Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 631 insertions, 0 deletions

diff --git a/tools/testing/selftests/ntb/ntb_test.sh b/tools/testing/selftests/ntb/ntb_test.sh
new file mode 100755
index 000000000..020137b61
--- /dev/null
+++ b/tools/testing/selftests/ntb/ntb_test.sh
@@ -0,0 +1,631 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2016 Microsemi. All Rights Reserved.
+#
+# Author: Logan Gunthorpe <logang@deltatee.com>
+
+REMOTE_HOST=
+LIST_DEVS=FALSE
+
+DEBUGFS=${DEBUGFS-/sys/kernel/debug}
+
+PERF_RUN_ORDER=32
+MAX_MW_SIZE=0
+RUN_DMA_TESTS=
+DONT_CLEANUP=
+MW_SIZE=65536
+
+function show_help()
+{
+	echo "Usage: $0 [OPTIONS] LOCAL_DEV REMOTE_DEV"
+	echo "Run tests on a pair of NTB endpoints."
+	echo
+	echo "If the NTB device loops back to the same host then,"
+	echo "just specifying the two PCI ids on the command line is"
+	echo "sufficient. Otherwise, if the NTB link spans two hosts"
+	echo "use the -r option to specify the hostname for the remote"
+	echo "device. SSH will then be used to test the remote side."
+	echo "An SSH key between the root users of the host would then"
+	echo "be highly recommended."
+	echo
+	echo "Options:"
+	echo "  -C              don't cleanup ntb modules on exit"
+	echo "  -h              show this help message"
+	echo "  -l              list available local and remote PCI ids"
+	echo "  -r REMOTE_HOST  specify the remote's hostname to connect"
+	echo "                  to for the test (using ssh)"
+	echo "  -m MW_SIZE      memory window size for ntb_tool"
+	echo "                  (default: $MW_SIZE)"
+	echo "  -d              run dma tests for ntb_perf"
+	echo "  -p ORDER        total data order for ntb_perf"
+	echo "                  (default: $PERF_RUN_ORDER)"
+	echo "  -w MAX_MW_SIZE  maxmium memory window size for ntb_perf"
+	echo
+}
+
+function parse_args()
+{
+	OPTIND=0
+	while getopts "b:Cdhlm:r:p:w:" opt; do
+		case "$opt" in
+		C)  DONT_CLEANUP=1 ;;
+		d)  RUN_DMA_TESTS=1 ;;
+		h)  show_help; exit 0 ;;
+		l)  LIST_DEVS=TRUE ;;
+		m)  MW_SIZE=${OPTARG} ;;
+		r)  REMOTE_HOST=${OPTARG} ;;
+		p)  PERF_RUN_ORDER=${OPTARG} ;;
+		w)  MAX_MW_SIZE=${OPTARG} ;;
+		\?)
+		    echo "Invalid option: -$OPTARG" >&2
+		    exit 1
+		    ;;
+		esac
+	done
+}
+
+parse_args "$@"
+shift $((OPTIND-1))
+LOCAL_DEV=$1
+shift
+parse_args "$@"
+shift $((OPTIND-1))
+REMOTE_DEV=$1
+shift
+parse_args "$@"
+
+set -e
+
+function _modprobe()
+{
+	modprobe "$@" || return 1
+
+	if [[ "$REMOTE_HOST" != "" ]]; then
+		ssh "$REMOTE_HOST" modprobe "$@" || return 1
+	fi
+}
+
+function split_remote()
+{
+	VPATH=$1
+	REMOTE=
+
+	if [[ "$VPATH" == *":/"* ]]; then
+		REMOTE=${VPATH%%:*}
+		VPATH=${VPATH#*:}
+	fi
+}
+
+function read_file()
+{
+	split_remote $1
+	if [[ "$REMOTE" != "" ]]; then
+		ssh "$REMOTE" cat "$VPATH"
+	else
+		cat "$VPATH"
+	fi
+}
+
+function write_file()
+{
+	split_remote $2
+	VALUE=$1
+
+	if [[ "$REMOTE" != "" ]]; then
+		ssh "$REMOTE" "echo \"$VALUE\" > \"$VPATH\""
+	else
+		echo "$VALUE" > "$VPATH"
+	fi
+}
+
+function check_file()
+{
+	split_remote $1
+
+	if [[ "$REMOTE" != "" ]]; then
+		ssh "$REMOTE" "[[ -e ${VPATH} ]]"
+	else
+		[[ -e ${VPATH} ]]
+	fi
+}
+
+function subdirname()
+{
+	echo $(basename $(dirname $1)) 2> /dev/null
+}
+
+function find_pidx()
+{
+	PORT=$1
+	PPATH=$2
+
+	for ((i = 0; i < 64; i++)); do
+		PEER_DIR="$PPATH/peer$i"
+
+		check_file ${PEER_DIR} || break
+
+		PEER_PORT=$(read_file "${PEER_DIR}/port")
+		if [[ ${PORT} -eq $PEER_PORT ]]; then
+			echo $i
+			return 0
+		fi
+	done
+
+	return 1
+}
+
+function port_test()
+{
+	LOC=$1
+	REM=$2
+
+	echo "Running port tests on: $(basename $LOC) / $(basename $REM)"
+
+	LOCAL_PORT=$(read_file "$LOC/port")
+	REMOTE_PORT=$(read_file "$REM/port")
+
+	LOCAL_PIDX=$(find_pidx ${REMOTE_PORT} "$LOC")
+	REMOTE_PIDX=$(find_pidx ${LOCAL_PORT} "$REM")
+
+	echo "Local port ${LOCAL_PORT} with index ${REMOTE_PIDX} on remote host"
+	echo "Peer port ${REMOTE_PORT} with index ${LOCAL_PIDX} on local host"
+
+	echo "  Passed"
+}
+
+function link_test()
+{
+	LOC=$1
+	REM=$2
+	EXP=0
+
+	echo "Running link tests on: $(subdirname $LOC) / $(subdirname $REM)"
+
+	if ! write_file "N" "$LOC/../link" 2> /dev/null; then
+		echo "  Unsupported"
+		return
+	fi
+
+	write_file "N" "$LOC/link_event"
+
+	if [[ $(read_file "$REM/link") != "N" ]]; then
+		echo "Expected link to be down in $REM/link" >&2
+		exit -1
+	fi
+
+	write_file "Y" "$LOC/../link"
+
+	echo "  Passed"
+}
+
+function doorbell_test()
+{
+	LOC=$1
+	REM=$2
+	EXP=0
+
+	echo "Running db tests on: $(basename $LOC) / $(basename $REM)"
+
+	DB_VALID_MASK=$(read_file "$LOC/db_valid_mask")
+
+	write_file "c $DB_VALID_MASK" "$REM/db"
+
+	for ((i = 0; i < 64; i++)); do
+		DB=$(read_file "$REM/db")
+		if [[ "$DB" -ne "$EXP" ]]; then
+			echo "Doorbell doesn't match expected value $EXP " \
+			     "in $REM/db" >&2
+			exit -1
+		fi
+
+		let "MASK = (1 << $i) & $DB_VALID_MASK" || true
+		let "EXP = $EXP | $MASK" || true
+
+		write_file "s $MASK" "$LOC/peer_db"
+	done
+
+	write_file "c $DB_VALID_MASK" "$REM/db_mask"
+	write_file $DB_VALID_MASK "$REM/db_event"
+	write_file "s $DB_VALID_MASK" "$REM/db_mask"
+
+	write_file "c $DB_VALID_MASK" "$REM/db"
+
+	echo "  Passed"
+}
+
+function get_files_count()
+{
+	NAME=$1
+	LOC=$2
+
+	split_remote $LOC
+
+	if [[ "$REMOTE" == "" ]]; then
+		echo $(ls -1 "$VPATH"/${NAME}* 2>/dev/null | wc -l)
+	else
+		echo $(ssh "$REMOTE" "ls -1 \"$VPATH\"/${NAME}* | \
+		       wc -l" 2> /dev/null)
+	fi
+}
+
+function scratchpad_test()
+{
+	LOC=$1
+	REM=$2
+
+	echo "Running spad tests on: $(subdirname $LOC) / $(subdirname $REM)"
+
+	CNT=$(get_files_count "spad" "$LOC")
+
+	if [[ $CNT -eq 0 ]]; then
+		echo "  Unsupported"
+		return
+	fi
+
+	for ((i = 0; i < $CNT; i++)); do
+		VAL=$RANDOM
+		write_file "$VAL" "$LOC/spad$i"
+		RVAL=$(read_file "$REM/../spad$i")
+
+		if [[ "$VAL" -ne "$RVAL" ]]; then
+			echo "Scratchpad $i value $RVAL doesn't match $VAL" >&2
+			exit -1
+		fi
+	done
+
+	echo "  Passed"
+}
+
+function message_test()
+{
+	LOC=$1
+	REM=$2
+
+	echo "Running msg tests on: $(subdirname $LOC) / $(subdirname $REM)"
+
+	CNT=$(get_files_count "msg" "$LOC")
+
+	if [[ $CNT -eq 0 ]]; then
+		echo "  Unsupported"
+		return
+	fi
+
+	MSG_OUTBITS_MASK=$(read_file "$LOC/../msg_inbits")
+	MSG_INBITS_MASK=$(read_file "$REM/../msg_inbits")
+
+	write_file "c $MSG_OUTBITS_MASK" "$LOC/../msg_sts"
+	write_file "c $MSG_INBITS_MASK" "$REM/../msg_sts"
+
+	for ((i = 0; i < $CNT; i++)); do
+		VAL=$RANDOM
+		write_file "$VAL" "$LOC/msg$i"
+		RVAL=$(read_file "$REM/../msg$i")
+
+		if [[ "$VAL" -ne "${RVAL%%<-*}" ]]; then
+			echo "Message $i value $RVAL doesn't match $VAL" >&2
+			exit -1
+		fi
+	done
+
+	echo "  Passed"
+}
+
+function get_number()
+{
+	KEY=$1
+
+	sed -n "s/^\(${KEY}\)[ \t]*\(0x[0-9a-fA-F]*\)\(\[p\]\)\?$/\2/p"
+}
+
+function mw_alloc()
+{
+	IDX=$1
+	LOC=$2
+	REM=$3
+
+	write_file $MW_SIZE "$LOC/mw_trans$IDX"
+
+	INB_MW=$(read_file "$LOC/mw_trans$IDX")
+	MW_ALIGNED_SIZE=$(echo "$INB_MW" | get_number "Window Size")
+	MW_DMA_ADDR=$(echo "$INB_MW" | get_number "DMA Address")
+
+	write_file "$MW_DMA_ADDR:$(($MW_ALIGNED_SIZE))" "$REM/peer_mw_trans$IDX"
+
+	if [[ $MW_SIZE -ne $MW_ALIGNED_SIZE ]]; then
+		echo "MW $IDX size aligned to $MW_ALIGNED_SIZE"
+	fi
+}
+
+function write_mw()
+{
+	split_remote $2
+
+	if [[ "$REMOTE" != "" ]]; then
+		ssh "$REMOTE" \
+			dd if=/dev/urandom "of=$VPATH" 2> /dev/null || true
+	else
+		dd if=/dev/urandom "of=$VPATH" 2> /dev/null || true
+	fi
+}
+
+function mw_check()
+{
+	IDX=$1
+	LOC=$2
+	REM=$3
+
+	write_mw "$LOC/mw$IDX"
+
+	split_remote "$LOC/mw$IDX"
+	if [[ "$REMOTE" == "" ]]; then
+		A=$VPATH
+	else
+		A=/tmp/ntb_test.$$.A
+		ssh "$REMOTE" cat "$VPATH" > "$A"
+	fi
+
+	split_remote "$REM/peer_mw$IDX"
+	if [[ "$REMOTE" == "" ]]; then
+		B=$VPATH
+	else
+		B=/tmp/ntb_test.$$.B
+		ssh "$REMOTE" cat "$VPATH" > "$B"
+	fi
+
+	cmp -n $MW_ALIGNED_SIZE "$A" "$B"
+	if [[ $? != 0 ]]; then
+		echo "Memory window $MW did not match!" >&2
+	fi
+
+	if [[ "$A" == "/tmp/*" ]]; then
+		rm "$A"
+	fi
+
+	if [[ "$B" == "/tmp/*" ]]; then
+		rm "$B"
+	fi
+}
+
+function mw_free()
+{
+	IDX=$1
+	LOC=$2
+	REM=$3
+
+	write_file "$MW_DMA_ADDR:0" "$REM/peer_mw_trans$IDX"
+
+	write_file 0 "$LOC/mw_trans$IDX"
+}
+
+function mw_test()
+{
+	LOC=$1
+	REM=$2
+
+	CNT=$(get_files_count "mw_trans" "$LOC")
+
+	for ((i = 0; i < $CNT; i++)); do
+		echo "Running mw$i tests on: $(subdirname $LOC) / " \
+		     "$(subdirname $REM)"
+
+		mw_alloc $i $LOC $REM
+
+		mw_check $i $LOC $REM
+
+		mw_free $i $LOC  $REM
+
+		echo "  Passed"
+	done
+
+}
+
+function pingpong_test()
+{
+	LOC=$1
+	REM=$2
+
+	echo "Running ping pong tests on: $(basename $LOC) / $(basename $REM)"
+
+	LOC_START=$(read_file "$LOC/count")
+	REM_START=$(read_file "$REM/count")
+
+	sleep 7
+
+	LOC_END=$(read_file "$LOC/count")
+	REM_END=$(read_file "$REM/count")
+
+	if [[ $LOC_START == $LOC_END ]] || [[ $REM_START == $REM_END ]]; then
+		echo "Ping pong counter not incrementing!" >&2
+		exit 1
+	fi
+
+	echo "  Passed"
+}
+
+function msi_test()
+{
+	LOC=$1
+	REM=$2
+
+	write_file 1 $LOC/ready
+
+	echo "Running MSI interrupt tests on: $(subdirname $LOC) / $(subdirname $REM)"
+
+	CNT=$(read_file "$LOC/count")
+	for ((i = 0; i < $CNT; i++)); do
+		START=$(read_file $REM/../irq${i}_occurrences)
+		write_file $i $LOC/trigger
+		END=$(read_file $REM/../irq${i}_occurrences)
+
+		if [[ $(($END - $START)) != 1 ]]; then
+			echo "MSI did not trigger the interrupt on the remote side!" >&2
+			exit 1
+		fi
+	done
+
+	echo "  Passed"
+}
+
+function perf_test()
+{
+	USE_DMA=$1
+
+	if [[ $USE_DMA == "1" ]]; then
+		WITH="with"
+	else
+		WITH="without"
+	fi
+
+	_modprobe ntb_perf total_order=$PERF_RUN_ORDER \
+		max_mw_size=$MAX_MW_SIZE use_dma=$USE_DMA
+
+	echo "Running local perf test $WITH DMA"
+	write_file "$LOCAL_PIDX" "$LOCAL_PERF/run"
+	echo -n "  "
+	read_file "$LOCAL_PERF/run"
+	echo "  Passed"
+
+	echo "Running remote perf test $WITH DMA"
+	write_file "$REMOTE_PIDX" "$REMOTE_PERF/run"
+	echo -n "  "
+	read_file "$REMOTE_PERF/run"
+	echo "  Passed"
+
+	_modprobe -r ntb_perf
+}
+
+function ntb_tool_tests()
+{
+	LOCAL_TOOL="$DEBUGFS/ntb_tool/$LOCAL_DEV"
+	REMOTE_TOOL="$REMOTE_HOST:$DEBUGFS/ntb_tool/$REMOTE_DEV"
+
+	echo "Starting ntb_tool tests..."
+
+	_modprobe ntb_tool
+
+	port_test "$LOCAL_TOOL" "$REMOTE_TOOL"
+
+	LOCAL_PEER_TOOL="$LOCAL_TOOL/peer$LOCAL_PIDX"
+	REMOTE_PEER_TOOL="$REMOTE_TOOL/peer$REMOTE_PIDX"
+
+	link_test "$LOCAL_PEER_TOOL" "$REMOTE_PEER_TOOL"
+	link_test "$REMOTE_PEER_TOOL" "$LOCAL_PEER_TOOL"
+
+	#Ensure the link is up on both sides before continuing
+	write_file "Y" "$LOCAL_PEER_TOOL/link_event"
+	write_file "Y" "$REMOTE_PEER_TOOL/link_event"
+
+	doorbell_test "$LOCAL_TOOL" "$REMOTE_TOOL"
+	doorbell_test "$REMOTE_TOOL" "$LOCAL_TOOL"
+
+	scratchpad_test "$LOCAL_PEER_TOOL" "$REMOTE_PEER_TOOL"
+	scratchpad_test "$REMOTE_PEER_TOOL" "$LOCAL_PEER_TOOL"
+
+	message_test "$LOCAL_PEER_TOOL" "$REMOTE_PEER_TOOL"
+	message_test "$REMOTE_PEER_TOOL" "$LOCAL_PEER_TOOL"
+
+	mw_test "$LOCAL_PEER_TOOL" "$REMOTE_PEER_TOOL"
+	mw_test "$REMOTE_PEER_TOOL" "$LOCAL_PEER_TOOL"
+
+	_modprobe -r ntb_tool
+}
+
+function ntb_pingpong_tests()
+{
+	LOCAL_PP="$DEBUGFS/ntb_pingpong/$LOCAL_DEV"
+	REMOTE_PP="$REMOTE_HOST:$DEBUGFS/ntb_pingpong/$REMOTE_DEV"
+
+	echo "Starting ntb_pingpong tests..."
+
+	_modprobe ntb_pingpong
+
+	pingpong_test $LOCAL_PP $REMOTE_PP
+
+	_modprobe -r ntb_pingpong
+}
+
+function ntb_msi_tests()
+{
+	LOCAL_MSI="$DEBUGFS/ntb_msi_test/$LOCAL_DEV"
+	REMOTE_MSI="$REMOTE_HOST:$DEBUGFS/ntb_msi_test/$REMOTE_DEV"
+
+	echo "Starting ntb_msi_test tests..."
+
+	if ! _modprobe ntb_msi_test 2> /dev/null; then
+		echo "  Not doing MSI tests seeing the module is not available."
+		return
+	fi
+
+	port_test $LOCAL_MSI $REMOTE_MSI
+
+	LOCAL_PEER="$LOCAL_MSI/peer$LOCAL_PIDX"
+	REMOTE_PEER="$REMOTE_MSI/peer$REMOTE_PIDX"
+
+	msi_test $LOCAL_PEER $REMOTE_PEER
+	msi_test $REMOTE_PEER $LOCAL_PEER
+
+	_modprobe -r ntb_msi_test
+}
+
+function ntb_perf_tests()
+{
+	LOCAL_PERF="$DEBUGFS/ntb_perf/$LOCAL_DEV"
+	REMOTE_PERF="$REMOTE_HOST:$DEBUGFS/ntb_perf/$REMOTE_DEV"
+
+	echo "Starting ntb_perf tests..."
+
+	perf_test 0
+
+	if [[ $RUN_DMA_TESTS ]]; then
+		perf_test 1
+	fi
+}
+
+function cleanup()
+{
+	set +e
+	_modprobe -r ntb_tool 2> /dev/null
+	_modprobe -r ntb_perf 2> /dev/null
+	_modprobe -r ntb_pingpong 2> /dev/null
+	_modprobe -r ntb_transport 2> /dev/null
+	_modprobe -r ntb_msi_test 2> /dev/null
+	set -e
+}
+
+cleanup
+
+if ! [[ $$DONT_CLEANUP ]]; then
+	trap cleanup EXIT
+fi
+
+if [ "$(id -u)" != "0" ]; then
+	echo "This script must be run as root" 1>&2
+	exit 1
+fi
+
+if [[ "$LIST_DEVS" == TRUE ]]; then
+	echo "Local Devices:"
+	ls -1 /sys/bus/ntb/devices
+	echo
+
+	if [[ "$REMOTE_HOST" != "" ]]; then
+		echo "Remote Devices:"
+		ssh $REMOTE_HOST ls -1 /sys/bus/ntb/devices
+	fi
+
+	exit 0
+fi
+
+if [[ "$LOCAL_DEV" == $"" ]] || [[ "$REMOTE_DEV" == $"" ]]; then
+	show_help
+	exit 1
+fi
+
+ntb_tool_tests
+echo
+ntb_pingpong_tests
+echo
+ntb_msi_tests
+echo
+ntb_perf_tests
+echo