Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

13 files changed, 1367 insertions, 0 deletions

diff --git a/tools/power/pm-graph/config/cgskip.txt b/tools/power/pm-graph/config/cgskip.txt
new file mode 100644
index 000000000..9ff88e7e2
--- /dev/null
+++ b/tools/power/pm-graph/config/cgskip.txt
@@ -0,0 +1,66 @@
+# -----------------------------------------------
+# CallGraph function skip list
+#
+# This file contains a list of functions which are
+# meant to be skipped in the callgraph trace. It reduces
+# the callgraph html file size by treating these functions
+# as leaves with no child calls. It can be editted by
+# adding or removing function symbol names.
+#
+# The sleepgraph tool automatically pulls this file in when
+# it is found in the config folder. It can be ignored if
+# the tool is called with "-cgskip off".
+# -----------------------------------------------
+
+# low level scheduling and timing
+up
+down_timeout
+mutex_lock
+down_read
+complete_all
+schedule_timeout
+wake_up_process
+msleep
+__udelay
+ktime_get
+
+# console calls
+printk
+dev_printk
+__dev_printk
+console_unlock
+
+# memory handling
+__kmalloc
+__kmalloc_track_caller
+kmem_cache_alloc
+kmem_cache_alloc_trace
+kmem_cache_free
+kstrdup
+kstrdup_const
+kmalloc_slab
+new_slab
+__slab_alloc
+__slab_free
+raw_pci_read
+pci_read
+alloc_pages_current
+
+# debugfs and sysfs setup
+debugfs_remove_recursive
+debugfs_create_dir
+debugfs_create_files
+debugfs_create_dir
+debugfs_get_inode
+sysfs_add_file_mode_ns
+sysfs_add_file
+sysfs_create_dir_ns
+sysfs_create_link
+sysfs_create_group
+sysfs_create_groups
+sysfs_create_bin_file
+dpm_sysfs_add
+sysfs_create_file_ns
+sysfs_merge_group
+sysfs_add_link_to_group
+sysfs_create_link_sd
diff --git a/tools/power/pm-graph/config/custom-timeline-functions.cfg b/tools/power/pm-graph/config/custom-timeline-functions.cfg
new file mode 100644
index 000000000..4f80ad7d7
--- /dev/null
+++ b/tools/power/pm-graph/config/custom-timeline-functions.cfg
@@ -0,0 +1,205 @@
+#
+# This is the configuration file for sleepgraph. It contains
+# all the tool arguments so that they don't have to be given on the
+# command line. It also includes advanced settings for functions
+# and kprobes. It is run like this
+#
+#    sudo ./sleepgraph.py -config thisfile.txt
+#
+
+[Settings]
+
+# Verbosity
+# print verbose messages (default: false)
+verbose: false
+
+# Suspend Mode
+# e.g. standby, mem, freeze, disk (default: mem)
+mode: mem
+
+# Automatic Wakeup
+# Use rtcwake to autoresume after X seconds, or off to disable (default: 15)
+rtcwake: 15
+
+# Add Logs
+# add the dmesg and ftrace log to the html output (default: false)
+addlogs: false
+
+# Display function calls
+# graph source functions in the timeline (default: false)
+dev: true
+
+# Callgraph
+# gather detailed ftrace callgraph data on all timeline events (default: false)
+callgraph: false
+
+# Back to Back Suspend/Resume
+# Run two suspend/resumes back to back (default: false)
+x2: false
+
+# Back to Back Suspend Delay
+# Time delay between the two test runs in ms (default: 0 ms)
+x2delay: 0
+
+# Minimum Device Length
+# graph only devices longer than min in the timeline (default: 0.001 ms)
+mindev: 1
+
+# Minimum Callgraph Length
+# provide callgraph data for blocks longer than min (default: 0.001 ms)
+mincg: 1
+
+# Suspend/Resume Gap
+# insert a small visible gap between suspend and resume on the timeline (default: false)
+srgap: false
+
+# Output Directory Format
+# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values
+output-dir: suspend-{hostname}-{date}-{time}-custom
+
+# Override default timeline entries
+# Do not use the internal default functions for timeline entries (default: false)
+# Set this to true if you intend to only use the ones defined in this config
+override-timeline-functions: true
+
+# Override default dev timeline entries
+# Do not use the internal default functions for dev timeline entries (default: false)
+# Set this to true if you intend to only use the ones defined in this config
+override-dev-timeline-functions: true
+
+[timeline_functions_x86_64]
+#
+# Function calls to display in the timeline alongside device callbacks.
+# The tool has an internal set of these functions which should cover the
+# whole of kernel execution, but you can append or override here.
+#
+# This is a list of kprobes which use both symbol data and function arg data.
+# The function calls are displayed on the timeline alongside the device blocks.
+# The args are pulled directly from the stack using this architecture's registers
+# and stack formatting. Three pieces of info are required. The function name,
+# a format string, and an argument list
+#
+# Entry format:
+#
+#   function: format{fn_arg1}_{fn_arg2} fn_arg1 fn_arg2 ... [color=purple]
+#
+# Required Arguments:
+#
+#   function: The symbol name for the function you want probed, this is the
+#             minimum required for an entry, it will show up as the function
+#             name with no arguments.
+#
+#       example: _cpu_up:
+#
+# Optional Arguments:
+#
+#   format: The format to display the data on the timeline in. Use braces to
+#           enclose the arg names.
+#
+#       example: CPU_ON[{cpu}]
+#
+#   color: The color of the entry block in the timeline. The default color is
+#          transparent, so the entry shares the phase color. The color is an
+#          html color string, either a word, or an RGB.
+#
+#       example: [color=#CC00CC]
+#
+#   arglist: A list of arguments from registers/stack addresses. See URL:
+#            https://www.kernel.org/doc/Documentation/trace/kprobetrace.txt
+#
+#       example: cpu=%di:s32
+#
+# Example: Display cpu resume in the timeline
+#
+#       _cpu_up: CPU_ON[{cpu}] cpu=%di:s32 [color=orange]
+#
+_cpu_down: CPU_OFF[{cpu}] cpu=%di:s32
+_cpu_up: CPU_ON[{cpu}] cpu=%di:s32
+sys_sync:
+pm_prepare_console:
+pm_notifier_call_chain:
+freeze_processes:
+freeze_kernel_threads:
+pm_restrict_gfp_mask:
+acpi_suspend_begin:
+suspend_console:
+acpi_pm_prepare:
+syscore_suspend:
+arch_enable_nonboot_cpus_end:
+syscore_resume:
+acpi_pm_finish:
+resume_console:
+acpi_pm_end:
+pm_restore_gfp_mask:
+thaw_processes:
+pm_restore_console:
+
+[dev_timeline_functions_x86_64]
+#
+# Dev mode function calls to display inside timeline entries
+#
+# This is a list of kprobes which use both symbol data and function arg data.
+# The function calls are displayed on the timeline alongside the device blocks.
+# The args are pulled directly from the stack using this architecture's registers
+# and stack formatting. Three pieces of info are required. The function name,
+# a format string, and an argument list
+#
+# Entry format:
+#
+#   function: format{fn_arg1}_{fn_arg2} fn_arg1 fn_arg2 ... [color=purple]
+#
+# Required Arguments:
+#
+#   function: The symbol name for the function you want probed, this is the
+#             minimum required for an entry, it will show up as the function
+#             name with no arguments.
+#
+#       example: ata_eh_recover:
+#
+# Optional Arguments:
+#
+#   format: The format to display the data on the timeline in. Use braces to
+#           enclose the arg names.
+#
+#       example: ata{port}_port_reset
+# 
+#   color: The color of the entry block in the timeline. The default color is
+#          transparent, so the entry shares the phase color. The color is an
+#          html color string, either a word, or an RGB.
+#
+#       example: [color=#CC00CC]
+#
+#   arglist: A list of arguments from registers/stack addresses. See URL:
+#            https://www.kernel.org/doc/Documentation/trace/kprobetrace.txt
+#
+#       example: port=+36(%di):s32
+#
+# Example: Display ATA port reset as ataN_port_reset in the timeline
+#
+#       ata_eh_recover: ata{port}_port_reset port=+36(%di):s32
+#
+msleep: msleep time=%di:s32
+schedule_timeout_uninterruptible: schedule_timeout_uninterruptible timeout=%di:s32
+schedule_timeout: schedule_timeout timeout=%di:s32
+usleep_range: usleep_range min=%di:s32 max=%si:s32
+__const_udelay: udelay loops=%di:s32
+__mutex_lock_slowpath: mutex_lock_slowpath
+ata_eh_recover: ata_eh_recover port=+36(%di):s32
+acpi_os_stall:
+acpi_resume_power_resources:
+acpi_ps_parse_aml:
+ext4_sync_fs:
+i915_gem_resume:
+i915_restore_state:
+intel_opregion_setup:
+g4x_pre_enable_dp:
+vlv_pre_enable_dp:
+chv_pre_enable_dp:
+g4x_enable_dp:
+vlv_enable_dp:
+intel_hpd_init:
+intel_opregion_register:
+intel_dp_detect:
+intel_hdmi_detect:
+intel_opregion_init:
+intel_fbdev_set_suspend:
diff --git a/tools/power/pm-graph/config/example.cfg b/tools/power/pm-graph/config/example.cfg
new file mode 100644
index 000000000..1ef3eb938
--- /dev/null
+++ b/tools/power/pm-graph/config/example.cfg
@@ -0,0 +1,159 @@
+#
+# Generic S3 (Suspend to Mem) test
+#
+# This is the configuration file for sleepgraph. It contains
+# all the tool arguments so that they don't have to be given on the
+# command line. It also includes advanced settings for functions
+# and kprobes. It is run like this
+#
+#    sudo ./sleepgraph.py -config config/example.cfg
+#
+
+[Settings]
+
+# ---- General Options ----
+
+# Verbosity
+# print verbose messages (default: false)
+verbose: false
+
+# Suspend Mode
+# e.g. standby, mem, freeze, disk (default: mem)
+mode: mem
+
+# Output Directory Format
+# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values
+output-dir: suspend-{hostname}-{date}-{time}
+
+# Automatic Wakeup
+# Use rtcwake to autoresume after X seconds, or off to disable (default: 15)
+rtcwake: 15
+
+# Add Logs
+# add the dmesg and ftrace log to the html output (default: false)
+addlogs: true
+
+# Suspend/Resume Gap
+# insert a small visible gap between suspend and resume on the timeline (default: false)
+srgap: false
+
+# Skip HTML generation
+# Only capture the logs, don't generate the html timeline (default: false)
+skiphtml: false
+
+# Sync filesystem before suspend
+# run sync before the test, minimizes sys_sync call time (default: false)
+sync: true
+
+# Runtime suspend enable/disable
+# Enable/disable runtime suspend for all devices, restore all after test (default: no-action)
+# rs: disable
+
+# Turn display on/off for test
+# Switch the display on/off for the test using xset (default: no-action)
+# display: on
+
+# Print results to text file
+# Print the status of the test run in the given file (default: no-action)
+result: result.txt
+
+# Gzip the log files to save space
+# Gzip the generated log files, and read gzipped log files (default: false)
+gzip: true
+
+# ---- Advanced Options ----
+
+# Command to execute in lieu of suspend (default: "")
+# command: echo mem > /sys/power/state
+
+# Display user processes
+# graph user processes and cpu usage in the timeline (default: false)
+proc: false
+
+# Display function calls
+# graph source functions in the timeline (default: false)
+dev: false
+
+# Multiple test runs
+# Run N tests D seconds apart, generates separate outputs with a summary (default: false)
+# multi: 3 5
+
+# Back to Back Suspend/Resume
+# Run two suspend/resumes back to back and display in the same timeline (default: false)
+x2: false
+
+# Back to Back Suspend Delay
+# Time delay between the two test runs in ms (default: 0 ms)
+x2delay: 0
+
+# Pre Suspend Delay
+# Include an N ms delay before (1st) suspend (default: 0 ms)
+predelay: 0
+
+# Post Resume Delay
+# Include an N ms delay after (last) resume (default: 0 ms)
+postdelay: 0
+
+# Minimum Device Length
+# graph only devices longer than min in the timeline (default: 0.001 ms)
+mindev: 0.001
+
+# Call Loop Max Gap (dev mode only)
+# merge loops of the same call if each is less than maxgap apart (def: 100us)
+callloop-maxgap: 0.0001
+
+# Call Loop Max Length (dev mode only)
+# merge loops of the same call if each is less than maxlen in length (def: 5ms)
+callloop-maxlen: 0.005
+
+# Override default timeline entries:
+# Do not use the internal default functions for timeline entries (def: false)
+# Set this to true if you intend to only use the ones defined in the config
+override-timeline-functions: true
+
+# Override default dev timeline entries:
+# Do not use the internal default functions for dev timeline entries (def: false)
+# Set this to true if you intend to only use the ones defined in the config
+override-dev-timeline-functions: true
+
+# ---- Debug Options ----
+
+# Callgraph
+# gather detailed ftrace callgraph data on all timeline events (default: false)
+callgraph: false
+
+# Max graph depth
+# limit the callgraph trace to this depth (default: 0 = all)
+maxdepth: 2
+
+# Callgraph phase filter
+# Only enable callgraphs for one phase, i.e. resume_noirq (default: all)
+cgphase: suspend
+
+# Callgraph x2 test filter
+# Only enable callgraphs test 0 or 1 when using -x2 (default: 1)
+cgtest: 0
+
+# Expand Callgraph
+# pre-expand the callgraph data in the html output (default: disabled)
+expandcg: false
+
+# Minimum Callgraph Length
+# provide callgraph data for blocks longer than min (default: 0.001 ms)
+mincg: 1
+
+# Timestamp Precision
+# Number of significant digits in timestamps (0:S, [3:ms], 6:us)
+timeprec: 6
+
+# Device Filter
+# show only devices whose name/driver includes one of these strings
+# devicefilter: _cpu_up,_cpu_down,i915,usb
+
+# Add kprobe functions to the timeline
+# Add functions to the timeline from a text file (default: no-action)
+# fadd: file.txt
+
+# Ftrace buffer size
+# Set trace buffer size to N kilo-bytes (default: all of free memory up to 3GB)
+# bufsize: 1000
diff --git a/tools/power/pm-graph/config/freeze-callgraph.cfg b/tools/power/pm-graph/config/freeze-callgraph.cfg
new file mode 100644
index 000000000..f692821c4
--- /dev/null
+++ b/tools/power/pm-graph/config/freeze-callgraph.cfg
@@ -0,0 +1,94 @@
+#
+# Full Callgraph for S2 (Freeze) test
+#
+# This is the configuration file for sleepgraph. It contains
+# all the tool arguments so that they don't have to be given on the
+# command line. It also includes advanced settings for functions
+# and kprobes. It is run like this
+#
+#    sudo ./sleepgraph.py -config config/freeze-callgraph.cfg
+#
+# NOTE: the output of this test is very large (> 30MB)
+
+[Settings]
+
+# ---- General Options ----
+
+# Verbosity
+# print verbose messages (default: false)
+verbose: false
+
+# Suspend Mode
+# e.g. standby, mem, freeze, disk (default: mem)
+mode: freeze
+
+# Output Directory Format
+# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values
+output-dir: freeze-{hostname}-{date}-{time}-cg
+
+# Automatic Wakeup
+# Use rtcwake to autoresume after X seconds, or off to disable (default: 15)
+rtcwake: 15
+
+# Add Logs
+# add the dmesg and ftrace log to the html output (default: false)
+addlogs: false
+
+# Suspend/Resume Gap
+# insert a small visible gap between suspend and resume on the timeline (default: false)
+srgap: false
+
+# ---- Advanced Options ----
+
+# Command to execute in lieu of freeze (default: "")
+# command: echo freeze > /sys/power/state
+
+# Display user processes
+# graph user processes and cpu usage in the timeline (default: false)
+proc: false
+
+# Display function calls
+# graph source functions in the timeline (default: false)
+dev: false
+
+# Back to Back Suspend/Resume
+# Run two suspend/resumes back to back (default: false)
+x2: false
+
+# Back to Back Suspend Delay
+# Time delay between the two test runs in ms (default: 0 ms)
+x2delay: 0
+
+# Pre Suspend Delay
+# Include an N ms delay before (1st) suspend (default: 0 ms)
+predelay: 0
+
+# Post Resume Delay
+# Include an N ms delay after (last) resume (default: 0 ms)
+postdelay: 0
+
+# Minimum Device Length
+# graph only devices longer than min in the timeline (default: 0.001 ms)
+mindev: 1
+
+# ---- Debug Options ----
+
+# Callgraph
+# gather detailed ftrace callgraph data on all timeline events (default: false)
+callgraph: true
+
+# Expand Callgraph
+# pre-expand the callgraph data in the html output (default: disabled)
+expandcg: false
+
+# Minimum Callgraph Length
+# provide callgraph data for blocks longer than min (default: 0.001 ms)
+mincg: 1
+
+# Timestamp Precision
+# Number of significant digits in timestamps (0:S, [3:ms], 6:us)
+timeprec: 6
+
+# Device Filter
+# show only devs whose name/driver includes one of these strings
+# devicefilter: _cpu_up,_cpu_down,i915,usb
diff --git a/tools/power/pm-graph/config/freeze-dev.cfg b/tools/power/pm-graph/config/freeze-dev.cfg
new file mode 100644
index 000000000..c4ad5cea3
--- /dev/null
+++ b/tools/power/pm-graph/config/freeze-dev.cfg
@@ -0,0 +1,93 @@
+#
+# Dev S2 (Freeze) test - includes src calls / kernel threads
+#
+# This is the configuration file for sleepgraph. It contains
+# all the tool arguments so that they don't have to be given on the
+# command line. It also includes advanced settings for functions
+# and kprobes. It is run like this
+#
+#    sudo ./sleepgraph.py -config config/freeze-dev.cfg
+#
+
+[Settings]
+
+# ---- General Options ----
+
+# Verbosity
+# print verbose messages (default: false)
+verbose: false
+
+# Suspend Mode
+# e.g. standby, mem, freeze, disk (default: mem)
+mode: freeze
+
+# Output Directory Format
+# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values
+output-dir: freeze-{hostname}-{date}-{time}-dev
+
+# Automatic Wakeup
+# Use rtcwake to autoresume after X seconds, or off to disable (default: 15)
+rtcwake: 15
+
+# Add Logs
+# add the dmesg and ftrace log to the html output (default: false)
+addlogs: false
+
+# Suspend/Resume Gap
+# insert a small visible gap between suspend and resume on the timeline (default: false)
+srgap: false
+
+# ---- Advanced Options ----
+
+# Command to execute in lieu of freeze (default: "")
+# command: echo freeze > /sys/power/state
+
+# Display user processes
+# graph user processes and cpu usage in the timeline (default: false)
+proc: false
+
+# Display function calls
+# graph source functions in the timeline (default: false)
+dev: true
+
+# Back to Back Suspend/Resume
+# Run two suspend/resumes back to back (default: false)
+x2: false
+
+# Back to Back Suspend Delay
+# Time delay between the two test runs in ms (default: 0 ms)
+x2delay: 0
+
+# Pre Suspend Delay
+# Include an N ms delay before (1st) suspend (default: 0 ms)
+predelay: 0
+
+# Post Resume Delay
+# Include an N ms delay after (last) resume (default: 0 ms)
+postdelay: 0
+
+# Minimum Device Length
+# graph only devices longer than min in the timeline (default: 0.001 ms)
+mindev: 1
+
+# ---- Debug Options ----
+
+# Callgraph
+# gather detailed ftrace callgraph data on all timeline events (default: false)
+callgraph: false
+
+# Expand Callgraph
+# pre-expand the callgraph data in the html output (default: disabled)
+expandcg: false
+
+# Minimum Callgraph Length
+# provide callgraph data for blocks longer than min (default: 0.001 ms)
+mincg: 1
+
+# Timestamp Precision
+# Number of significant digits in timestamps (0:S, [3:ms], 6:us)
+timeprec: 3
+
+# Device Filter
+# show only devs whose name/driver includes one of these strings
+# devicefilter: _cpu_up,_cpu_down,i915,usb
diff --git a/tools/power/pm-graph/config/freeze.cfg b/tools/power/pm-graph/config/freeze.cfg
new file mode 100644
index 000000000..0b70e0b74
--- /dev/null
+++ b/tools/power/pm-graph/config/freeze.cfg
@@ -0,0 +1,93 @@
+#
+# Generic S2 (Freeze) test
+#
+# This is the configuration file for sleepgraph. It contains
+# all the tool arguments so that they don't have to be given on the
+# command line. It also includes advanced settings for functions
+# and kprobes. It is run like this
+#
+#    sudo ./sleepgraph.py -config config/freeze.cfg
+#
+
+[Settings]
+
+# ---- General Options ----
+
+# Verbosity
+# print verbose messages (default: false)
+verbose: false
+
+# Suspend Mode
+# e.g. standby, mem, freeze, disk (default: mem)
+mode: freeze
+
+# Output Directory Format
+# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values
+output-dir: freeze-{hostname}-{date}-{time}
+
+# Automatic Wakeup
+# Use rtcwake to autoresume after X seconds, or off to disable (default: 15)
+rtcwake: 15
+
+# Add Logs
+# add the dmesg and ftrace log to the html output (default: false)
+addlogs: false
+
+# Suspend/Resume Gap
+# insert a small visible gap between suspend and resume on the timeline (default: false)
+srgap: false
+
+# ---- Advanced Options ----
+
+# Command to execute in lieu of freeze (default: "")
+# command: echo freeze > /sys/power/state
+
+# Display user processes
+# graph user processes and cpu usage in the timeline (default: false)
+proc: false
+
+# Display function calls
+# graph source functions in the timeline (default: false)
+dev: false
+
+# Back to Back Suspend/Resume
+# Run two suspend/resumes back to back (default: false)
+x2: false
+
+# Back to Back Suspend Delay
+# Time delay between the two test runs in ms (default: 0 ms)
+x2delay: 0
+
+# Pre Suspend Delay
+# Include an N ms delay before (1st) suspend (default: 0 ms)
+predelay: 0
+
+# Post Resume Delay
+# Include an N ms delay after (last) resume (default: 0 ms)
+postdelay: 0
+
+# Minimum Device Length
+# graph only devices longer than min in the timeline (default: 0.001 ms)
+mindev: 0.001
+
+# ---- Debug Options ----
+
+# Callgraph
+# gather detailed ftrace callgraph data on all timeline events (default: false)
+callgraph: false
+
+# Expand Callgraph
+# pre-expand the callgraph data in the html output (default: disabled)
+expandcg: false
+
+# Minimum Callgraph Length
+# provide callgraph data for blocks longer than min (default: 0.001 ms)
+mincg: 1
+
+# Timestamp Precision
+# Number of significant digits in timestamps (0:S, [3:ms], 6:us)
+timeprec: 3
+
+# Device Filter
+# show only devs whose name/driver includes one of these strings
+# devicefilter: _cpu_up,_cpu_down,i915,usb
diff --git a/tools/power/pm-graph/config/standby-callgraph.cfg b/tools/power/pm-graph/config/standby-callgraph.cfg
new file mode 100644
index 000000000..f52a6b9d5
--- /dev/null
+++ b/tools/power/pm-graph/config/standby-callgraph.cfg
@@ -0,0 +1,94 @@
+#
+# Full Callgraph for S1 (Standby) test
+#
+# This is the configuration file for sleepgraph. It contains
+# all the tool arguments so that they don't have to be given on the
+# command line. It also includes advanced settings for functions
+# and kprobes. It is run like this
+#
+#    sudo ./sleepgraph.py -config config/standby-callgraph.cfg
+#
+# NOTE: the output of this test is very large (> 30MB)
+
+[Settings]
+
+# ---- General Options ----
+
+# Verbosity
+# print verbose messages (default: false)
+verbose: false
+
+# Suspend Mode
+# e.g. standby, mem, freeze, disk (default: mem)
+mode: standby
+
+# Output Directory Format
+# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values
+output-dir: standby-{hostname}-{date}-{time}-cg
+
+# Automatic Wakeup
+# Use rtcwake to autoresume after X seconds, or off to disable (default: 15)
+rtcwake: 15
+
+# Add Logs
+# add the dmesg and ftrace log to the html output (default: false)
+addlogs: false
+
+# Suspend/Resume Gap
+# insert a small visible gap between suspend and resume on the timeline (default: false)
+srgap: false
+
+# ---- Advanced Options ----
+
+# Command to execute in lieu of standby (default: "")
+# command: echo standby > /sys/power/state
+
+# Display user processes
+# graph user processes and cpu usage in the timeline (default: false)
+proc: false
+
+# Display function calls
+# graph source functions in the timeline (default: false)
+dev: false
+
+# Back to Back Suspend/Resume
+# Run two suspend/resumes back to back (default: false)
+x2: false
+
+# Back to Back Suspend Delay
+# Time delay between the two test runs in ms (default: 0 ms)
+x2delay: 0
+
+# Pre Suspend Delay
+# Include an N ms delay before (1st) suspend (default: 0 ms)
+predelay: 0
+
+# Post Resume Delay
+# Include an N ms delay after (last) resume (default: 0 ms)
+postdelay: 0
+
+# Minimum Device Length
+# graph only devices longer than min in the timeline (default: 0.001 ms)
+mindev: 1
+
+# ---- Debug Options ----
+
+# Callgraph
+# gather detailed ftrace callgraph data on all timeline events (default: false)
+callgraph: true
+
+# Expand Callgraph
+# pre-expand the callgraph data in the html output (default: disabled)
+expandcg: false
+
+# Minimum Callgraph Length
+# provide callgraph data for blocks longer than min (default: 0.001 ms)
+mincg: 1
+
+# Timestamp Precision
+# Number of significant digits in timestamps (0:S, [3:ms], 6:us)
+timeprec: 6
+
+# Device Filter
+# show only devs whose name/driver includes one of these strings
+# devicefilter: _cpu_up,_cpu_down,i915,usb
diff --git a/tools/power/pm-graph/config/standby-dev.cfg b/tools/power/pm-graph/config/standby-dev.cfg
new file mode 100644
index 000000000..a5498ece3
--- /dev/null
+++ b/tools/power/pm-graph/config/standby-dev.cfg
@@ -0,0 +1,93 @@
+#
+# Dev S1 (Standby) test - includes src calls / kernel threads
+#
+# This is the configuration file for sleepgraph. It contains
+# all the tool arguments so that they don't have to be given on the
+# command line. It also includes advanced settings for functions
+# and kprobes. It is run like this
+#
+#    sudo ./sleepgraph.py -config config/standby-dev.cfg
+#
+
+[Settings]
+
+# ---- General Options ----
+
+# Verbosity
+# print verbose messages (default: false)
+verbose: false
+
+# Suspend Mode
+# e.g. standby, mem, freeze, disk (default: mem)
+mode: standby
+
+# Output Directory Format
+# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values
+output-dir: standby-{hostname}-{date}-{time}-dev
+
+# Automatic Wakeup
+# Use rtcwake to autoresume after X seconds, or off to disable (default: 15)
+rtcwake: 15
+
+# Add Logs
+# add the dmesg and ftrace log to the html output (default: false)
+addlogs: false
+
+# Suspend/Resume Gap
+# insert a small visible gap between suspend and resume on the timeline (default: false)
+srgap: false
+
+# ---- Advanced Options ----
+
+# Command to execute in lieu of standby (default: "")
+# command: echo standby > /sys/power/state
+
+# Display user processes
+# graph user processes and cpu usage in the timeline (default: false)
+proc: false
+
+# Display function calls
+# graph source functions in the timeline (default: false)
+dev: true
+
+# Back to Back Suspend/Resume
+# Run two suspend/resumes back to back (default: false)
+x2: false
+
+# Back to Back Suspend Delay
+# Time delay between the two test runs in ms (default: 0 ms)
+x2delay: 0
+
+# Pre Suspend Delay
+# Include an N ms delay before (1st) suspend (default: 0 ms)
+predelay: 0
+
+# Post Resume Delay
+# Include an N ms delay after (last) resume (default: 0 ms)
+postdelay: 0
+
+# Minimum Device Length
+# graph only devices longer than min in the timeline (default: 0.001 ms)
+mindev: 1
+
+# ---- Debug Options ----
+
+# Callgraph
+# gather detailed ftrace callgraph data on all timeline events (default: false)
+callgraph: false
+
+# Expand Callgraph
+# pre-expand the callgraph data in the html output (default: disabled)
+expandcg: false
+
+# Minimum Callgraph Length
+# provide callgraph data for blocks longer than min (default: 0.001 ms)
+mincg: 1
+
+# Timestamp Precision
+# Number of significant digits in timestamps (0:S, [3:ms], 6:us)
+timeprec: 3
+
+# Device Filter
+# show only devs whose name/driver includes one of these strings
+# devicefilter: _cpu_up,_cpu_down,i915,usb
diff --git a/tools/power/pm-graph/config/standby.cfg b/tools/power/pm-graph/config/standby.cfg
new file mode 100644
index 000000000..f0dd264df
--- /dev/null
+++ b/tools/power/pm-graph/config/standby.cfg
@@ -0,0 +1,93 @@
+#
+# Generic S1 (Standby) test
+#
+# This is the configuration file for sleepgraph. It contains
+# all the tool arguments so that they don't have to be given on the
+# command line. It also includes advanced settings for functions
+# and kprobes. It is run like this
+#
+#    sudo ./sleepgraph.py -config config/standby.cfg
+#
+
+[Settings]
+
+# ---- General Options ----
+
+# Verbosity
+# print verbose messages (default: false)
+verbose: false
+
+# Suspend Mode
+# e.g. standby, mem, freeze, disk (default: mem)
+mode: standby
+
+# Output Directory Format
+# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values
+output-dir: standby-{hostname}-{date}-{time}
+
+# Automatic Wakeup
+# Use rtcwake to autoresume after X seconds, or off to disable (default: 15)
+rtcwake: 15
+
+# Add Logs
+# add the dmesg and ftrace log to the html output (default: false)
+addlogs: false
+
+# Suspend/Resume Gap
+# insert a small visible gap between suspend and resume on the timeline (default: false)
+srgap: false
+
+# ---- Advanced Options ----
+
+# Command to execute in lieu of standby (default: "")
+# command: echo standby > /sys/power/state
+
+# Display user processes
+# graph user processes and cpu usage in the timeline (default: false)
+proc: false
+
+# Display function calls
+# graph source functions in the timeline (default: false)
+dev: false
+
+# Back to Back Suspend/Resume
+# Run two suspend/resumes back to back (default: false)
+x2: false
+
+# Back to Back Suspend Delay
+# Time delay between the two test runs in ms (default: 0 ms)
+x2delay: 0
+
+# Pre Suspend Delay
+# Include an N ms delay before (1st) suspend (default: 0 ms)
+predelay: 0
+
+# Post Resume Delay
+# Include an N ms delay after (last) resume (default: 0 ms)
+postdelay: 0
+
+# Minimum Device Length
+# graph only devices longer than min in the timeline (default: 0.001 ms)
+mindev: 0.001
+
+# ---- Debug Options ----
+
+# Callgraph
+# gather detailed ftrace callgraph data on all timeline events (default: false)
+callgraph: false
+
+# Expand Callgraph
+# pre-expand the callgraph data in the html output (default: disabled)
+expandcg: false
+
+# Minimum Callgraph Length
+# provide callgraph data for blocks longer than min (default: 0.001 ms)
+mincg: 1
+
+# Timestamp Precision
+# Number of significant digits in timestamps (0:S, [3:ms], 6:us)
+timeprec: 3
+
+# Device Filter
+# show only devs whose name/driver includes one of these strings
+# devicefilter: _cpu_up,_cpu_down,i915,usb
diff --git a/tools/power/pm-graph/config/suspend-callgraph.cfg b/tools/power/pm-graph/config/suspend-callgraph.cfg
new file mode 100644
index 000000000..11b8cbc12
--- /dev/null
+++ b/tools/power/pm-graph/config/suspend-callgraph.cfg
@@ -0,0 +1,98 @@
+#
+# Full Callgraph for S3 (Suspend to Mem) test
+#
+# This is the configuration file for sleepgraph. It contains
+# all the tool arguments so that they don't have to be given on the
+# command line. It also includes advanced settings for functions
+# and kprobes. It is run like this
+#
+#    sudo ./sleepgraph.py -config config/suspend.cfg
+#
+# NOTE: the output of this test is very large (> 30MB)
+
+[Settings]
+
+# ---- General Options ----
+
+# Verbosity
+# print verbose messages (default: false)
+verbose: false
+
+# Suspend Mode
+# e.g. standby, mem, freeze, disk (default: mem)
+mode: mem
+
+# Output Directory Format
+# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values
+output-dir: suspend-{hostname}-{date}-{time}-cg
+
+# Automatic Wakeup
+# Use rtcwake to autoresume after X seconds, or off to disable (default: 15)
+rtcwake: 15
+
+# Add Logs
+# add the dmesg and ftrace log to the html output (default: false)
+addlogs: false
+
+# Suspend/Resume Gap
+# insert a small visible gap between suspend and resume on the timeline (default: false)
+srgap: false
+
+# ---- Advanced Options ----
+
+# Command to execute in lieu of suspend (default: "")
+# command: echo mem > /sys/power/state
+
+# Display user processes
+# graph user processes and cpu usage in the timeline (default: false)
+proc: false
+
+# Display function calls
+# graph source functions in the timeline (default: false)
+dev: false
+
+# Back to Back Suspend/Resume
+# Run two suspend/resumes back to back (default: false)
+x2: false
+
+# Back to Back Suspend Delay
+# Time delay between the two test runs in ms (default: 0 ms)
+x2delay: 0
+
+# Pre Suspend Delay
+# Include an N ms delay before (1st) suspend (default: 0 ms)
+predelay: 0
+
+# Post Resume Delay
+# Include an N ms delay after (last) resume (default: 0 ms)
+postdelay: 0
+
+# Minimum Device Length
+# graph only devices longer than min in the timeline (default: 0.001 ms)
+mindev: 0.001
+
+# ---- Debug Options ----
+
+# Callgraph
+# gather detailed ftrace callgraph data on all timeline events (default: false)
+callgraph: true
+
+# Max graph depth
+# limit the callgraph trace to this depth (default: 0 = all)
+maxdepth: 5
+
+# Expand Callgraph
+# pre-expand the callgraph data in the html output (default: disabled)
+expandcg: false
+
+# Minimum Callgraph Length
+# provide callgraph data for blocks longer than min (default: 0.001 ms)
+mincg: 1
+
+# Timestamp Precision
+# Number of significant digits in timestamps (0:S, [3:ms], 6:us)
+timeprec: 6
+
+# Device Filter
+# show only devs whose name/driver includes one of these strings
+# devicefilter: _cpu_up,_cpu_down,i915,usb
diff --git a/tools/power/pm-graph/config/suspend-dev.cfg b/tools/power/pm-graph/config/suspend-dev.cfg
new file mode 100644
index 000000000..56f1d21cc
--- /dev/null
+++ b/tools/power/pm-graph/config/suspend-dev.cfg
@@ -0,0 +1,93 @@
+#
+# Dev S3 (Suspend to Mem) test - includes src calls / kernel threads
+#
+# This is the configuration file for sleepgraph. It contains
+# all the tool arguments so that they don't have to be given on the
+# command line. It also includes advanced settings for functions
+# and kprobes. It is run like this
+#
+#    sudo ./sleepgraph.py -config config/suspend-dev.cfg
+#
+
+[Settings]
+
+# ---- General Options ----
+
+# Verbosity
+# print verbose messages (default: false)
+verbose: false
+
+# Suspend Mode
+# e.g. standby, mem, freeze, disk (default: mem)
+mode: mem
+
+# Output Directory Format
+# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values
+output-dir: suspend-{hostname}-{date}-{time}-dev
+
+# Automatic Wakeup
+# Use rtcwake to autoresume after X seconds, or off to disable (default: 15)
+rtcwake: 15
+
+# Add Logs
+# add the dmesg and ftrace log to the html output (default: false)
+addlogs: false
+
+# Suspend/Resume Gap
+# insert a small visible gap between suspend and resume on the timeline (default: false)
+srgap: false
+
+# ---- Advanced Options ----
+
+# Command to execute in lieu of suspend (default: "")
+# command: echo mem > /sys/power/state
+
+# Display user processes
+# graph user processes and cpu usage in the timeline (default: false)
+proc: false
+
+# Display function calls
+# graph source functions in the timeline (default: false)
+dev: true
+
+# Back to Back Suspend/Resume
+# Run two suspend/resumes back to back (default: false)
+x2: false
+
+# Back to Back Suspend Delay
+# Time delay between the two test runs in ms (default: 0 ms)
+x2delay: 0
+
+# Pre Suspend Delay
+# Include an N ms delay before (1st) suspend (default: 0 ms)
+predelay: 0
+
+# Post Resume Delay
+# Include an N ms delay after (last) resume (default: 0 ms)
+postdelay: 0
+
+# Minimum Device Length
+# graph only devices longer than min in the timeline (default: 0.001 ms)
+mindev: 1
+
+# ---- Debug Options ----
+
+# Callgraph
+# gather detailed ftrace callgraph data on all timeline events (default: false)
+callgraph: false
+
+# Expand Callgraph
+# pre-expand the callgraph data in the html output (default: disabled)
+expandcg: false
+
+# Minimum Callgraph Length
+# provide callgraph data for blocks longer than min (default: 0.001 ms)
+mincg: 1
+
+# Timestamp Precision
+# Number of significant digits in timestamps (0:S, [3:ms], 6:us)
+timeprec: 3
+
+# Device Filter
+# show only devs whose name/driver includes one of these strings
+# devicefilter: _cpu_up,_cpu_down,i915,usb
diff --git a/tools/power/pm-graph/config/suspend-x2-proc.cfg b/tools/power/pm-graph/config/suspend-x2-proc.cfg
new file mode 100644
index 000000000..0ecca0ede
--- /dev/null
+++ b/tools/power/pm-graph/config/suspend-x2-proc.cfg
@@ -0,0 +1,93 @@
+#
+# Proc S3 (Suspend to Mem) x2 test - includes user processes
+#
+# This is the configuration file for sleepgraph. It contains
+# all the tool arguments so that they don't have to be given on the
+# command line. It also includes advanced settings for functions
+# and kprobes. It is run like this
+#
+#    sudo ./sleepgraph.py -config config/suspend-proc.cfg
+#
+
+[Settings]
+
+# ---- General Options ----
+
+# Verbosity
+# print verbose messages (default: false)
+verbose: false
+
+# Suspend Mode
+# e.g. standby, mem, freeze, disk (default: mem)
+mode: mem
+
+# Output Directory Format
+# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values
+output-dir: suspend-{hostname}-{date}-{time}-x2-proc
+
+# Automatic Wakeup
+# Use rtcwake to autoresume after X seconds, or off to disable (default: 15)
+rtcwake: 15
+
+# Add Logs
+# add the dmesg and ftrace log to the html output (default: false)
+addlogs: false
+
+# Suspend/Resume Gap
+# insert a small visible gap between suspend and resume on the timeline (default: false)
+srgap: false
+
+# ---- Advanced Options ----
+
+# Command to execute in lieu of suspend (default: "")
+# command: echo mem > /sys/power/state
+
+# Display user processes
+# graph user processes and cpu usage in the timeline (default: false)
+proc: true
+
+# Display function calls
+# graph source functions in the timeline (default: false)
+dev: false
+
+# Back to Back Suspend/Resume
+# Run two suspend/resumes back to back (default: false)
+x2: true
+
+# Back to Back Suspend Delay
+# Time delay between the two test runs in ms (default: 0 ms)
+x2delay: 1000
+
+# Pre Suspend Delay
+# Include an N ms delay before (1st) suspend (default: 0 ms)
+predelay: 1000
+
+# Post Resume Delay
+# Include an N ms delay after (last) resume (default: 0 ms)
+postdelay: 1000
+
+# Minimum Device Length
+# graph only devices longer than min in the timeline (default: 0.001 ms)
+mindev: 1
+
+# ---- Debug Options ----
+
+# Callgraph
+# gather detailed ftrace callgraph data on all timeline events (default: false)
+callgraph: false
+
+# Expand Callgraph
+# pre-expand the callgraph data in the html output (default: disabled)
+expandcg: false
+
+# Minimum Callgraph Length
+# provide callgraph data for blocks longer than min (default: 0.001 ms)
+mincg: 1
+
+# Timestamp Precision
+# Number of significant digits in timestamps (0:S, [3:ms], 6:us)
+timeprec: 3
+
+# Device Filter
+# show only devs whose name/driver includes one of these strings
+# devicefilter: _cpu_up,_cpu_down,i915,usb
diff --git a/tools/power/pm-graph/config/suspend.cfg b/tools/power/pm-graph/config/suspend.cfg
new file mode 100644
index 000000000..70d293231
--- /dev/null
+++ b/tools/power/pm-graph/config/suspend.cfg
@@ -0,0 +1,93 @@
+#
+# Generic S3 (Suspend to Mem) test
+#
+# This is the configuration file for sleepgraph. It contains
+# all the tool arguments so that they don't have to be given on the
+# command line. It also includes advanced settings for functions
+# and kprobes. It is run like this
+#
+#    sudo ./sleepgraph.py -config config/suspend.cfg
+#
+
+[Settings]
+
+# ---- General Options ----
+
+# Verbosity
+# print verbose messages (default: false)
+verbose: false
+
+# Suspend Mode
+# e.g. standby, mem, freeze, disk (default: mem)
+mode: mem
+
+# Output Directory Format
+# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values
+output-dir: suspend-{hostname}-{date}-{time}
+
+# Automatic Wakeup
+# Use rtcwake to autoresume after X seconds, or off to disable (default: 15)
+rtcwake: 15
+
+# Add Logs
+# add the dmesg and ftrace log to the html output (default: false)
+addlogs: false
+
+# Suspend/Resume Gap
+# insert a small visible gap between suspend and resume on the timeline (default: false)
+srgap: false
+
+# ---- Advanced Options ----
+
+# Command to execute in lieu of suspend (default: "")
+# command: echo mem > /sys/power/state
+
+# Display user processes
+# graph user processes and cpu usage in the timeline (default: false)
+proc: false
+
+# Display function calls
+# graph source functions in the timeline (default: false)
+dev: false
+
+# Back to Back Suspend/Resume
+# Run two suspend/resumes back to back (default: false)
+x2: false
+
+# Back to Back Suspend Delay
+# Time delay between the two test runs in ms (default: 0 ms)
+x2delay: 0
+
+# Pre Suspend Delay
+# Include an N ms delay before (1st) suspend (default: 0 ms)
+predelay: 0
+
+# Post Resume Delay
+# Include an N ms delay after (last) resume (default: 0 ms)
+postdelay: 0
+
+# Minimum Device Length
+# graph only devices longer than min in the timeline (default: 0.001 ms)
+mindev: 0.001
+
+# ---- Debug Options ----
+
+# Callgraph
+# gather detailed ftrace callgraph data on all timeline events (default: false)
+callgraph: false
+
+# Expand Callgraph
+# pre-expand the callgraph data in the html output (default: disabled)
+expandcg: false
+
+# Minimum Callgraph Length
+# provide callgraph data for blocks longer than min (default: 0.001 ms)
+mincg: 1
+
+# Timestamp Precision
+# Number of significant digits in timestamps (0:S, [3:ms], 6:us)
+timeprec: 3
+
+# Device Filter
+# show only devs whose name/driver includes one of these strings
+# devicefilter: _cpu_up,_cpu_down,i915,usb