Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 245 insertions, 0 deletions

diff --git a/tools/testing/selftests/drivers/net/bonding/option_prio.sh b/tools/testing/selftests/drivers/net/bonding/option_prio.sh
new file mode 100755
index 000000000..c32eebff5
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/option_prio.sh
@@ -0,0 +1,245 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test bonding option prio
+#
+
+ALL_TESTS="
+	prio_arp_ip_target_test
+	prio_miimon_test
+"
+
+REQUIRE_MZ=no
+REQUIRE_JQ=no
+NUM_NETIFS=0
+lib_dir=$(dirname "$0")
+source "$lib_dir"/net_forwarding_lib.sh
+
+destroy()
+{
+	ip link del bond0 &>/dev/null
+	ip link del br0 &>/dev/null
+	ip link del veth0 &>/dev/null
+	ip link del veth1 &>/dev/null
+	ip link del veth2 &>/dev/null
+	ip netns del ns1 &>/dev/null
+	ip link del veth3 &>/dev/null
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	destroy
+}
+
+skip()
+{
+        local skip=1
+	ip link add name bond0 type bond mode 1 miimon 100 &>/dev/null
+	ip link add name veth0 type veth peer name veth0_p
+	ip link set veth0 master bond0
+
+	# check if iproute support prio option
+	ip link set dev veth0 type bond_slave prio 10
+	[[ $? -ne 0 ]] && skip=0
+
+	# check if bonding support prio option
+	ip -d link show veth0 | grep -q "prio 10"
+	[[ $? -ne 0 ]] && skip=0
+
+	ip link del bond0 &>/dev/null
+	ip link del veth0
+
+	return $skip
+}
+
+active_slave=""
+check_active_slave()
+{
+	local target_active_slave=$1
+	active_slave="$(cat /sys/class/net/bond0/bonding/active_slave)"
+	test "$active_slave" = "$target_active_slave"
+	check_err $? "Current active slave is $active_slave but not $target_active_slave"
+}
+
+
+# Test bonding prio option with mode=$mode monitor=$monitor
+# and primary_reselect=$primary_reselect
+prio_test()
+{
+	RET=0
+
+	local monitor=$1
+	local mode=$2
+	local primary_reselect=$3
+
+	local bond_ip4="192.169.1.2"
+	local peer_ip4="192.169.1.1"
+	local bond_ip6="2009:0a:0b::02"
+	local peer_ip6="2009:0a:0b::01"
+
+
+	# create veths
+	ip link add name veth0 type veth peer name veth0_p
+	ip link add name veth1 type veth peer name veth1_p
+	ip link add name veth2 type veth peer name veth2_p
+
+	# create bond
+	if [[ "$monitor" == "miimon" ]];then
+		ip link add name bond0 type bond mode $mode miimon 100 primary veth1 primary_reselect $primary_reselect
+	elif [[ "$monitor" == "arp_ip_target" ]];then
+		ip link add name bond0 type bond mode $mode arp_interval 1000 arp_ip_target $peer_ip4 primary veth1 primary_reselect $primary_reselect
+	elif [[ "$monitor" == "ns_ip6_target" ]];then
+		ip link add name bond0 type bond mode $mode arp_interval 1000 ns_ip6_target $peer_ip6 primary veth1 primary_reselect $primary_reselect
+	fi
+	ip link set bond0 up
+	ip link set veth0 master bond0
+	ip link set veth1 master bond0
+	ip link set veth2 master bond0
+	# check bonding member prio value
+	ip link set dev veth0 type bond_slave prio 0
+	ip link set dev veth1 type bond_slave prio 10
+	ip link set dev veth2 type bond_slave prio 11
+	ip -d link show veth0 | grep -q 'prio 0'
+	check_err $? "veth0 prio is not 0"
+	ip -d link show veth1 | grep -q 'prio 10'
+	check_err $? "veth0 prio is not 10"
+	ip -d link show veth2 | grep -q 'prio 11'
+	check_err $? "veth0 prio is not 11"
+
+	ip link set veth0 up
+	ip link set veth1 up
+	ip link set veth2 up
+	ip link set veth0_p up
+	ip link set veth1_p up
+	ip link set veth2_p up
+
+	# prepare ping target
+	ip link add name br0 type bridge
+	ip link set br0 up
+	ip link set veth0_p master br0
+	ip link set veth1_p master br0
+	ip link set veth2_p master br0
+	ip link add name veth3 type veth peer name veth3_p
+	ip netns add ns1
+	ip link set veth3_p master br0 up
+	ip link set veth3 netns ns1 up
+	ip netns exec ns1 ip addr add $peer_ip4/24 dev veth3
+	ip netns exec ns1 ip addr add $peer_ip6/64 dev veth3
+	ip addr add $bond_ip4/24 dev bond0
+	ip addr add $bond_ip6/64 dev bond0
+	sleep 5
+
+	ping $peer_ip4 -c5 -I bond0 &>/dev/null
+	check_err $? "ping failed 1."
+	ping6 $peer_ip6 -c5 -I bond0 &>/dev/null
+	check_err $? "ping6 failed 1."
+
+	# active salve should be the primary slave
+	check_active_slave veth1
+
+	# active slave should be the higher prio slave
+	ip link set $active_slave down
+	ping $peer_ip4 -c5 -I bond0 &>/dev/null
+	check_err $? "ping failed 2."
+	check_active_slave veth2
+
+	# when only 1 slave is up
+	ip link set $active_slave down
+	ping $peer_ip4 -c5 -I bond0 &>/dev/null
+	check_err $? "ping failed 3."
+	check_active_slave veth0
+
+	# when a higher prio slave change to up
+	ip link set veth2 up
+	ping $peer_ip4 -c5 -I bond0 &>/dev/null
+	check_err $? "ping failed 4."
+	case $primary_reselect in
+		"0")
+			check_active_slave "veth2"
+			;;
+		"1")
+			check_active_slave "veth0"
+			;;
+		"2")
+			check_active_slave "veth0"
+			;;
+	esac
+	local pre_active_slave=$active_slave
+
+	# when the primary slave change to up
+	ip link set veth1 up
+	ping $peer_ip4 -c5 -I bond0 &>/dev/null
+	check_err $? "ping failed 5."
+	case $primary_reselect in
+		"0")
+			check_active_slave "veth1"
+			;;
+		"1")
+			check_active_slave "$pre_active_slave"
+			;;
+		"2")
+			check_active_slave "$pre_active_slave"
+			ip link set $active_slave down
+			ping $peer_ip4 -c5 -I bond0 &>/dev/null
+			check_err $? "ping failed 6."
+			check_active_slave "veth1"
+			;;
+	esac
+
+	# Test changing bond salve prio
+	if [[ "$primary_reselect" == "0" ]];then
+		ip link set dev veth0 type bond_slave prio 1000000
+		ip link set dev veth1 type bond_slave prio 0
+		ip link set dev veth2 type bond_slave prio -50
+		ip -d link show veth0 | grep -q 'prio 1000000'
+		check_err $? "veth0 prio is not 1000000"
+		ip -d link show veth1 | grep -q 'prio 0'
+		check_err $? "veth1 prio is not 0"
+		ip -d link show veth2 | grep -q 'prio -50'
+		check_err $? "veth3 prio is not -50"
+		check_active_slave "veth1"
+
+		ip link set $active_slave down
+		ping $peer_ip4 -c5 -I bond0 &>/dev/null
+		check_err $? "ping failed 7."
+		check_active_slave "veth0"
+	fi
+
+	cleanup
+
+	log_test "prio_test" "Test bonding option 'prio' with mode=$mode monitor=$monitor and primary_reselect=$primary_reselect"
+}
+
+prio_miimon_test()
+{
+	local mode
+	local primary_reselect
+
+	for mode in 1 5 6; do
+		for primary_reselect in 0 1 2; do
+			prio_test "miimon" $mode $primary_reselect
+		done
+	done
+}
+
+prio_arp_ip_target_test()
+{
+	local primary_reselect
+
+	for primary_reselect in 0 1 2; do
+		prio_test "arp_ip_target" 1 $primary_reselect
+	done
+}
+
+if skip;then
+	log_test_skip "option_prio.sh" "Current iproute doesn't support 'prio'."
+	exit 0
+fi
+
+trap cleanup EXIT
+
+tests_run
+
+exit "$EXIT_STATUS"