From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../ABI/stable/sysfs-driver-firmware-zynqmp | 256 +++++++++++++++++++++ 1 file changed, 256 insertions(+) create mode 100644 Documentation/ABI/stable/sysfs-driver-firmware-zynqmp (limited to 'Documentation/ABI/stable/sysfs-driver-firmware-zynqmp') diff --git a/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp b/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp new file mode 100644 index 000000000..c3fec3c83 --- /dev/null +++ b/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp @@ -0,0 +1,256 @@ +What: /sys/devices/platform/firmware\:zynqmp-firmware/ggs* +Date: March 2020 +KernelVersion: 5.6 +Contact: "Jolly Shah" +Description: + Read/Write PMU global general storage register value, + GLOBAL_GEN_STORAGE{0:3}. + Global general storage register that can be used + by system to pass information between masters. + + The register is reset during system or power-on + resets. Three registers are used by the FSBL and + other Xilinx software products: GLOBAL_GEN_STORAGE{4:6}. + + Usage:: + + # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 + # echo > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 + + Example:: + + # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 + # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0 + +Users: Xilinx + +What: /sys/devices/platform/firmware\:zynqmp-firmware/pggs* +Date: March 2020 +KernelVersion: 5.6 +Contact: "Jolly Shah" +Description: + Read/Write PMU persistent global general storage register + value, PERS_GLOB_GEN_STORAGE{0:3}. + Persistent global general storage register that + can be used by system to pass information between + masters. + + This register is only reset by the power-on reset + and maintains its value through a system reset. + Four registers are used by the FSBL and other Xilinx + software products: PERS_GLOB_GEN_STORAGE{4:7}. + Register is reset only by a POR reset. + + Usage:: + + # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 + # echo > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 + + Example:: + + # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 + # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0 + +Users: Xilinx + +What: /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope +Date: March 2020 +KernelVersion: 5.6 +Contact: "Jolly Shah" +Description: + This sysfs interface allows to set the shutdown scope for the + next shutdown request. When the next shutdown is performed, the + platform specific portion of PSCI-system_off can use the chosen + shutdown scope. + + Following are available shutdown scopes(subtypes): + + subsystem: + Only the APU along with all of its peripherals + not used by other processing units will be + shut down. This may result in the FPD power + domain being shut down provided that no other + processing unit uses FPD peripherals or DRAM. + ps_only: + The complete PS will be shut down, including the + RPU, PMU, etc. Only the PL domain (FPGA) + remains untouched. + system: + The complete system/device is shut down. + + Usage:: + + # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope + # echo > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope + + Example:: + + # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope + # echo "subsystem" > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope + +Users: Xilinx + +What: /sys/devices/platform/firmware\:zynqmp-firmware/health_status +Date: March 2020 +KernelVersion: 5.6 +Contact: "Jolly Shah" +Description: + This sysfs interface allows to set the health status. If PMUFW + is compiled with CHECK_HEALTHY_BOOT, it will check the healthy + bit on FPD WDT expiration. If healthy bit is set by a user + application running in Linux, PMUFW will do APU only restart. If + healthy bit is not set during FPD WDT expiration, PMUFW will do + system restart. + + Usage: + + Set healthy bit:: + + # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status + + Unset healthy bit:: + + # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status + +Users: Xilinx + +What: /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id +Date: Feb 2022 +KernelVersion: 5.18 +Contact: "Ronak Jain" +Description: + This sysfs interface allows user to configure features at + runtime. The user can enable or disable features running at + firmware as well as the user can configure the parameters of + the features at runtime. The supported features are over + temperature and external watchdog. Here, the external watchdog + is completely different than the /dev/watchdog as the external + watchdog is running on the firmware and it is used to monitor + the health of firmware not APU(Linux). Also, the external + watchdog is interfaced outside of the zynqmp soc. + + The supported config ids are for the feature configuration is, + 1. PM_FEATURE_OVERTEMP_STATUS = 1, the user can enable or + disable the over temperature feature. + 2. PM_FEATURE_OVERTEMP_VALUE = 2, the user can configure the + over temperature limit in Degree Celsius. + 3. PM_FEATURE_EXTWDT_STATUS = 3, the user can enable or disable + the external watchdog feature. + 4. PM_FEATURE_EXTWDT_VALUE = 4, the user can configure the + external watchdog feature. + + Usage: + + Select over temperature config ID to enable/disable feature + # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id + + Check over temperature config ID is selected or not + # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id + The expected result is 1. + + Select over temperature config ID to configure OT limit + # echo 2 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id + + Check over temperature config ID is selected or not + # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id + The expected result is 2. + + Select external watchdog config ID to enable/disable feature + # echo 3 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id + + Check external watchdog config ID is selected or not + # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id + The expected result is 3. + + Select external watchdog config ID to configure time interval + # echo 4 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id + + Check external watchdog config ID is selected or not + # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id + The expected result is 4. + +Users: Xilinx + +What: /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value +Date: Feb 2022 +KernelVersion: 5.18 +Contact: "Ronak Jain" +Description: + This sysfs interface allows to configure features at runtime. + The user can enable or disable features running at firmware. + Also, the user can configure the parameters of the features + at runtime. The supported features are over temperature and + external watchdog. Here, the external watchdog is completely + different than the /dev/watchdog as the external watchdog is + running on the firmware and it is used to monitor the health + of firmware not APU(Linux). Also, the external watchdog is + interfaced outside of the zynqmp soc. + + By default the features are disabled in the firmware. The user + can enable features by querying appropriate config id of the + features. + + The default limit for the over temperature is 90 Degree Celsius. + The default timer interval for the external watchdog is 570ms. + + The supported config ids are for the feature configuration is, + 1. PM_FEATURE_OVERTEMP_STATUS = 1, the user can enable or + disable the over temperature feature. + 2. PM_FEATURE_OVERTEMP_VALUE = 2, the user can configure the + over temperature limit in Degree Celsius. + 3. PM_FEATURE_EXTWDT_STATUS = 3, the user can enable or disable + the external watchdog feature. + 4. PM_FEATURE_EXTWDT_VALUE = 4, the user can configure the + external watchdog feature. + + Usage: + + Enable over temperature feature + # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id + # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value + + Check whether the over temperature feature is enabled or not + # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value + The expected result is 1. + + Disable over temperature feature + # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id + # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value + + Check whether the over temperature feature is disabled or not + # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value + The expected result is 0. + + Configure over temperature limit to 50 Degree Celsius + # echo 2 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id + # echo 50 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value + + Check whether the over temperature limit is configured or not + # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value + The expected result is 50. + + Enable external watchdog feature + # echo 3 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id + # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value + + Check whether the external watchdog feature is enabled or not + # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value + The expected result is 1. + + Disable external watchdog feature + # echo 3 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id + # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value + + Check whether the external watchdog feature is disabled or not + # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value + The expected result is 0. + + Configure external watchdog timer interval to 500ms + # echo 4 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id + # echo 500 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value + + Check whether the external watchdog timer interval is configured or not + # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value + The expected result is 500. + +Users: Xilinx -- cgit v1.2.3