Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 269 insertions, 0 deletions

diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh
new file mode 100755
index 000000000..21ec1966d
--- /dev/null
+++ b/tools/testing/selftests/zram/zram_lib.sh
@@ -0,0 +1,269 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2015 Oracle and/or its affiliates. All Rights Reserved.
+#
+# Author: Alexey Kodanev <alexey.kodanev@oracle.com>
+# Modified: Naresh Kamboju <naresh.kamboju@linaro.org>
+
+dev_makeswap=-1
+dev_mounted=-1
+dev_start=0
+dev_end=-1
+module_load=-1
+sys_control=-1
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+kernel_version=`uname -r | cut -d'.' -f1,2`
+kernel_major=${kernel_version%.*}
+kernel_minor=${kernel_version#*.}
+
+trap INT
+
+check_prereqs()
+{
+	local msg="skip all tests:"
+	local uid=$(id -u)
+
+	if [ $uid -ne 0 ]; then
+		echo $msg must be run as root >&2
+		exit $ksft_skip
+	fi
+}
+
+kernel_gte()
+{
+	major=${1%.*}
+	minor=${1#*.}
+
+	if [ $kernel_major -gt $major ]; then
+		return 0
+	elif [[ $kernel_major -eq $major && $kernel_minor -ge $minor ]]; then
+		return 0
+	fi
+
+	return 1
+}
+
+zram_cleanup()
+{
+	echo "zram cleanup"
+	local i=
+	for i in $(seq $dev_start $dev_makeswap); do
+		swapoff /dev/zram$i
+	done
+
+	for i in $(seq $dev_start $dev_mounted); do
+		umount /dev/zram$i
+	done
+
+	for i in $(seq $dev_start $dev_end); do
+		echo 1 > /sys/block/zram${i}/reset
+		rm -rf zram$i
+	done
+
+	if [ $sys_control -eq 1 ]; then
+		for i in $(seq $dev_start $dev_end); do
+			echo $i > /sys/class/zram-control/hot_remove
+		done
+	fi
+
+	if [ $module_load -eq 1 ]; then
+		rmmod zram > /dev/null 2>&1
+	fi
+}
+
+zram_load()
+{
+	echo "create '$dev_num' zram device(s)"
+
+	# zram module loaded, new kernel
+	if [ -d "/sys/class/zram-control" ]; then
+		echo "zram modules already loaded, kernel supports" \
+			"zram-control interface"
+		dev_start=$(ls /dev/zram* | wc -w)
+		dev_end=$(($dev_start + $dev_num - 1))
+		sys_control=1
+
+		for i in $(seq $dev_start $dev_end); do
+			cat /sys/class/zram-control/hot_add > /dev/null
+		done
+
+		echo "all zram devices (/dev/zram$dev_start~$dev_end" \
+			"successfully created"
+		return 0
+	fi
+
+	# detect old kernel or built-in
+	modprobe zram num_devices=$dev_num
+	if [ ! -d "/sys/class/zram-control" ]; then
+		if grep -q '^zram' /proc/modules; then
+			rmmod zram > /dev/null 2>&1
+			if [ $? -ne 0 ]; then
+				echo "zram module is being used on old kernel" \
+					"without zram-control interface"
+				exit $ksft_skip
+			fi
+		else
+			echo "test needs CONFIG_ZRAM=m on old kernel without" \
+				"zram-control interface"
+			exit $ksft_skip
+		fi
+		modprobe zram num_devices=$dev_num
+	fi
+
+	module_load=1
+	dev_end=$(($dev_num - 1))
+	echo "all zram devices (/dev/zram0~$dev_end) successfully created"
+}
+
+zram_max_streams()
+{
+	echo "set max_comp_streams to zram device(s)"
+
+	kernel_gte 4.7
+	if [ $? -eq 0 ]; then
+		echo "The device attribute max_comp_streams was"\
+		               "deprecated in 4.7"
+		return 0
+	fi
+
+	local i=$dev_start
+	for max_s in $zram_max_streams; do
+		local sys_path="/sys/block/zram${i}/max_comp_streams"
+		echo $max_s > $sys_path || \
+			echo "FAIL failed to set '$max_s' to $sys_path"
+		sleep 1
+		local max_streams=$(cat $sys_path)
+
+		[ "$max_s" -ne "$max_streams" ] && \
+			echo "FAIL can't set max_streams '$max_s', get $max_stream"
+
+		i=$(($i + 1))
+		echo "$sys_path = '$max_streams'"
+	done
+
+	echo "zram max streams: OK"
+}
+
+zram_compress_alg()
+{
+	echo "test that we can set compression algorithm"
+
+	local i=$dev_start
+	local algs=$(cat /sys/block/zram${i}/comp_algorithm)
+	echo "supported algs: $algs"
+
+	for alg in $zram_algs; do
+		local sys_path="/sys/block/zram${i}/comp_algorithm"
+		echo "$alg" >	$sys_path || \
+			echo "FAIL can't set '$alg' to $sys_path"
+		i=$(($i + 1))
+		echo "$sys_path = '$alg'"
+	done
+
+	echo "zram set compression algorithm: OK"
+}
+
+zram_set_disksizes()
+{
+	echo "set disk size to zram device(s)"
+	local i=$dev_start
+	for ds in $zram_sizes; do
+		local sys_path="/sys/block/zram${i}/disksize"
+		echo "$ds" >	$sys_path || \
+			echo "FAIL can't set '$ds' to $sys_path"
+
+		i=$(($i + 1))
+		echo "$sys_path = '$ds'"
+	done
+
+	echo "zram set disksizes: OK"
+}
+
+zram_set_memlimit()
+{
+	echo "set memory limit to zram device(s)"
+
+	local i=$dev_start
+	for ds in $zram_mem_limits; do
+		local sys_path="/sys/block/zram${i}/mem_limit"
+		echo "$ds" >	$sys_path || \
+			echo "FAIL can't set '$ds' to $sys_path"
+
+		i=$(($i + 1))
+		echo "$sys_path = '$ds'"
+	done
+
+	echo "zram set memory limit: OK"
+}
+
+zram_makeswap()
+{
+	echo "make swap with zram device(s)"
+	local i=$dev_start
+	for i in $(seq $dev_start $dev_end); do
+		mkswap /dev/zram$i > err.log 2>&1
+		if [ $? -ne 0 ]; then
+			cat err.log
+			echo "FAIL mkswap /dev/zram$1 failed"
+		fi
+
+		swapon /dev/zram$i > err.log 2>&1
+		if [ $? -ne 0 ]; then
+			cat err.log
+			echo "FAIL swapon /dev/zram$1 failed"
+		fi
+
+		echo "done with /dev/zram$i"
+		dev_makeswap=$i
+	done
+
+	echo "zram making zram mkswap and swapon: OK"
+}
+
+zram_swapoff()
+{
+	local i=
+	for i in $(seq $dev_start $dev_end); do
+		swapoff /dev/zram$i > err.log 2>&1
+		if [ $? -ne 0 ]; then
+			cat err.log
+			echo "FAIL swapoff /dev/zram$i failed"
+		fi
+	done
+	dev_makeswap=-1
+
+	echo "zram swapoff: OK"
+}
+
+zram_makefs()
+{
+	local i=$dev_start
+	for fs in $zram_filesystems; do
+		# if requested fs not supported default it to ext2
+		which mkfs.$fs > /dev/null 2>&1 || fs=ext2
+
+		echo "make $fs filesystem on /dev/zram$i"
+		mkfs.$fs /dev/zram$i > err.log 2>&1
+		if [ $? -ne 0 ]; then
+			cat err.log
+			echo "FAIL failed to make $fs on /dev/zram$i"
+		fi
+		i=$(($i + 1))
+		echo "zram mkfs.$fs: OK"
+	done
+}
+
+zram_mount()
+{
+	local i=0
+	for i in $(seq $dev_start $dev_end); do
+		echo "mount /dev/zram$i"
+		mkdir zram$i
+		mount /dev/zram$i zram$i > /dev/null || \
+			echo "FAIL mount /dev/zram$i failed"
+		dev_mounted=$i
+	done
+
+	echo "zram mount of zram device(s): OK"
+}