Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 298 insertions, 0 deletions

diff --git a/tools/perf/perf-completion.sh b/tools/perf/perf-completion.sh
new file mode 100644
index 000000000..fdf75d45e
--- /dev/null
+++ b/tools/perf/perf-completion.sh
@@ -0,0 +1,298 @@
+# perf bash and zsh completion
+# SPDX-License-Identifier: GPL-2.0
+
+# Taken from git.git's completion script.
+__my_reassemble_comp_words_by_ref()
+{
+	local exclude i j first
+	# Which word separators to exclude?
+	exclude="${1//[^$COMP_WORDBREAKS]}"
+	cword_=$COMP_CWORD
+	if [ -z "$exclude" ]; then
+		words_=("${COMP_WORDS[@]}")
+		return
+	fi
+	# List of word completion separators has shrunk;
+	# re-assemble words to complete.
+	for ((i=0, j=0; i < ${#COMP_WORDS[@]}; i++, j++)); do
+		# Append each nonempty word consisting of just
+		# word separator characters to the current word.
+		first=t
+		while
+			[ $i -gt 0 ] &&
+			[ -n "${COMP_WORDS[$i]}" ] &&
+			# word consists of excluded word separators
+			[ "${COMP_WORDS[$i]//[^$exclude]}" = "${COMP_WORDS[$i]}" ]
+		do
+			# Attach to the previous token,
+			# unless the previous token is the command name.
+			if [ $j -ge 2 ] && [ -n "$first" ]; then
+				((j--))
+			fi
+			first=
+			words_[$j]=${words_[j]}${COMP_WORDS[i]}
+			if [ $i = $COMP_CWORD ]; then
+				cword_=$j
+			fi
+			if (($i < ${#COMP_WORDS[@]} - 1)); then
+				((i++))
+			else
+				# Done.
+				return
+			fi
+		done
+		words_[$j]=${words_[j]}${COMP_WORDS[i]}
+		if [ $i = $COMP_CWORD ]; then
+			cword_=$j
+		fi
+	done
+}
+
+# Define preload_get_comp_words_by_ref="false", if the function
+# __perf_get_comp_words_by_ref() is required instead.
+preload_get_comp_words_by_ref="true"
+
+if [ $preload_get_comp_words_by_ref = "true" ]; then
+	type _get_comp_words_by_ref &>/dev/null ||
+	preload_get_comp_words_by_ref="false"
+fi
+[ $preload_get_comp_words_by_ref = "true" ] ||
+__perf_get_comp_words_by_ref()
+{
+	local exclude cur_ words_ cword_
+	if [ "$1" = "-n" ]; then
+		exclude=$2
+		shift 2
+	fi
+	__my_reassemble_comp_words_by_ref "$exclude"
+	cur_=${words_[cword_]}
+	while [ $# -gt 0 ]; do
+		case "$1" in
+		cur)
+			cur=$cur_
+			;;
+		prev)
+			prev=${words_[$cword_-1]}
+			;;
+		words)
+			words=("${words_[@]}")
+			;;
+		cword)
+			cword=$cword_
+			;;
+		esac
+		shift
+	done
+}
+
+# Define preload__ltrim_colon_completions="false", if the function
+# __perf__ltrim_colon_completions() is required instead.
+preload__ltrim_colon_completions="true"
+
+if [ $preload__ltrim_colon_completions = "true" ]; then
+	type __ltrim_colon_completions &>/dev/null ||
+	preload__ltrim_colon_completions="false"
+fi
+[ $preload__ltrim_colon_completions = "true" ] ||
+__perf__ltrim_colon_completions()
+{
+	if [[ "$1" == *:* && "$COMP_WORDBREAKS" == *:* ]]; then
+		# Remove colon-word prefix from COMPREPLY items
+		local colon_word=${1%"${1##*:}"}
+		local i=${#COMPREPLY[*]}
+		while [[ $((--i)) -ge 0 ]]; do
+			COMPREPLY[$i]=${COMPREPLY[$i]#"$colon_word"}
+		done
+	fi
+}
+
+__perfcomp ()
+{
+	COMPREPLY=( $( compgen -W "$1" -- "$2" ) )
+}
+
+__perfcomp_colon ()
+{
+	__perfcomp "$1" "$2"
+	if [ $preload__ltrim_colon_completions = "true" ]; then
+		__ltrim_colon_completions $cur
+	else
+		__perf__ltrim_colon_completions $cur
+	fi
+}
+
+__perf_prev_skip_opts ()
+{
+	local i cmd_ cmds_
+
+	let i=cword-1
+	cmds_=$($cmd $1 --list-cmds)
+	prev_skip_opts=()
+	while [ $i -ge 0 ]; do
+		if [[ ${words[i]} == $1 ]]; then
+			return
+		fi
+		for cmd_ in $cmds_; do
+			if [[ ${words[i]} == $cmd_ ]]; then
+				prev_skip_opts=${words[i]}
+				return
+			fi
+		done
+		((i--))
+	done
+}
+
+__perf_main ()
+{
+	local cmd
+
+	cmd=${words[0]}
+	COMPREPLY=()
+
+	# Skip options backward and find the last perf command
+	__perf_prev_skip_opts
+	# List perf subcommands or long options
+	if [ -z $prev_skip_opts ]; then
+		if [[ $cur == --* ]]; then
+			cmds=$($cmd --list-opts)
+		else
+			cmds=$($cmd --list-cmds)
+		fi
+		__perfcomp "$cmds" "$cur"
+	# List possible events for -e option
+	elif [[ $prev == @("-e"|"--event") &&
+		$prev_skip_opts == @(record|stat|top) ]]; then
+
+		local cur1=${COMP_WORDS[COMP_CWORD]}
+		local raw_evts=$($cmd list --raw-dump)
+		local arr s tmp result
+
+		if [[ "$cur1" == */* && ${cur1#*/} =~ ^[A-Z] ]]; then
+			OLD_IFS="$IFS"
+			IFS=" "
+			arr=($raw_evts)
+			IFS="$OLD_IFS"
+
+			for s in ${arr[@]}
+			do
+				if [[ "$s" == *cpu/* ]]; then
+					tmp=${s#*cpu/}
+					result=$result" ""cpu/"${tmp^^}
+				else
+					result=$result" "$s
+				fi
+			done
+
+			evts=${result}" "$(ls /sys/bus/event_source/devices/cpu/events)
+		else
+			evts=${raw_evts}" "$(ls /sys/bus/event_source/devices/cpu/events)
+		fi
+
+		if [[ "$cur1" == , ]]; then
+			__perfcomp_colon "$evts" ""
+		else
+			__perfcomp_colon "$evts" "$cur1"
+		fi
+	else
+		# List subcommands for perf commands
+		if [[ $prev_skip_opts == @(kvm|kmem|mem|lock|sched|
+			|data|help|script|test|timechart|trace) ]]; then
+			subcmds=$($cmd $prev_skip_opts --list-cmds)
+			__perfcomp_colon "$subcmds" "$cur"
+		fi
+		# List long option names
+		if [[ $cur == --* ]];  then
+			subcmd=$prev_skip_opts
+			__perf_prev_skip_opts $subcmd
+			subcmd=$subcmd" "$prev_skip_opts
+			opts=$($cmd $subcmd --list-opts)
+			__perfcomp "$opts" "$cur"
+		fi
+	fi
+}
+
+if [[ -n ${ZSH_VERSION-} ]]; then
+	autoload -U +X compinit && compinit
+
+	__perfcomp ()
+	{
+		emulate -L zsh
+
+		local c IFS=$' \t\n'
+		local -a array
+
+		for c in ${=1}; do
+			case $c in
+			--*=*|*.) ;;
+			*) c="$c " ;;
+			esac
+			array[${#array[@]}+1]="$c"
+		done
+
+		compset -P '*[=:]'
+		compadd -Q -S '' -a -- array && _ret=0
+	}
+
+	__perfcomp_colon ()
+	{
+		emulate -L zsh
+
+		local cur_="${2-$cur}"
+		local c IFS=$' \t\n'
+		local -a array
+
+		if [[ "$cur_" == *:* ]]; then
+			local colon_word=${cur_%"${cur_##*:}"}
+		fi
+
+		for c in ${=1}; do
+			case $c in
+			--*=*|*.) ;;
+			*) c="$c " ;;
+			esac
+			array[$#array+1]=${c#"$colon_word"}
+		done
+
+		compset -P '*[=:]'
+		compadd -Q -S '' -a -- array && _ret=0
+	}
+
+	_perf ()
+	{
+		local _ret=1 cur cword prev
+		cur=${words[CURRENT]}
+		prev=${words[CURRENT-1]}
+		let cword=CURRENT-1
+		emulate ksh -c __perf_main
+		let _ret && _default && _ret=0
+		return _ret
+	}
+
+	compdef _perf perf
+	return
+fi
+
+type perf &>/dev/null &&
+_perf()
+{
+	if [[ "$COMP_WORDBREAKS" != *,* ]]; then
+		COMP_WORDBREAKS="${COMP_WORDBREAKS},"
+		export COMP_WORDBREAKS
+	fi
+
+	if [[ "$COMP_WORDBREAKS" == *:* ]]; then
+		COMP_WORDBREAKS="${COMP_WORDBREAKS/:/}"
+		export COMP_WORDBREAKS
+	fi
+
+	local cur words cword prev
+	if [ $preload_get_comp_words_by_ref = "true" ]; then
+		_get_comp_words_by_ref -n =:, cur words cword prev
+	else
+		__perf_get_comp_words_by_ref -n =:, cur words cword prev
+	fi
+	__perf_main
+} &&
+
+complete -o bashdefault -o default -o nospace -F _perf perf 2>/dev/null \
+	|| complete -o default -o nospace -F _perf perf