Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 226 insertions, 0 deletions

diff --git a/tools/cgroup/memcg_slabinfo.py b/tools/cgroup/memcg_slabinfo.py
new file mode 100644
index 000000000..1d3a90d93
--- /dev/null
+++ b/tools/cgroup/memcg_slabinfo.py
@@ -0,0 +1,226 @@
+#!/usr/bin/env drgn
+#
+# Copyright (C) 2020 Roman Gushchin <guro@fb.com>
+# Copyright (C) 2020 Facebook
+
+from os import stat
+import argparse
+import sys
+
+from drgn.helpers.linux import list_for_each_entry, list_empty
+from drgn.helpers.linux import for_each_page
+from drgn.helpers.linux.cpumask import for_each_online_cpu
+from drgn.helpers.linux.percpu import per_cpu_ptr
+from drgn import container_of, FaultError, Object, cast
+
+
+DESC = """
+This is a drgn script to provide slab statistics for memory cgroups.
+It supports cgroup v2 and v1 and can emulate memory.kmem.slabinfo
+interface of cgroup v1.
+For drgn, visit https://github.com/osandov/drgn.
+"""
+
+
+MEMCGS = {}
+
+OO_SHIFT = 16
+OO_MASK = ((1 << OO_SHIFT) - 1)
+
+
+def err(s):
+    print('slabinfo.py: error: %s' % s, file=sys.stderr, flush=True)
+    sys.exit(1)
+
+
+def find_memcg_ids(css=prog['root_mem_cgroup'].css, prefix=''):
+    if not list_empty(css.children.address_of_()):
+        for css in list_for_each_entry('struct cgroup_subsys_state',
+                                       css.children.address_of_(),
+                                       'sibling'):
+            name = prefix + '/' + css.cgroup.kn.name.string_().decode('utf-8')
+            memcg = container_of(css, 'struct mem_cgroup', 'css')
+            MEMCGS[css.cgroup.kn.id.value_()] = memcg
+            find_memcg_ids(css, name)
+
+
+def is_root_cache(s):
+    try:
+        return False if s.memcg_params.root_cache else True
+    except AttributeError:
+        return True
+
+
+def cache_name(s):
+    if is_root_cache(s):
+        return s.name.string_().decode('utf-8')
+    else:
+        return s.memcg_params.root_cache.name.string_().decode('utf-8')
+
+
+# SLUB
+
+def oo_order(s):
+    return s.oo.x >> OO_SHIFT
+
+
+def oo_objects(s):
+    return s.oo.x & OO_MASK
+
+
+def count_partial(n, fn):
+    nr_objs = 0
+    for slab in list_for_each_entry('struct slab', n.partial.address_of_(),
+                                    'slab_list'):
+         nr_objs += fn(slab)
+    return nr_objs
+
+
+def count_free(slab):
+    return slab.objects - slab.inuse
+
+
+def slub_get_slabinfo(s, cfg):
+    nr_slabs = 0
+    nr_objs = 0
+    nr_free = 0
+
+    for node in range(cfg['nr_nodes']):
+        n = s.node[node]
+        nr_slabs += n.nr_slabs.counter.value_()
+        nr_objs += n.total_objects.counter.value_()
+        nr_free += count_partial(n, count_free)
+
+    return {'active_objs': nr_objs - nr_free,
+            'num_objs': nr_objs,
+            'active_slabs': nr_slabs,
+            'num_slabs': nr_slabs,
+            'objects_per_slab': oo_objects(s),
+            'cache_order': oo_order(s),
+            'limit': 0,
+            'batchcount': 0,
+            'shared': 0,
+            'shared_avail': 0}
+
+
+def cache_show(s, cfg, objs):
+    if cfg['allocator'] == 'SLUB':
+        sinfo = slub_get_slabinfo(s, cfg)
+    else:
+        err('SLAB isn\'t supported yet')
+
+    if cfg['shared_slab_pages']:
+        sinfo['active_objs'] = objs
+        sinfo['num_objs'] = objs
+
+    print('%-17s %6lu %6lu %6u %4u %4d'
+          ' : tunables %4u %4u %4u'
+          ' : slabdata %6lu %6lu %6lu' % (
+              cache_name(s), sinfo['active_objs'], sinfo['num_objs'],
+              s.size, sinfo['objects_per_slab'], 1 << sinfo['cache_order'],
+              sinfo['limit'], sinfo['batchcount'], sinfo['shared'],
+              sinfo['active_slabs'], sinfo['num_slabs'],
+              sinfo['shared_avail']))
+
+
+def detect_kernel_config():
+    cfg = {}
+
+    cfg['nr_nodes'] = prog['nr_online_nodes'].value_()
+
+    if prog.type('struct kmem_cache').members[1].name == 'flags':
+        cfg['allocator'] = 'SLUB'
+    elif prog.type('struct kmem_cache').members[1].name == 'batchcount':
+        cfg['allocator'] = 'SLAB'
+    else:
+        err('Can\'t determine the slab allocator')
+
+    cfg['shared_slab_pages'] = False
+    try:
+        if prog.type('struct obj_cgroup'):
+            cfg['shared_slab_pages'] = True
+    except:
+        pass
+
+    return cfg
+
+
+def for_each_slab(prog):
+    PGSlab = 1 << prog.constant('PG_slab')
+    PGHead = 1 << prog.constant('PG_head')
+
+    for page in for_each_page(prog):
+        try:
+            if page.flags.value_() & PGSlab:
+                yield cast('struct slab *', page)
+        except FaultError:
+            pass
+
+
+def main():
+    parser = argparse.ArgumentParser(description=DESC,
+                                     formatter_class=
+                                     argparse.RawTextHelpFormatter)
+    parser.add_argument('cgroup', metavar='CGROUP',
+                        help='Target memory cgroup')
+    args = parser.parse_args()
+
+    try:
+        cgroup_id = stat(args.cgroup).st_ino
+        find_memcg_ids()
+        memcg = MEMCGS[cgroup_id]
+    except KeyError:
+        err('Can\'t find the memory cgroup')
+
+    cfg = detect_kernel_config()
+
+    print('# name            <active_objs> <num_objs> <objsize> <objperslab> <pagesperslab>'
+          ' : tunables <limit> <batchcount> <sharedfactor>'
+          ' : slabdata <active_slabs> <num_slabs> <sharedavail>')
+
+    if cfg['shared_slab_pages']:
+        obj_cgroups = set()
+        stats = {}
+        caches = {}
+
+        # find memcg pointers belonging to the specified cgroup
+        obj_cgroups.add(memcg.objcg.value_())
+        for ptr in list_for_each_entry('struct obj_cgroup',
+                                       memcg.objcg_list.address_of_(),
+                                       'list'):
+            obj_cgroups.add(ptr.value_())
+
+        # look over all slab folios and look for objects belonging
+        # to the given memory cgroup
+        for slab in for_each_slab(prog):
+            objcg_vec_raw = slab.memcg_data.value_()
+            if objcg_vec_raw == 0:
+                continue
+            cache = slab.slab_cache
+            if not cache:
+                continue
+            addr = cache.value_()
+            caches[addr] = cache
+            # clear the lowest bit to get the true obj_cgroups
+            objcg_vec = Object(prog, 'struct obj_cgroup **',
+                               value=objcg_vec_raw & ~1)
+
+            if addr not in stats:
+                stats[addr] = 0
+
+            for i in range(oo_objects(cache)):
+                if objcg_vec[i].value_() in obj_cgroups:
+                    stats[addr] += 1
+
+        for addr in caches:
+            if stats[addr] > 0:
+                cache_show(caches[addr], cfg, stats[addr])
+
+    else:
+        for s in list_for_each_entry('struct kmem_cache',
+                                     memcg.kmem_caches.address_of_(),
+                                     'memcg_params.kmem_caches_node'):
+            cache_show(s, cfg, None)
+
+
+main()