					  SNDRV_PCM_INFO_BLOCK_TRANSFER |
+					  SNDRV_PCM_INFO_MMAP_VALID |
+					  SNDRV_PCM_INFO_SYNC_START),
+				 .formats = SNDRV_PCM_FMTBIT_S16_LE,
+				 .rates = SNDRV_PCM_RATE_KNOT,
+				 .rate_min = 44100,
+				 .rate_max = 44100,
+				 .channels_min = 2,
+				 .channels_max = 2,
+				 .buffer_bytes_max = 60000,
+				 .period_bytes_min = 64,
+				 .period_bytes_max = 8192,
+				 .periods_min = 1,
+				 .periods_max = 1024},
+	.rates = {
+			    .nrats = 1,
+			    .rats = &toneport_ratden},
+	.bytes_per_channel = 2
+};
+
+static const struct {
+	const char *name;
+	int code;
+} toneport_source_info[] = {
+	{"Microphone", 0x0a01},
+	{"Line", 0x0801},
+	{"Instrument", 0x0b01},
+	{"Inst & Mic", 0x0901}
+};
+
+static int toneport_send_cmd(struct usb_device *usbdev, int cmd1, int cmd2)
+{
+	int ret;
+
+	ret = usb_control_msg_send(usbdev, 0, 0x67,
+				   USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
+				   cmd1, cmd2, NULL, 0, LINE6_TIMEOUT,
+				   GFP_KERNEL);
+
+	if (ret) {
+		dev_err(&usbdev->dev, "send failed (error %d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/* monitor info callback */
+static int snd_toneport_monitor_info(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 256;
+	return 0;
+}
+
+/* monitor get callback */
+static int snd_toneport_monitor_get(struct snd_kcontrol *kcontrol,
+				    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+
+	ucontrol->value.integer.value[0] = line6pcm->volume_monitor;
+	return 0;
+}
+
+/* monitor put callback */
+static int snd_toneport_monitor_put(struct snd_kcontrol *kcontrol,
+				    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+	int err;
+
+	if (ucontrol->value.integer.value[0] == line6pcm->volume_monitor)
+		return 0;
+
+	line6pcm->volume_monitor = ucontrol->value.integer.value[0];
+
+	if (line6pcm->volume_monitor > 0) {
+		err = line6_pcm_acquire(line6pcm, LINE6_STREAM_MONITOR, true);
+		if (err < 0) {
+			line6pcm->volume_monitor = 0;
+			line6_pcm_release(line6pcm, LINE6_STREAM_MONITOR);
+			return err;
+		}
+	} else {
+		line6_pcm_release(line6pcm, LINE6_STREAM_MONITOR);
+	}
+
+	return 1;
+}
+
+/* source info callback */
+static int snd_toneport_source_info(struct snd_kcontrol *kcontrol,
+				    struct snd_ctl_elem_info *uinfo)
+{
+	const int size = ARRAY_SIZE(toneport_source_info);
+
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	uinfo->count = 1;
+	uinfo->value.enumerated.items = size;
+
+	if (uinfo->value.enumerated.item >= size)
+		uinfo->value.enumerated.item = size - 1;
+
+	strcpy(uinfo->value.enumerated.name,
+	       toneport_source_info[uinfo->value.enumerated.item].name);
+
+	return 0;
+}
+
+/* source get callback */
+static int snd_toneport_source_get(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+	struct usb_line6_toneport *toneport = line6_to_toneport(line6pcm->line6);
+
+	ucontrol->value.enumerated.item[0] = toneport->source;
+	return 0;
+}
+
+/* source put callback */
+static int snd_toneport_source_put(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
+	struct usb_line6_toneport *toneport = line6_to_toneport(line6pcm->line6);
+	unsigned int source;
+
+	source = ucontrol->value.enumerated.item[0];
+	if (source >= ARRAY_SIZE(toneport_source_info))
+		return -EINVAL;
+	if (source == toneport->source)
+		return 0;
+
+	toneport->source = source;
+	toneport_send_cmd(toneport->line6.usbdev,
+			  toneport_source_info[source].code, 0x0000);
+	return 1;
+}
+
+static void toneport_startup(struct usb_line6 *line6)
+{
+	line6_pcm_acquire(line6->line6pcm, LINE6_STREAM_MONITOR, true);
+}
+
+/* control definition */
+static const struct snd_kcontrol_new toneport_control_monitor = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Monitor Playback Volume",
+	.index = 0,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.info = snd_toneport_monitor_info,
+	.get = snd_toneport_monitor_get,
+	.put = snd_toneport_monitor_put
+};
+
+/* source selector definition */
+static const struct snd_kcontrol_new toneport_control_source = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "PCM Capture Source",
+	.index = 0,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.info = snd_toneport_source_info,
+	.get = snd_toneport_source_get,
+	.put = snd_toneport_source_put
+};
+
+/*
+	For the led on Guitarport.
+	Brightness goes from 0x00 to 0x26. Set a value above this to have led
+	blink.
+	(void cmd_0x02(byte red, byte green)
+*/
+
+static bool toneport_has_led(struct usb_line6_toneport *toneport)
+{
+	switch (toneport->type) {
+	case LINE6_GUITARPORT:
+	case LINE6_TONEPORT_GX:
+	/* add your device here if you are missing support for the LEDs */
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+static const char * const toneport_led_colors[2] = { "red", "green" };
+static const int toneport_led_init_vals[2] = { 0x00, 0x26 };
+
+static void toneport_update_led(struct usb_line6_toneport *toneport)
+{
+	toneport_send_cmd(toneport->line6.usbdev,
+			  (toneport->leds[0].dev.brightness << 8) | 0x0002,
+			  toneport->leds[1].dev.brightness);
+}
+
+static void toneport_led_brightness_set(struct led_classdev *led_cdev,
+					enum led_brightness brightness)
+{
+	struct toneport_led *leds =
+		container_of(led_cdev, struct toneport_led, dev);
+	toneport_update_led(leds->toneport);
+}
+
+static int toneport_init_leds(struct usb_line6_toneport *toneport)
+{
+	struct device *dev = &toneport->line6.usbdev->dev;
+	int i, err;
+
+	for (i = 0; i < 2; i++) {
+		struct toneport_led *led = &toneport->leds[i];
+		struct led_classdev *leddev = &led->dev;
+
+		led->toneport = toneport;
+		snprintf(led->name, sizeof(led->name), "%s::%s",
+			 dev_name(dev), toneport_led_colors[i]);
+		leddev->name = led->name;
+		leddev->brightness = toneport_led_init_vals[i];
+		leddev->max_brightness = 0x26;
+		leddev->brightness_set = toneport_led_brightness_set;
+		err = led_classdev_register(dev, leddev);
+		if (err)
+			return err;
+		led->registered = true;
+	}
+
+	return 0;
+}
+
+static void toneport_remove_leds(struct usb_line6_toneport *toneport)
+{
+	struct toneport_led *led;
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		led = &toneport->leds[i];
+		if (!led->registered)
+			break;
+		led_classdev_unregister(&led->dev);
+		led->registered = false;
+	}
+}
+
+static bool toneport_has_source_select(struct usb_line6_toneport *toneport)
+{
+	switch (toneport->type) {
+	case LINE6_TONEPORT_UX1:
+	case LINE6_TONEPORT_UX2:
+	case LINE6_PODSTUDIO_UX1:
+	case LINE6_PODSTUDIO_UX2:
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+/*
+	Setup Toneport device.
+*/
+static int toneport_setup(struct usb_line6_toneport *toneport)
+{
+	u32 *ticks;
+	struct usb_line6 *line6 = &toneport->line6;
+	struct usb_device *usbdev = line6->usbdev;
+
+	ticks = kmalloc(sizeof(*ticks), GFP_KERNEL);
+	if (!ticks)
+		return -ENOMEM;
+
+	/* sync time on device with host: */
+	/* note: 32-bit timestamps overflow in year 2106 */
+	*ticks = (u32)ktime_get_real_seconds();
+	line6_write_data(line6, 0x80c6, ticks, 4);
+	kfree(ticks);
+
+	/* enable device: */
+	toneport_send_cmd(usbdev, 0x0301, 0x0000);
+
+	/* initialize source select: */
+	if (toneport_has_source_select(toneport))
+		toneport_send_cmd(usbdev,
+				  toneport_source_info[toneport->source].code,
+				  0x0000);
+
+	if (toneport_has_led(toneport))
+		toneport_update_led(toneport);
+
+	schedule_delayed_work(&toneport->line6.startup_work,
+			      msecs_to_jiffies(TONEPORT_PCM_DELAY * 1000));
+	return 0;
+}
+
+/*
+	Toneport device disconnected.
+*/
+static void line6_toneport_disconnect(struct usb_line6 *line6)
+{
+	struct usb_line6_toneport *toneport = line6_to_toneport(line6);
+
+	if (toneport_has_led(toneport))
+		toneport_remove_leds(toneport);
+}
+
+
+/*
+	 Try to init Toneport device.
+*/
+static int toneport_init(struct usb_line6 *line6,
+			 const struct usb_device_id *id)
+{
+	int err;
+	struct usb_line6_toneport *toneport = line6_to_toneport(line6);
+
+	toneport->type = id->driver_info;
+
+	line6->disconnect = line6_toneport_disconnect;
+	line6->startup = toneport_startup;
+
+	/* initialize PCM subsystem: */
+	err = line6_init_pcm(line6, &toneport_pcm_properties);
+	if (err < 0)
+		return err;
+
+	/* register monitor control: */
+	err = snd_ctl_add(line6->card,
+			  snd_ctl_new1(&toneport_control_monitor,
+				       line6->line6pcm));
+	if (err < 0)
+		return err;
+
+	/* register source select control: */
+	if (toneport_has_source_select(toneport)) {
+		err =
+		    snd_ctl_add(line6->card,
+				snd_ctl_new1(&toneport_control_source,
+					     line6->line6pcm));
+		if (err < 0)
+			return err;
+	}
+
+	line6_read_serial_number(line6, &toneport->serial_number);
+	line6_read_data(line6, 0x80c2, &toneport->firmware_version, 1);
+
+	if (toneport_has_led(toneport)) {
+		err = toneport_init_leds(toneport);
+		if (err < 0)
+			return err;
+	}
+
+	err = toneport_setup(toneport);
+	if (err)
+		return err;
+
+	/* register audio system: */
+	return snd_card_register(line6->card);
+}
+
+#ifdef CONFIG_PM
+/*
+	Resume Toneport device after reset.
+*/
+static int toneport_reset_resume(struct usb_interface *interface)
+{
+	int err;
+
+	err = toneport_setup(usb_get_intfdata(interface));
+	if (err)
+		return err;
+	return line6_resume(interface);
+}
+#endif
+
+#define LINE6_DEVICE(prod) USB_DEVICE(0x0e41, prod)
+#define LINE6_IF_NUM(prod, n) USB_DEVICE_INTERFACE_NUMBER(0x0e41, prod, n)
+
+/* table of devices that work with this driver */
+static const struct usb_device_id toneport_id_table[] = {
+	{ LINE6_DEVICE(0x4750),    .driver_info = LINE6_GUITARPORT },
+	{ LINE6_DEVICE(0x4153),    .driver_info = LINE6_PODSTUDIO_GX },
+	{ LINE6_DEVICE(0x4150),    .driver_info = LINE6_PODSTUDIO_UX1 },
+	{ LINE6_IF_NUM(0x4151, 0), .driver_info = LINE6_PODSTUDIO_UX2 },
+	{ LINE6_DEVICE(0x4147),    .driver_info = LINE6_TONEPORT_GX },
+	{ LINE6_DEVICE(0x4141),    .driver_info = LINE6_TONEPORT_UX1 },
+	{ LINE6_IF_NUM(0x4142, 0), .driver_info = LINE6_TONEPORT_UX2 },
+	{}
+};
+
+MODULE_DEVICE_TABLE(usb, toneport_id_table);
+
+static const struct line6_properties toneport_properties_table[] = {
+	[LINE6_GUITARPORT] = {
+		.id = "GuitarPort",
+		.name = "GuitarPort",
+		.capabilities	= LINE6_CAP_PCM,
+		.altsetting = 2,  /* 1..4 seem to be ok */
+		/* no control channel */
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_PODSTUDIO_GX] = {
+		.id = "PODStudioGX",
+		.name = "POD Studio GX",
+		.capabilities	= LINE6_CAP_PCM,
+		.altsetting = 2,  /* 1..4 seem to be ok */
+		/* no control channel */
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_PODSTUDIO_UX1] = {
+		.id = "PODStudioUX1",
+		.name = "POD Studio UX1",
+		.capabilities	= LINE6_CAP_PCM,
+		.altsetting = 2,  /* 1..4 seem to be ok */
+		/* no control channel */
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_PODSTUDIO_UX2] = {
+		.id = "PODStudioUX2",
+		.name = "POD Studio UX2",
+		.capabilities	= LINE6_CAP_PCM,
+		.altsetting = 2,  /* defaults to 44.1kHz, 16-bit */
+		/* no control channel */
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_TONEPORT_GX] = {
+		.id = "TonePortGX",
+		.name = "TonePort GX",
+		.capabilities	= LINE6_CAP_PCM,
+		.altsetting = 2,  /* 1..4 seem to be ok */
+		/* no control channel */
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_TONEPORT_UX1] = {
+		.id = "TonePortUX1",
+		.name = "TonePort UX1",
+		.capabilities	= LINE6_CAP_PCM,
+		.altsetting = 2,  /* 1..4 seem to be ok */
+		/* no control channel */
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+	[LINE6_TONEPORT_UX2] = {
+		.id = "TonePortUX2",
+		.name = "TonePort UX2",
+		.capabilities	= LINE6_CAP_PCM,
+		.altsetting = 2,  /* defaults to 44.1kHz, 16-bit */
+		/* no control channel */
+		.ep_audio_r = 0x82,
+		.ep_audio_w = 0x01,
+	},
+};
+
+/*
+	Probe USB device.
+*/
+static int toneport_probe(struct usb_interface *interface,
+			  const struct usb_device_id *id)
+{
+	return line6_probe(interface, id, "Line6-TonePort",
+			   &toneport_properties_table[id->driver_info],
+			   toneport_init, sizeof(struct usb_line6_toneport));
+}
+
+static struct usb_driver toneport_driver = {
+	.name = KBUILD_MODNAME,
+	.probe = toneport_probe,
+	.disconnect = line6_disconnect,
+#ifdef CONFIG_PM
+	.suspend = line6_suspend,
+	.resume = line6_resume,
+	.reset_resume = toneport_reset_resume,
+#endif
+	.id_table = toneport_id_table,
+};
+
+module_usb_driver(toneport_driver);
+
+MODULE_DESCRIPTION("TonePort USB driver");
+MODULE_LICENSE("GPL");