From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- Documentation/ABI/testing/sysfs-kernel-slab | 519 ++++++++++++++++++++++++++++ 1 file changed, 519 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-kernel-slab (limited to 'Documentation/ABI/testing/sysfs-kernel-slab') diff --git a/Documentation/ABI/testing/sysfs-kernel-slab b/Documentation/ABI/testing/sysfs-kernel-slab new file mode 100644 index 000000000..cd5fb8fa3 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-kernel-slab @@ -0,0 +1,519 @@ +What: /sys/kernel/slab +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The /sys/kernel/slab directory contains a snapshot of the + internal state of the SLUB allocator for each cache. Certain + files may be modified to change the behavior of the cache (and + any cache it aliases, if any). +Users: kernel memory tuning tools + +What: /sys/kernel/slab//aliases +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The aliases file is read-only and specifies how many caches + have merged into this cache. + +What: /sys/kernel/slab//align +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The align file is read-only and specifies the cache's object + alignment in bytes. + +What: /sys/kernel/slab//alloc_calls +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The alloc_calls file is read-only and lists the kernel code + locations from which allocations for this cache were performed. + The alloc_calls file only contains information if debugging is + enabled for that cache (see Documentation/mm/slub.rst). + +What: /sys/kernel/slab//alloc_fastpath +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The alloc_fastpath file shows how many objects have been + allocated using the fast path. It can be written to clear the + current count. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab//alloc_from_partial +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The alloc_from_partial file shows how many times a cpu slab has + been full and it has been refilled by using a slab from the list + of partially used slabs. It can be written to clear the current + count. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab//alloc_refill +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The alloc_refill file shows how many times the per-cpu freelist + was empty but there were objects available as the result of + remote cpu frees. It can be written to clear the current count. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab//alloc_slab +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The alloc_slab file is shows how many times a new slab had to + be allocated from the page allocator. It can be written to + clear the current count. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab//alloc_slowpath +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The alloc_slowpath file shows how many objects have been + allocated using the slow path because of a refill or + allocation from a partial or new slab. It can be written to + clear the current count. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab//cache_dma +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The cache_dma file is read-only and specifies whether objects + are from ZONE_DMA. + Available when CONFIG_ZONE_DMA is enabled. + +What: /sys/kernel/slab//cpu_slabs +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The cpu_slabs file is read-only and displays how many cpu slabs + are active and their NUMA locality. + +What: /sys/kernel/slab//cpuslab_flush +Date: April 2009 +KernelVersion: 2.6.31 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file cpuslab_flush shows how many times a cache's cpu slabs + have been flushed as the result of destroying or shrinking a + cache, a cpu going offline, or as the result of forcing an + allocation from a certain node. It can be written to clear the + current count. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab//ctor +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The ctor file is read-only and specifies the cache's object + constructor function, which is invoked for each object when a + new slab is allocated. + +What: /sys/kernel/slab//deactivate_empty +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The deactivate_empty file shows how many times an empty cpu slab + was deactivated. It can be written to clear the current count. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab//deactivate_full +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The deactivate_full file shows how many times a full cpu slab + was deactivated. It can be written to clear the current count. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab//deactivate_remote_frees +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The deactivate_remote_frees file shows how many times a cpu slab + has been deactivated and contained free objects that were freed + remotely. It can be written to clear the current count. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab//deactivate_to_head +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The deactivate_to_head file shows how many times a partial cpu + slab was deactivated and added to the head of its node's partial + list. It can be written to clear the current count. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab//deactivate_to_tail +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The deactivate_to_tail file shows how many times a partial cpu + slab was deactivated and added to the tail of its node's partial + list. It can be written to clear the current count. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab//destroy_by_rcu +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The destroy_by_rcu file is read-only and specifies whether + slabs (not objects) are freed by rcu. + +What: /sys/kernel/slab//free_add_partial +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The free_add_partial file shows how many times an object has + been freed in a full slab so that it had to added to its node's + partial list. It can be written to clear the current count. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab//free_calls +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The free_calls file is read-only and lists the locations of + object frees if slab debugging is enabled (see + Documentation/mm/slub.rst). + +What: /sys/kernel/slab//free_fastpath +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The free_fastpath file shows how many objects have been freed + using the fast path because it was an object from the cpu slab. + It can be written to clear the current count. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab//free_frozen +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The free_frozen file shows how many objects have been freed to + a frozen slab (i.e. a remote cpu slab). It can be written to + clear the current count. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab//free_remove_partial +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The free_remove_partial file shows how many times an object has + been freed to a now-empty slab so that it had to be removed from + its node's partial list. It can be written to clear the current + count. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab//free_slab +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The free_slab file shows how many times an empty slab has been + freed back to the page allocator. It can be written to clear + the current count. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab//free_slowpath +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The free_slowpath file shows how many objects have been freed + using the slow path (i.e. to a full or partial slab). It can + be written to clear the current count. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab//hwcache_align +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The hwcache_align file is read-only and specifies whether + objects are aligned on cachelines. + +What: /sys/kernel/slab//min_partial +Date: February 2009 +KernelVersion: 2.6.30 +Contact: Pekka Enberg , + David Rientjes +Description: + The min_partial file specifies how many empty slabs shall + remain on a node's partial list to avoid the overhead of + allocating new slabs. Such slabs may be reclaimed by utilizing + the shrink file. + +What: /sys/kernel/slab//object_size +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The object_size file is read-only and specifies the cache's + object size. + +What: /sys/kernel/slab//objects +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The objects file is read-only and displays how many objects are + active and from which nodes they are from. + +What: /sys/kernel/slab//objects_partial +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The objects_partial file is read-only and displays how many + objects are on partial slabs and from which nodes they are + from. + +What: /sys/kernel/slab//objs_per_slab +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file objs_per_slab is read-only and specifies how many + objects may be allocated from a single slab of the order + specified in /sys/kernel/slab//order. + +What: /sys/kernel/slab//order +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The order file specifies the page order at which new slabs are + allocated. It is writable and can be changed to increase the + number of objects per slab. If a slab cannot be allocated + because of fragmentation, SLUB will retry with the minimum order + possible depending on its characteristics. + + When debug_guardpage_minorder=N (N > 0) parameter is specified + (see Documentation/admin-guide/kernel-parameters.rst), the minimum possible + order is used and this sysfs entry can not be used to change + the order at run time. + +What: /sys/kernel/slab//order_fallback +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The order_fallback file shows how many times an allocation of a + new slab has not been possible at the cache's order and instead + fallen back to its minimum possible order. It can be written to + clear the current count. + + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab//partial +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The partial file is read-only and displays how long many + partial slabs there are and how long each node's list is. + +What: /sys/kernel/slab//poison +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The poison file specifies whether objects should be poisoned + when a new slab is allocated. + +What: /sys/kernel/slab//reclaim_account +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The reclaim_account file specifies whether the cache's objects + are reclaimable (and grouped by their mobility). + +What: /sys/kernel/slab//red_zone +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The red_zone file specifies whether the cache's objects are red + zoned. + +What: /sys/kernel/slab//remote_node_defrag_ratio +Date: January 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file remote_node_defrag_ratio specifies the percentage of + times SLUB will attempt to refill the cpu slab with a partial + slab from a remote node as opposed to allocating a new slab on + the local node. This reduces the amount of wasted memory over + the entire system but can be expensive. + + Available when CONFIG_NUMA is enabled. + +What: /sys/kernel/slab//sanity_checks +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The sanity_checks file specifies whether expensive checks + should be performed on free and, at minimum, enables double free + checks. Caches that enable sanity_checks cannot be merged with + caches that do not. + +What: /sys/kernel/slab//shrink +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The shrink file is used to reclaim unused slab cache + memory from a cache. Empty per-cpu or partial slabs + are freed and the partial list is sorted so the slabs + with the fewest available objects are used first. + It only accepts a value of "1" on write for shrinking + the cache. Other input values are considered invalid. + Shrinking slab caches might be expensive and can + adversely impact other running applications. So it + should be used with care. + +What: /sys/kernel/slab//slab_size +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The slab_size file is read-only and specifies the object size + with metadata (debugging information and alignment) in bytes. + +What: /sys/kernel/slab//slabs +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The slabs file is read-only and displays how long many slabs + there are (both cpu and partial) and from which nodes they are + from. + +What: /sys/kernel/slab//store_user +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The store_user file specifies whether the location of + allocation or free should be tracked for a cache. + +What: /sys/kernel/slab//total_objects +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The total_objects file is read-only and displays how many total + objects a cache has and from which nodes they are from. + +What: /sys/kernel/slab//trace +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The trace file specifies whether object allocations and frees + should be traced. + +What: /sys/kernel/slab//validate +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + Writing to the validate file causes SLUB to traverse all of its + cache's objects and check the validity of metadata. + +What: /sys/kernel/slab//usersize +Date: Jun 2017 +Contact: David Windsor +Description: + The usersize file is read-only and contains the usercopy + region size. + +What: /sys/kernel/slab//slabs_cpu_partial +Date: Aug 2011 +Contact: Christoph Lameter +Description: + This read-only file shows the number of partialli allocated + frozen slabs. + +What: /sys/kernel/slab//cpu_partial +Date: Aug 2011 +Contact: Christoph Lameter +Description: + This read-only file shows the number of per cpu partial + pages to keep around. -- cgit v1.2.3