Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 947 insertions, 0 deletions

diff --git a/tools/power/cpupower/po/fr.po b/tools/power/cpupower/po/fr.po
new file mode 100644
index 000000000..b6e505b34
--- /dev/null
+++ b/tools/power/cpupower/po/fr.po
@@ -0,0 +1,947 @@
+# French translations for cpufrequtils package
+# Copyright (C) 2004 THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the cpufrequtils package.
+# Ducrot Bruno <ducrot@poupinou.org>, 2004.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: cpufrequtils 0.1-pre2\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2011-03-08 17:03+0100\n"
+"PO-Revision-Date: 2004-11-17 15:53+1000\n"
+"Last-Translator: Bruno Ducrot <ducrot@poupinou.org>\n"
+"Language-Team: NONE\n"
+"Language: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-1\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: utils/idle_monitor/nhm_idle.c:36
+msgid "Processor Core C3"
+msgstr ""
+
+#: utils/idle_monitor/nhm_idle.c:43
+msgid "Processor Core C6"
+msgstr ""
+
+#: utils/idle_monitor/nhm_idle.c:51
+msgid "Processor Package C3"
+msgstr ""
+
+#: utils/idle_monitor/nhm_idle.c:58 utils/idle_monitor/amd_fam14h_idle.c:70
+msgid "Processor Package C6"
+msgstr ""
+
+#: utils/idle_monitor/snb_idle.c:33
+msgid "Processor Core C7"
+msgstr ""
+
+#: utils/idle_monitor/snb_idle.c:40
+msgid "Processor Package C2"
+msgstr ""
+
+#: utils/idle_monitor/snb_idle.c:47
+msgid "Processor Package C7"
+msgstr ""
+
+#: utils/idle_monitor/amd_fam14h_idle.c:56
+msgid "Package in sleep state (PC1 or deeper)"
+msgstr ""
+
+#: utils/idle_monitor/amd_fam14h_idle.c:63
+msgid "Processor Package C1"
+msgstr ""
+
+#: utils/idle_monitor/amd_fam14h_idle.c:77
+msgid "North Bridge P1 boolean counter (returns 0 or 1)"
+msgstr ""
+
+#: utils/idle_monitor/mperf_monitor.c:35
+msgid "Processor Core not idle"
+msgstr ""
+
+#: utils/idle_monitor/mperf_monitor.c:42
+msgid "Processor Core in an idle state"
+msgstr ""
+
+#: utils/idle_monitor/mperf_monitor.c:50
+msgid "Average Frequency (including boost) in MHz"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:66
+#, c-format
+msgid ""
+"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
+"interval_sec | -c command ...]\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:69
+#, c-format
+msgid ""
+"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
+"interval_sec | -c command ...]\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:71
+#, c-format
+msgid "\t -v: be more verbose\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:73
+#, c-format
+msgid "\t -h: print this help\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:74
+#, c-format
+msgid "\t -i: time interval to measure for in seconds (default 1)\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:75
+#, c-format
+msgid "\t -t: show CPU topology/hierarchy\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:76
+#, c-format
+msgid "\t -l: list available CPU sleep monitors (for use with -m)\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:77
+#, c-format
+msgid "\t -m: show specific CPU sleep monitors only (in same order)\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:79
+#, c-format
+msgid ""
+"only one of: -t, -l, -m are allowed\n"
+"If none of them is passed,"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:80
+#, c-format
+msgid " all supported monitors are shown\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:197
+#, c-format
+msgid "Monitor %s, Counter %s has no count function. Implementation error\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:207
+#, c-format
+msgid " *is offline\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:236
+#, c-format
+msgid "%s: max monitor name length (%d) exceeded\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:250
+#, c-format
+msgid "No matching monitor found in %s, try -l option\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:266
+#, c-format
+msgid "Monitor \"%s\" (%d states) - Might overflow after %u s\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:319
+#, c-format
+msgid "%s took %.5f seconds and exited with status %d\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:406
+#, c-format
+msgid "Cannot read number of available processors\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:417
+#, c-format
+msgid "Available monitor %s needs root access\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:428
+#, c-format
+msgid "No HW Cstate monitors found\n"
+msgstr ""
+
+#: utils/cpupower.c:78
+#, c-format
+msgid "cpupower [ -c cpulist ] subcommand [ARGS]\n"
+msgstr ""
+
+#: utils/cpupower.c:79
+#, c-format
+msgid "cpupower --version\n"
+msgstr ""
+
+#: utils/cpupower.c:80
+#, c-format
+msgid "Supported subcommands are:\n"
+msgstr ""
+
+#: utils/cpupower.c:83
+#, c-format
+msgid ""
+"\n"
+"Some subcommands can make use of the -c cpulist option.\n"
+msgstr ""
+
+#: utils/cpupower.c:84
+#, c-format
+msgid "Look at the general cpupower manpage how to use it\n"
+msgstr ""
+
+#: utils/cpupower.c:85
+#, c-format
+msgid "and read up the subcommand's manpage whether it is supported.\n"
+msgstr ""
+
+#: utils/cpupower.c:86
+#, c-format
+msgid ""
+"\n"
+"Use cpupower help subcommand for getting help for above subcommands.\n"
+msgstr ""
+
+#: utils/cpupower.c:91
+#, c-format
+msgid "Report errors and bugs to %s, please.\n"
+msgstr "Veuillez rapportez les erreurs et les bogues à %s, s'il vous plait.\n"
+
+#: utils/cpupower.c:114
+#, c-format
+msgid "Error parsing cpu list\n"
+msgstr ""
+
+#: utils/cpupower.c:172
+#, c-format
+msgid "Subcommand %s needs root privileges\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:31
+#, c-format
+msgid "Couldn't count the number of CPUs (%s: %s), assuming 1\n"
+msgstr "Détermination du nombre de CPUs (%s : %s) impossible.  Assume 1\n"
+
+#: utils/cpufreq-info.c:63
+#, c-format
+msgid ""
+"          minimum CPU frequency  -  maximum CPU frequency  -  governor\n"
+msgstr ""
+"         Fréquence CPU minimale - Fréquence CPU maximale  - régulateur\n"
+
+#: utils/cpufreq-info.c:151
+#, c-format
+msgid "Error while evaluating Boost Capabilities on CPU %d -- are you root?\n"
+msgstr ""
+
+#. P state changes via MSR are identified via cpuid 80000007
+#. on Intel and AMD, but we assume boost capable machines can do that
+#. if (cpuid_eax(0x80000000) >= 0x80000007
+#. && (cpuid_edx(0x80000007) & (1 << 7)))
+#.
+#: utils/cpufreq-info.c:161
+#, c-format
+msgid "  boost state support: \n"
+msgstr ""
+
+#: utils/cpufreq-info.c:163
+#, c-format
+msgid "    Supported: %s\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164
+msgid "yes"
+msgstr ""
+
+#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164
+msgid "no"
+msgstr ""
+
+#: utils/cpufreq-info.c:164
+#, fuzzy, c-format
+msgid "    Active: %s\n"
+msgstr "  pilote : %s\n"
+
+#: utils/cpufreq-info.c:177
+#, c-format
+msgid "    Boost States: %d\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:178
+#, c-format
+msgid "    Total States: %d\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:181
+#, c-format
+msgid "    Pstate-Pb%d: %luMHz (boost state)\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:184
+#, c-format
+msgid "    Pstate-P%d:  %luMHz\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:211
+#, c-format
+msgid "  no or unknown cpufreq driver is active on this CPU\n"
+msgstr "  pas de pilotes cpufreq reconnu pour ce CPU\n"
+
+#: utils/cpufreq-info.c:213
+#, c-format
+msgid "  driver: %s\n"
+msgstr "  pilote : %s\n"
+
+#: utils/cpufreq-info.c:219
+#, fuzzy, c-format
+msgid "  CPUs which run at the same hardware frequency: "
+msgstr "  CPUs qui doivent changer de fréquences en même temps : "
+
+#: utils/cpufreq-info.c:230
+#, fuzzy, c-format
+msgid "  CPUs which need to have their frequency coordinated by software: "
+msgstr "  CPUs qui doivent changer de fréquences en même temps : "
+
+#: utils/cpufreq-info.c:241
+#, c-format
+msgid "  maximum transition latency: "
+msgstr ""
+
+#: utils/cpufreq-info.c:247
+#, c-format
+msgid "  hardware limits: "
+msgstr "  limitation matérielle : "
+
+#: utils/cpufreq-info.c:256
+#, c-format
+msgid "  available frequency steps: "
+msgstr "  plage de fréquence : "
+
+#: utils/cpufreq-info.c:269
+#, c-format
+msgid "  available cpufreq governors: "
+msgstr "  régulateurs disponibles : "
+
+#: utils/cpufreq-info.c:280
+#, c-format
+msgid "  current policy: frequency should be within "
+msgstr "  tactique actuelle : la fréquence doit être comprise entre "
+
+#: utils/cpufreq-info.c:282
+#, c-format
+msgid " and "
+msgstr " et "
+
+#: utils/cpufreq-info.c:286
+#, c-format
+msgid ""
+"The governor \"%s\" may decide which speed to use\n"
+"                  within this range.\n"
+msgstr ""
+"Le régulateur \"%s\" est libre de choisir la vitesse\n"
+"                  dans cette plage de fréquences.\n"
+
+#: utils/cpufreq-info.c:293
+#, c-format
+msgid "  current CPU frequency is "
+msgstr "  la fréquence actuelle de ce CPU est "
+
+#: utils/cpufreq-info.c:296
+#, c-format
+msgid " (asserted by call to hardware)"
+msgstr " (vérifié par un appel direct du matériel)"
+
+#: utils/cpufreq-info.c:304
+#, c-format
+msgid "  cpufreq stats: "
+msgstr "  des statistique concernant cpufreq:"
+
+#: utils/cpufreq-info.c:472
+#, fuzzy, c-format
+msgid "Usage: cpupower freqinfo [options]\n"
+msgstr "Usage : cpufreq-info [options]\n"
+
+#: utils/cpufreq-info.c:473 utils/cpufreq-set.c:26 utils/cpupower-set.c:23
+#: utils/cpupower-info.c:22 utils/cpuidle-info.c:148
+#, c-format
+msgid "Options:\n"
+msgstr "Options :\n"
+
+#: utils/cpufreq-info.c:474
+#, fuzzy, c-format
+msgid "  -e, --debug          Prints out debug information [default]\n"
+msgstr "  -e, --debug          Afficher les informations de déboguage\n"
+
+#: utils/cpufreq-info.c:475
+#, c-format
+msgid ""
+"  -f, --freq           Get frequency the CPU currently runs at, according\n"
+"                       to the cpufreq core *\n"
+msgstr ""
+"  -f, --freq           Obtenir la fréquence actuelle du CPU selon le point\n"
+"                       de vue du coeur du système de cpufreq *\n"
+
+#: utils/cpufreq-info.c:477
+#, c-format
+msgid ""
+"  -w, --hwfreq         Get frequency the CPU currently runs at, by reading\n"
+"                       it from hardware (only available to root) *\n"
+msgstr ""
+"  -w, --hwfreq         Obtenir la fréquence actuelle du CPU directement par\n"
+"                       le matériel (doit être root) *\n"
+
+#: utils/cpufreq-info.c:479
+#, c-format
+msgid ""
+"  -l, --hwlimits       Determine the minimum and maximum CPU frequency "
+"allowed *\n"
+msgstr ""
+"  -l, --hwlimits       Affiche les fréquences minimales et maximales du CPU "
+"*\n"
+
+#: utils/cpufreq-info.c:480
+#, c-format
+msgid "  -d, --driver         Determines the used cpufreq kernel driver *\n"
+msgstr "  -d, --driver         Affiche le pilote cpufreq utilisé *\n"
+
+#: utils/cpufreq-info.c:481
+#, c-format
+msgid "  -p, --policy         Gets the currently used cpufreq policy *\n"
+msgstr "  -p, --policy         Affiche la tactique actuelle de cpufreq *\n"
+
+#: utils/cpufreq-info.c:482
+#, c-format
+msgid "  -g, --governors      Determines available cpufreq governors *\n"
+msgstr ""
+"  -g, --governors      Affiche les régulateurs disponibles de cpufreq *\n"
+
+#: utils/cpufreq-info.c:483
+#, fuzzy, c-format
+msgid ""
+"  -r, --related-cpus   Determines which CPUs run at the same hardware "
+"frequency *\n"
+msgstr ""
+"  -a, --affected-cpus   Affiche quels sont les CPUs qui doivent changer de\n"
+"                        fréquences en même temps *\n"
+
+#: utils/cpufreq-info.c:484
+#, fuzzy, c-format
+msgid ""
+"  -a, --affected-cpus  Determines which CPUs need to have their frequency\n"
+"                       coordinated by software *\n"
+msgstr ""
+"  -a, --affected-cpus   Affiche quels sont les CPUs qui doivent changer de\n"
+"                        fréquences en même temps *\n"
+
+#: utils/cpufreq-info.c:486
+#, c-format
+msgid "  -s, --stats          Shows cpufreq statistics if available\n"
+msgstr ""
+"  -s, --stats          Indique des statistiques concernant cpufreq, si\n"
+"                       disponibles\n"
+
+#: utils/cpufreq-info.c:487
+#, fuzzy, c-format
+msgid ""
+"  -y, --latency        Determines the maximum latency on CPU frequency "
+"changes *\n"
+msgstr ""
+"  -l, --hwlimits       Affiche les fréquences minimales et maximales du CPU "
+"*\n"
+
+#: utils/cpufreq-info.c:488
+#, c-format
+msgid "  -b, --boost          Checks for turbo or boost modes  *\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:489
+#, c-format
+msgid ""
+"  -o, --proc           Prints out information like provided by the /proc/"
+"cpufreq\n"
+"                       interface in 2.4. and early 2.6. kernels\n"
+msgstr ""
+"  -o, --proc           Affiche les informations en utilisant l'interface\n"
+"                       fournie par /proc/cpufreq, présente dans les "
+"versions\n"
+"                       2.4 et les anciennes versions 2.6 du noyau\n"
+
+#: utils/cpufreq-info.c:491
+#, fuzzy, c-format
+msgid ""
+"  -m, --human          human-readable output for the -f, -w, -s and -y "
+"parameters\n"
+msgstr ""
+"  -m, --human           affiche dans un format lisible pour un humain\n"
+"                        pour les options -f, -w et -s (MHz, GHz)\n"
+
+#: utils/cpufreq-info.c:492 utils/cpuidle-info.c:152
+#, c-format
+msgid "  -h, --help           Prints out this screen\n"
+msgstr "  -h, --help           affiche l'aide-mémoire\n"
+
+#: utils/cpufreq-info.c:495
+#, c-format
+msgid ""
+"If no argument or only the -c, --cpu parameter is given, debug output about\n"
+"cpufreq is printed which is useful e.g. for reporting bugs.\n"
+msgstr ""
+"Par défaut, les informations de déboguage seront affichées si aucun\n"
+"argument, ou bien si seulement l'argument -c (--cpu) est donné, afin de\n"
+"faciliter les rapports de bogues par exemple\n"
+
+#: utils/cpufreq-info.c:497
+#, c-format
+msgid ""
+"For the arguments marked with *, omitting the -c or --cpu argument is\n"
+"equivalent to setting it to zero\n"
+msgstr "Les arguments avec un * utiliseront le CPU 0 si -c (--cpu) est omis\n"
+
+#: utils/cpufreq-info.c:580
+#, c-format
+msgid ""
+"The argument passed to this tool can't be combined with passing a --cpu "
+"argument\n"
+msgstr "Cette option est incompatible avec --cpu\n"
+
+#: utils/cpufreq-info.c:596
+#, c-format
+msgid ""
+"You can't specify more than one --cpu parameter and/or\n"
+"more than one output-specific argument\n"
+msgstr ""
+"On ne peut indiquer plus d'un paramètre --cpu, tout comme l'on ne peut\n"
+"spécifier plus d'un argument de formatage\n"
+
+#: utils/cpufreq-info.c:600 utils/cpufreq-set.c:82 utils/cpupower-set.c:42
+#: utils/cpupower-info.c:42 utils/cpuidle-info.c:213
+#, c-format
+msgid "invalid or unknown argument\n"
+msgstr "option invalide\n"
+
+#: utils/cpufreq-info.c:617
+#, c-format
+msgid "couldn't analyze CPU %d as it doesn't seem to be present\n"
+msgstr "analyse du CPU %d impossible puisqu'il ne semble pas être présent\n"
+
+#: utils/cpufreq-info.c:620 utils/cpupower-info.c:142
+#, c-format
+msgid "analyzing CPU %d:\n"
+msgstr "analyse du CPU %d :\n"
+
+#: utils/cpufreq-set.c:25
+#, fuzzy, c-format
+msgid "Usage: cpupower frequency-set [options]\n"
+msgstr "Usage : cpufreq-set [options]\n"
+
+#: utils/cpufreq-set.c:27
+#, c-format
+msgid ""
+"  -d FREQ, --min FREQ      new minimum CPU frequency the governor may "
+"select\n"
+msgstr ""
+"  -d FREQ, --min FREQ       nouvelle fréquence minimale du CPU à utiliser\n"
+"                            par le régulateur\n"
+
+#: utils/cpufreq-set.c:28
+#, c-format
+msgid ""
+"  -u FREQ, --max FREQ      new maximum CPU frequency the governor may "
+"select\n"
+msgstr ""
+"  -u FREQ, --max FREQ       nouvelle fréquence maximale du CPU à utiliser\n"
+"                            par le régulateur\n"
+
+#: utils/cpufreq-set.c:29
+#, c-format
+msgid "  -g GOV, --governor GOV   new cpufreq governor\n"
+msgstr "  -g GOV, --governor GOV   active le régulateur GOV\n"
+
+#: utils/cpufreq-set.c:30
+#, c-format
+msgid ""
+"  -f FREQ, --freq FREQ     specific frequency to be set. Requires userspace\n"
+"                           governor to be available and loaded\n"
+msgstr ""
+"  -f FREQ, --freq FREQ     fixe la fréquence du processeur à FREQ. Il faut\n"
+"                           que le régulateur « userspace » soit disponible \n"
+"                           et activé.\n"
+
+#: utils/cpufreq-set.c:32
+#, c-format
+msgid "  -r, --related            Switches all hardware-related CPUs\n"
+msgstr ""
+
+#: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27
+#, fuzzy, c-format
+msgid "  -h, --help               Prints out this screen\n"
+msgstr "  -h, --help           affiche l'aide-mémoire\n"
+
+#: utils/cpufreq-set.c:35
+#, fuzzy, c-format
+msgid ""
+"Notes:\n"
+"1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n"
+msgstr "Les arguments avec un * utiliseront le CPU 0 si -c (--cpu) est omis\n"
+
+#: utils/cpufreq-set.c:37
+#, fuzzy, c-format
+msgid ""
+"2. The -f FREQ, --freq FREQ parameter cannot be combined with any other "
+"parameter\n"
+"   except the -c CPU, --cpu CPU parameter\n"
+"3. FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz\n"
+"   by postfixing the value with the wanted unit name, without any space\n"
+"   (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n"
+msgstr ""
+"Remarque :\n"
+"1. Le CPU numéro 0 sera utilisé par défaut si -c (ou --cpu) est omis ;\n"
+"2. l'argument -f FREQ (ou --freq FREQ) ne peut être utilisé qu'avec --cpu ;\n"
+"3. on pourra préciser l'unité des fréquences en postfixant sans aucune "
+"espace\n"
+"   les valeurs par hz, kHz (par défaut), MHz, GHz ou THz\n"
+"   (kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n"
+
+#: utils/cpufreq-set.c:57
+#, c-format
+msgid ""
+"Error setting new values. Common errors:\n"
+"- Do you have proper administration rights? (super-user?)\n"
+"- Is the governor you requested available and modprobed?\n"
+"- Trying to set an invalid policy?\n"
+"- Trying to set a specific frequency, but userspace governor is not "
+"available,\n"
+"   for example because of hardware which cannot be set to a specific "
+"frequency\n"
+"   or because the userspace governor isn't loaded?\n"
+msgstr ""
+"En ajustant les nouveaux paramètres, une erreur est apparue. Les sources\n"
+"d'erreur typique sont :\n"
+"- droit d'administration insuffisant (êtes-vous root ?) ;\n"
+"- le régulateur choisi n'est pas disponible, ou bien n'est pas disponible "
+"en\n"
+"  tant que module noyau ;\n"
+"- la tactique n'est pas disponible ;\n"
+"- vous voulez utiliser l'option -f/--freq, mais le régulateur « userspace »\n"
+"  n'est pas disponible, par exemple parce que le matériel ne le supporte\n"
+"  pas, ou bien n'est tout simplement pas chargé.\n"
+
+#: utils/cpufreq-set.c:170
+#, c-format
+msgid "wrong, unknown or unhandled CPU?\n"
+msgstr "CPU inconnu ou non supporté ?\n"
+
+#: utils/cpufreq-set.c:302
+#, c-format
+msgid ""
+"the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n"
+"-g/--governor parameters\n"
+msgstr ""
+"l'option -f/--freq est incompatible avec les options -d/--min, -u/--max et\n"
+"-g/--governor\n"
+
+#: utils/cpufreq-set.c:308
+#, c-format
+msgid ""
+"At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n"
+"-g/--governor must be passed\n"
+msgstr ""
+"L'un de ces paramètres est obligatoire : -f/--freq, -d/--min, -u/--max et\n"
+"-g/--governor\n"
+
+#: utils/cpufreq-set.c:347
+#, c-format
+msgid "Setting cpu: %d\n"
+msgstr ""
+
+#: utils/cpupower-set.c:22
+#, c-format
+msgid "Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n"
+msgstr ""
+
+#: utils/cpupower-set.c:24
+#, c-format
+msgid ""
+"  -b, --perf-bias [VAL]    Sets CPU's power vs performance policy on some\n"
+"                           Intel models [0-15], see manpage for details\n"
+msgstr ""
+
+#: utils/cpupower-set.c:26
+#, c-format
+msgid ""
+"  -m, --sched-mc  [VAL]    Sets the kernel's multi core scheduler policy.\n"
+msgstr ""
+
+#: utils/cpupower-set.c:27
+#, c-format
+msgid ""
+"  -s, --sched-smt [VAL]    Sets the kernel's thread sibling scheduler "
+"policy.\n"
+msgstr ""
+
+#: utils/cpupower-set.c:80
+#, c-format
+msgid "--perf-bias param out of range [0-%d]\n"
+msgstr ""
+
+#: utils/cpupower-set.c:91
+#, c-format
+msgid "--sched-mc param out of range [0-%d]\n"
+msgstr ""
+
+#: utils/cpupower-set.c:102
+#, c-format
+msgid "--sched-smt param out of range [0-%d]\n"
+msgstr ""
+
+#: utils/cpupower-set.c:121
+#, c-format
+msgid "Error setting sched-mc %s\n"
+msgstr ""
+
+#: utils/cpupower-set.c:127
+#, c-format
+msgid "Error setting sched-smt %s\n"
+msgstr ""
+
+#: utils/cpupower-set.c:146
+#, c-format
+msgid "Error setting perf-bias value on CPU %d\n"
+msgstr ""
+
+#: utils/cpupower-info.c:21
+#, c-format
+msgid "Usage: cpupower info [ -b ] [ -m ] [ -s ]\n"
+msgstr ""
+
+#: utils/cpupower-info.c:23
+#, c-format
+msgid ""
+"  -b, --perf-bias    Gets CPU's power vs performance policy on some\n"
+"                           Intel models [0-15], see manpage for details\n"
+msgstr ""
+
+#: utils/cpupower-info.c:25
+#, fuzzy, c-format
+msgid "  -m, --sched-mc     Gets the kernel's multi core scheduler policy.\n"
+msgstr "  -p, --policy         Affiche la tactique actuelle de cpufreq *\n"
+
+#: utils/cpupower-info.c:26
+#, c-format
+msgid ""
+"  -s, --sched-smt    Gets the kernel's thread sibling scheduler policy.\n"
+msgstr ""
+
+#: utils/cpupower-info.c:28
+#, c-format
+msgid ""
+"\n"
+"Passing no option will show all info, by default only on core 0\n"
+msgstr ""
+
+#: utils/cpupower-info.c:102
+#, c-format
+msgid "System's multi core scheduler setting: "
+msgstr ""
+
+#. if sysfs file is missing it's: errno == ENOENT
+#: utils/cpupower-info.c:105 utils/cpupower-info.c:114
+#, c-format
+msgid "not supported\n"
+msgstr ""
+
+#: utils/cpupower-info.c:111
+#, c-format
+msgid "System's thread sibling scheduler setting: "
+msgstr ""
+
+#: utils/cpupower-info.c:126
+#, c-format
+msgid "Intel's performance bias setting needs root privileges\n"
+msgstr ""
+
+#: utils/cpupower-info.c:128
+#, c-format
+msgid "System does not support Intel's performance bias setting\n"
+msgstr ""
+
+#: utils/cpupower-info.c:147
+#, c-format
+msgid "Could not read perf-bias value\n"
+msgstr ""
+
+#: utils/cpupower-info.c:150
+#, c-format
+msgid "perf-bias: %d\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:28
+#, fuzzy, c-format
+msgid "Analyzing CPU %d:\n"
+msgstr "analyse du CPU %d :\n"
+
+#: utils/cpuidle-info.c:32
+#, c-format
+msgid "CPU %u: No idle states\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:36
+#, c-format
+msgid "CPU %u: Can't read idle state info\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:41
+#, c-format
+msgid "Could not determine max idle state %u\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:46
+#, c-format
+msgid "Number of idle states: %d\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:48
+#, fuzzy, c-format
+msgid "Available idle states:"
+msgstr "  plage de fréquence : "
+
+#: utils/cpuidle-info.c:71
+#, c-format
+msgid "Flags/Description: %s\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:74
+#, c-format
+msgid "Latency: %lu\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:76
+#, c-format
+msgid "Usage: %lu\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:78
+#, c-format
+msgid "Duration: %llu\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:90
+#, c-format
+msgid "Could not determine cpuidle driver\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:94
+#, fuzzy, c-format
+msgid "CPUidle driver: %s\n"
+msgstr "  pilote : %s\n"
+
+#: utils/cpuidle-info.c:99
+#, c-format
+msgid "Could not determine cpuidle governor\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:103
+#, c-format
+msgid "CPUidle governor: %s\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:122
+#, c-format
+msgid "CPU %u: Can't read C-state info\n"
+msgstr ""
+
+#. printf("Cstates: %d\n", cstates);
+#: utils/cpuidle-info.c:127
+#, c-format
+msgid "active state:            C0\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:128
+#, c-format
+msgid "max_cstate:              C%u\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:129
+#, c-format
+msgid "maximum allowed latency: %lu usec\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:130
+#, c-format
+msgid "states:\t\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:132
+#, c-format
+msgid "    C%d:                  type[C%d] "
+msgstr ""
+
+#: utils/cpuidle-info.c:134
+#, c-format
+msgid "promotion[--] demotion[--] "
+msgstr ""
+
+#: utils/cpuidle-info.c:135
+#, c-format
+msgid "latency[%03lu] "
+msgstr ""
+
+#: utils/cpuidle-info.c:137
+#, c-format
+msgid "usage[%08lu] "
+msgstr ""
+
+#: utils/cpuidle-info.c:139
+#, c-format
+msgid "duration[%020Lu] \n"
+msgstr ""
+
+#: utils/cpuidle-info.c:147
+#, fuzzy, c-format
+msgid "Usage: cpupower idleinfo [options]\n"
+msgstr "Usage : cpufreq-info [options]\n"
+
+#: utils/cpuidle-info.c:149
+#, fuzzy, c-format
+msgid "  -s, --silent         Only show general C-state information\n"
+msgstr "  -e, --debug          Afficher les informations de déboguage\n"
+
+#: utils/cpuidle-info.c:150
+#, fuzzy, c-format
+msgid ""
+"  -o, --proc           Prints out information like provided by the /proc/"
+"acpi/processor/*/power\n"
+"                       interface in older kernels\n"
+msgstr ""
+"  -o, --proc           Affiche les informations en utilisant l'interface\n"
+"                       fournie par /proc/cpufreq, présente dans les "
+"versions\n"
+"                       2.4 et les anciennes versions 2.6 du noyau\n"
+
+#: utils/cpuidle-info.c:209
+#, fuzzy, c-format
+msgid "You can't specify more than one output-specific argument\n"
+msgstr ""
+"On ne peut indiquer plus d'un paramètre --cpu, tout comme l'on ne peut\n"
+"spécifier plus d'un argument de formatage\n"
+
+#~ msgid ""
+#~ "  -c CPU, --cpu CPU    CPU number which information shall be determined "
+#~ "about\n"
+#~ msgstr ""
+#~ "  -c CPU, --cpu CPU    Numéro du CPU pour lequel l'information sera "
+#~ "affichée\n"
+
+#~ msgid ""
+#~ "  -c CPU, --cpu CPU        number of CPU where cpufreq settings shall be "
+#~ "modified\n"
+#~ msgstr ""
+#~ "  -c CPU, --cpu CPU        numéro du CPU à prendre en compte pour les\n"
+#~ "                           changements\n"