Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 268 insertions, 0 deletions

diff --git a/tools/vm/slabinfo-gnuplot.sh b/tools/vm/slabinfo-gnuplot.sh
new file mode 100644
index 000000000..873a89214
--- /dev/null
+++ b/tools/vm/slabinfo-gnuplot.sh
@@ -0,0 +1,268 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0-only
+
+# Sergey Senozhatsky, 2015
+# sergey.senozhatsky.work@gmail.com
+#
+
+
+# This program is intended to plot a `slabinfo -X' stats, collected,
+# for example, using the following command:
+#   while [ 1 ]; do slabinfo -X >> stats; sleep 1; done
+#
+# Use `slabinfo-gnuplot.sh stats' to pre-process collected records
+# and generate graphs (totals, slabs sorted by size, slabs sorted
+# by size).
+#
+# Graphs can be [individually] regenerate with different ranges and
+# size (-r %d,%d and -s %d,%d options).
+#
+# To visually compare N `totals' graphs, do
+# slabinfo-gnuplot.sh -t FILE1-totals FILE2-totals ... FILEN-totals
+#
+
+min_slab_name_size=11
+xmin=0
+xmax=0
+width=1500
+height=700
+mode=preprocess
+
+usage()
+{
+	echo "Usage: [-s W,H] [-r MIN,MAX] [-t|-l] FILE1 [FILE2 ..]"
+	echo "FILEs must contain 'slabinfo -X' samples"
+	echo "-t 			- plot totals for FILE(s)"
+	echo "-l 			- plot slabs stats for FILE(s)"
+	echo "-s %d,%d		- set image width and height"
+	echo "-r %d,%d		- use data samples from a given range"
+}
+
+check_file_exist()
+{
+	if [ ! -f "$1" ]; then
+		echo "File '$1' does not exist"
+		exit 1
+	fi
+}
+
+do_slabs_plotting()
+{
+	local file=$1
+	local out_file
+	local range="every ::$xmin"
+	local xtic=""
+	local xtic_rotate="norotate"
+	local lines=2000000
+	local wc_lines
+
+	check_file_exist "$file"
+
+	out_file=`basename "$file"`
+	if [ $xmax -ne 0 ]; then
+		range="$range::$xmax"
+		lines=$((xmax-xmin))
+	fi
+
+	wc_lines=`cat "$file" | wc -l`
+	if [ $? -ne 0 ] || [ "$wc_lines" -eq 0 ] ; then
+		wc_lines=$lines
+	fi
+
+	if [ "$wc_lines" -lt "$lines" ]; then
+		lines=$wc_lines
+	fi
+
+	if [ $((width / lines)) -gt $min_slab_name_size ]; then
+		xtic=":xtic(1)"
+		xtic_rotate=90
+	fi
+
+gnuplot -p << EOF
+#!/usr/bin/env gnuplot
+
+set terminal png enhanced size $width,$height large
+set output '$out_file.png'
+set autoscale xy
+set xlabel 'samples'
+set ylabel 'bytes'
+set style histogram columnstacked title textcolor lt -1
+set style fill solid 0.15
+set xtics rotate $xtic_rotate
+set key left above Left title reverse
+
+plot "$file" $range u 2$xtic title 'SIZE' with boxes,\
+	'' $range u 3 title 'LOSS' with boxes
+EOF
+
+	if [ $? -eq 0 ]; then
+		echo "$out_file.png"
+	fi
+}
+
+do_totals_plotting()
+{
+	local gnuplot_cmd=""
+	local range="every ::$xmin"
+	local file=""
+
+	if [ $xmax -ne 0 ]; then
+		range="$range::$xmax"
+	fi
+
+	for i in "${t_files[@]}"; do
+		check_file_exist "$i"
+
+		file="$file"`basename "$i"`
+		gnuplot_cmd="$gnuplot_cmd '$i' $range using 1 title\
+			'$i Memory usage' with lines,"
+		gnuplot_cmd="$gnuplot_cmd '' $range using 2 title \
+			'$i Loss' with lines,"
+	done
+
+gnuplot -p << EOF
+#!/usr/bin/env gnuplot
+
+set terminal png enhanced size $width,$height large
+set autoscale xy
+set output '$file.png'
+set xlabel 'samples'
+set ylabel 'bytes'
+set key left above Left title reverse
+
+plot $gnuplot_cmd
+EOF
+
+	if [ $? -eq 0 ]; then
+		echo "$file.png"
+	fi
+}
+
+do_preprocess()
+{
+	local out
+	local lines
+	local in=$1
+
+	check_file_exist "$in"
+
+	# use only 'TOP' slab (biggest memory usage or loss)
+	let lines=3
+	out=`basename "$in"`"-slabs-by-loss"
+	`cat "$in" | grep -A "$lines" 'Slabs sorted by loss' |\
+		grep -E -iv '\-\-|Name|Slabs'\
+		| awk '{print $1" "$4+$2*$3" "$4}' > "$out"`
+	if [ $? -eq 0 ]; then
+		do_slabs_plotting "$out"
+	fi
+
+	let lines=3
+	out=`basename "$in"`"-slabs-by-size"
+	`cat "$in" | grep -A "$lines" 'Slabs sorted by size' |\
+		grep -E -iv '\-\-|Name|Slabs'\
+		| awk '{print $1" "$4" "$4-$2*$3}' > "$out"`
+	if [ $? -eq 0 ]; then
+		do_slabs_plotting "$out"
+	fi
+
+	out=`basename "$in"`"-totals"
+	`cat "$in" | grep "Memory used" |\
+		awk '{print $3" "$7}' > "$out"`
+	if [ $? -eq 0 ]; then
+		t_files[0]=$out
+		do_totals_plotting
+	fi
+}
+
+parse_opts()
+{
+	local opt
+
+	while getopts "tlr::s::h" opt; do
+		case $opt in
+			t)
+				mode=totals
+				;;
+			l)
+				mode=slabs
+				;;
+			s)
+				array=(${OPTARG//,/ })
+				width=${array[0]}
+				height=${array[1]}
+				;;
+			r)
+				array=(${OPTARG//,/ })
+				xmin=${array[0]}
+				xmax=${array[1]}
+				;;
+			h)
+				usage
+				exit 0
+				;;
+			\?)
+				echo "Invalid option: -$OPTARG" >&2
+				exit 1
+				;;
+			:)
+				echo "-$OPTARG requires an argument." >&2
+				exit 1
+				;;
+		esac
+	done
+
+	return $OPTIND
+}
+
+parse_args()
+{
+	local idx=0
+	local p
+
+	for p in "$@"; do
+		case $mode in
+			preprocess)
+				files[$idx]=$p
+				idx=$idx+1
+				;;
+			totals)
+				t_files[$idx]=$p
+				idx=$idx+1
+				;;
+			slabs)
+				files[$idx]=$p
+				idx=$idx+1
+				;;
+		esac
+	done
+}
+
+parse_opts "$@"
+argstart=$?
+parse_args "${@:$argstart}"
+
+if [ ${#files[@]} -eq 0 ] && [ ${#t_files[@]} -eq 0 ]; then
+	usage
+	exit 1
+fi
+
+case $mode in
+	preprocess)
+		for i in "${files[@]}"; do
+			do_preprocess "$i"
+		done
+		;;
+	totals)
+		do_totals_plotting
+		;;
+	slabs)
+		for i in "${files[@]}"; do
+			do_slabs_plotting "$i"
+		done
+		;;
+	*)
+		echo "Unknown mode $mode" >&2
+		usage
+		exit 1
+	;;
+esac