Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 283 insertions, 0 deletions

diff --git a/tools/testing/selftests/net/devlink_port_split.py b/tools/testing/selftests/net/devlink_port_split.py
new file mode 100755
index 000000000..2b5d6ff87
--- /dev/null
+++ b/tools/testing/selftests/net/devlink_port_split.py
@@ -0,0 +1,283 @@
+#!/usr/bin/env python3
+# SPDX-License-Identifier: GPL-2.0
+
+from subprocess import PIPE, Popen
+import json
+import time
+import argparse
+import collections
+import sys
+
+#
+# Test port split configuration using devlink-port lanes attribute.
+# The test is skipped in case the attribute is not available.
+#
+# First, check that all the ports with 1 lane fail to split.
+# Second, check that all the ports with more than 1 lane can be split
+# to all valid configurations (e.g., split to 2, split to 4 etc.)
+#
+
+
+# Kselftest framework requirement - SKIP code is 4
+KSFT_SKIP=4
+Port = collections.namedtuple('Port', 'bus_info name')
+
+
+def run_command(cmd, should_fail=False):
+    """
+    Run a command in subprocess.
+    Return: Tuple of (stdout, stderr).
+    """
+
+    p = Popen(cmd, stdout=PIPE, stderr=PIPE, shell=True)
+    stdout, stderr = p.communicate()
+    stdout, stderr = stdout.decode(), stderr.decode()
+
+    if stderr != "" and not should_fail:
+        print("Error sending command: %s" % cmd)
+        print(stdout)
+        print(stderr)
+    return stdout, stderr
+
+
+class devlink_ports(object):
+    """
+    Class that holds information on the devlink ports, required to the tests;
+    if_names: A list of interfaces in the devlink ports.
+    """
+
+    def get_if_names(dev):
+        """
+        Get a list of physical devlink ports.
+        Return: Array of tuples (bus_info/port, if_name).
+        """
+
+        arr = []
+
+        cmd = "devlink -j port show"
+        stdout, stderr = run_command(cmd)
+        assert stderr == ""
+        ports = json.loads(stdout)['port']
+
+        for port in ports:
+            if dev in port:
+                if ports[port]['flavour'] == 'physical':
+                    arr.append(Port(bus_info=port, name=ports[port]['netdev']))
+
+        return arr
+
+    def __init__(self, dev):
+        self.if_names = devlink_ports.get_if_names(dev)
+
+
+def get_max_lanes(port):
+    """
+    Get the $port's maximum number of lanes.
+    Return: number of lanes, e.g. 1, 2, 4 and 8.
+    """
+
+    cmd = "devlink -j port show %s" % port
+    stdout, stderr = run_command(cmd)
+    assert stderr == ""
+    values = list(json.loads(stdout)['port'].values())[0]
+
+    if 'lanes' in values:
+        lanes = values['lanes']
+    else:
+        lanes = 0
+    return lanes
+
+
+def get_split_ability(port):
+    """
+    Get the $port split ability.
+    Return: split ability, true or false.
+    """
+
+    cmd = "devlink -j port show %s" % port.name
+    stdout, stderr = run_command(cmd)
+    assert stderr == ""
+    values = list(json.loads(stdout)['port'].values())[0]
+
+    return values['splittable']
+
+
+def split(k, port, should_fail=False):
+    """
+    Split $port into $k ports.
+    If should_fail == True, the split should fail. Otherwise, should pass.
+    Return: Array of sub ports after splitting.
+            If the $port wasn't split, the array will be empty.
+    """
+
+    cmd = "devlink port split %s count %s" % (port.bus_info, k)
+    stdout, stderr = run_command(cmd, should_fail=should_fail)
+
+    if should_fail:
+        if not test(stderr != "", "%s is unsplittable" % port.name):
+            print("split an unsplittable port %s" % port.name)
+            return create_split_group(port, k)
+    else:
+        if stderr == "":
+            return create_split_group(port, k)
+        print("didn't split a splittable port %s" % port.name)
+
+    return []
+
+
+def unsplit(port):
+    """
+    Unsplit $port.
+    """
+
+    cmd = "devlink port unsplit %s" % port
+    stdout, stderr = run_command(cmd)
+    test(stderr == "", "Unsplit port %s" % port)
+
+
+def exists(port, dev):
+    """
+    Check if $port exists in the devlink ports.
+    Return: True is so, False otherwise.
+    """
+
+    return any(dev_port.name == port
+               for dev_port in devlink_ports.get_if_names(dev))
+
+
+def exists_and_lanes(ports, lanes, dev):
+    """
+    Check if every port in the list $ports exists in the devlink ports and has
+    $lanes number of lanes after splitting.
+    Return: True if both are True, False otherwise.
+    """
+
+    for port in ports:
+        max_lanes = get_max_lanes(port)
+        if not exists(port, dev):
+            print("port %s doesn't exist in devlink ports" % port)
+            return False
+        if max_lanes != lanes:
+            print("port %s has %d lanes, but %s were expected"
+                  % (port, lanes, max_lanes))
+            return False
+    return True
+
+
+def test(cond, msg):
+    """
+    Check $cond and print a message accordingly.
+    Return: True is pass, False otherwise.
+    """
+
+    if cond:
+        print("TEST: %-60s [ OK ]" % msg)
+    else:
+        print("TEST: %-60s [FAIL]" % msg)
+
+    return cond
+
+
+def create_split_group(port, k):
+    """
+    Create the split group for $port.
+    Return: Array with $k elements, which are the split port group.
+    """
+
+    return list(port.name + "s" + str(i) for i in range(k))
+
+
+def split_unsplittable_port(port, k):
+    """
+    Test that splitting of unsplittable port fails.
+    """
+
+    # split to max
+    new_split_group = split(k, port, should_fail=True)
+
+    if new_split_group != []:
+        unsplit(port.bus_info)
+
+
+def split_splittable_port(port, k, lanes, dev):
+    """
+    Test that splitting of splittable port passes correctly.
+    """
+
+    new_split_group = split(k, port)
+
+    # Once the split command ends, it takes some time to the sub ifaces'
+    # to get their names. Use udevadm to continue only when all current udev
+    # events are handled.
+    cmd = "udevadm settle"
+    stdout, stderr = run_command(cmd)
+    assert stderr == ""
+
+    if new_split_group != []:
+        test(exists_and_lanes(new_split_group, lanes/k, dev),
+             "split port %s into %s" % (port.name, k))
+
+    unsplit(port.bus_info)
+
+
+def make_parser():
+    parser = argparse.ArgumentParser(description='A test for port splitting.')
+    parser.add_argument('--dev',
+                        help='The devlink handle of the device under test. ' +
+                             'The default is the first registered devlink ' +
+                             'handle.')
+
+    return parser
+
+
+def main(cmdline=None):
+    parser = make_parser()
+    args = parser.parse_args(cmdline)
+
+    dev = args.dev
+    if not dev:
+        cmd = "devlink -j dev show"
+        stdout, stderr = run_command(cmd)
+        assert stderr == ""
+
+        devs = json.loads(stdout)['dev']
+        if devs:
+            dev = list(devs.keys())[0]
+        else:
+            print("no devlink device was found, test skipped")
+            sys.exit(KSFT_SKIP)
+
+    cmd = "devlink dev show %s" % dev
+    stdout, stderr = run_command(cmd)
+    if stderr != "":
+        print("devlink device %s can not be found" % dev)
+        sys.exit(1)
+
+    ports = devlink_ports(dev)
+
+    for port in ports.if_names:
+        max_lanes = get_max_lanes(port.name)
+
+        # If max lanes is 0, do not test port splitting at all
+        if max_lanes == 0:
+            continue
+
+        # If 1 lane, shouldn't be able to split
+        elif max_lanes == 1:
+            test(not get_split_ability(port),
+                 "%s should not be able to split" % port.name)
+            split_unsplittable_port(port, max_lanes)
+
+        # Else, splitting should pass and all the split ports should exist.
+        else:
+            lane = max_lanes
+            test(get_split_ability(port),
+                 "%s should be able to split" % port.name)
+            while lane > 1:
+                split_splittable_port(port, lane, max_lanes, dev)
+
+                lane //= 2
+
+
+if __name__ == "__main__":
+    main()