From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- Documentation/accounting/cgroupstats.rst | 31 ++++ Documentation/accounting/delay-accounting.rst | 130 +++++++++++++++++ Documentation/accounting/index.rst | 14 ++ Documentation/accounting/psi.rst | 184 ++++++++++++++++++++++++ Documentation/accounting/taskstats-struct.rst | 199 ++++++++++++++++++++++++++ Documentation/accounting/taskstats.rst | 180 +++++++++++++++++++++++ 6 files changed, 738 insertions(+) create mode 100644 Documentation/accounting/cgroupstats.rst create mode 100644 Documentation/accounting/delay-accounting.rst create mode 100644 Documentation/accounting/index.rst create mode 100644 Documentation/accounting/psi.rst create mode 100644 Documentation/accounting/taskstats-struct.rst create mode 100644 Documentation/accounting/taskstats.rst (limited to 'Documentation/accounting') diff --git a/Documentation/accounting/cgroupstats.rst b/Documentation/accounting/cgroupstats.rst new file mode 100644 index 000000000..85186e7d4 --- /dev/null +++ b/Documentation/accounting/cgroupstats.rst @@ -0,0 +1,31 @@ +================== +Control Groupstats +================== + +Control Groupstats is inspired by the discussion at +https://lore.kernel.org/r/461CF883.2030308@sw.ru and implements per cgroup statistics as +suggested by Andrew Morton in https://lore.kernel.org/r/20070411114927.1277d7c9.akpm@linux-foundation.org. + +Per cgroup statistics infrastructure re-uses code from the taskstats +interface. A new set of cgroup operations are registered with commands +and attributes specific to cgroups. It should be very easy to +extend per cgroup statistics, by adding members to the cgroupstats +structure. + +The current model for cgroupstats is a pull, a push model (to post +statistics on interesting events), should be very easy to add. Currently +user space requests for statistics by passing the cgroup path. +Statistics about the state of all the tasks in the cgroup is returned to +user space. + +NOTE: We currently rely on delay accounting for extracting information +about tasks blocked on I/O. If CONFIG_TASK_DELAY_ACCT is disabled, this +information will not be available. + +To extract cgroup statistics a utility very similar to getdelays.c +has been developed, the sample output of the utility is shown below:: + + ~/balbir/cgroupstats # ./getdelays -C "/sys/fs/cgroup/a" + sleeping 1, blocked 0, running 1, stopped 0, uninterruptible 0 + ~/balbir/cgroupstats # ./getdelays -C "/sys/fs/cgroup" + sleeping 155, blocked 0, running 1, stopped 0, uninterruptible 2 diff --git a/Documentation/accounting/delay-accounting.rst b/Documentation/accounting/delay-accounting.rst new file mode 100644 index 000000000..7103b62ba --- /dev/null +++ b/Documentation/accounting/delay-accounting.rst @@ -0,0 +1,130 @@ +================ +Delay accounting +================ + +Tasks encounter delays in execution when they wait +for some kernel resource to become available e.g. a +runnable task may wait for a free CPU to run on. + +The per-task delay accounting functionality measures +the delays experienced by a task while + +a) waiting for a CPU (while being runnable) +b) completion of synchronous block I/O initiated by the task +c) swapping in pages +d) memory reclaim +e) thrashing +f) direct compact +g) write-protect copy + +and makes these statistics available to userspace through +the taskstats interface. + +Such delays provide feedback for setting a task's cpu priority, +io priority and rss limit values appropriately. Long delays for +important tasks could be a trigger for raising its corresponding priority. + +The functionality, through its use of the taskstats interface, also provides +delay statistics aggregated for all tasks (or threads) belonging to a +thread group (corresponding to a traditional Unix process). This is a commonly +needed aggregation that is more efficiently done by the kernel. + +Userspace utilities, particularly resource management applications, can also +aggregate delay statistics into arbitrary groups. To enable this, delay +statistics of a task are available both during its lifetime as well as on its +exit, ensuring continuous and complete monitoring can be done. + + +Interface +--------- + +Delay accounting uses the taskstats interface which is described +in detail in a separate document in this directory. Taskstats returns a +generic data structure to userspace corresponding to per-pid and per-tgid +statistics. The delay accounting functionality populates specific fields of +this structure. See + + include/uapi/linux/taskstats.h + +for a description of the fields pertaining to delay accounting. +It will generally be in the form of counters returning the cumulative +delay seen for cpu, sync block I/O, swapin, memory reclaim, thrash page +cache, direct compact, write-protect copy etc. + +Taking the difference of two successive readings of a given +counter (say cpu_delay_total) for a task will give the delay +experienced by the task waiting for the corresponding resource +in that interval. + +When a task exits, records containing the per-task statistics +are sent to userspace without requiring a command. If it is the last exiting +task of a thread group, the per-tgid statistics are also sent. More details +are given in the taskstats interface description. + +The getdelays.c userspace utility in tools/accounting directory allows simple +commands to be run and the corresponding delay statistics to be displayed. It +also serves as an example of using the taskstats interface. + +Usage +----- + +Compile the kernel with:: + + CONFIG_TASK_DELAY_ACCT=y + CONFIG_TASKSTATS=y + +Delay accounting is disabled by default at boot up. +To enable, add:: + + delayacct + +to the kernel boot options. The rest of the instructions below assume this has +been done. Alternatively, use sysctl kernel.task_delayacct to switch the state +at runtime. Note however that only tasks started after enabling it will have +delayacct information. + +After the system has booted up, use a utility +similar to getdelays.c to access the delays +seen by a given task or a task group (tgid). +The utility also allows a given command to be +executed and the corresponding delays to be +seen. + +General format of the getdelays command:: + + getdelays [-dilv] [-t tgid] [-p pid] + +Get delays, since system boot, for pid 10:: + + # ./getdelays -d -p 10 + (output similar to next case) + +Get sum of delays, since system boot, for all pids with tgid 5:: + + # ./getdelays -d -t 5 + print delayacct stats ON + TGID 5 + + + CPU count real total virtual total delay total delay average + 8 7000000 6872122 3382277 0.423ms + IO count delay total delay average + 0 0 0ms + SWAP count delay total delay average + 0 0 0ms + RECLAIM count delay total delay average + 0 0 0ms + THRASHING count delay total delay average + 0 0 0ms + COMPACT count delay total delay average + 0 0 0ms + WPCOPY count delay total delay average + 0 0 0ms + +Get IO accounting for pid 1, it works only with -p:: + + # ./getdelays -i -p 1 + printing IO accounting + linuxrc: read=65536, write=0, cancelled_write=0 + +The above command can be used with -v to get more debug information. diff --git a/Documentation/accounting/index.rst b/Documentation/accounting/index.rst new file mode 100644 index 000000000..9369d8bf3 --- /dev/null +++ b/Documentation/accounting/index.rst @@ -0,0 +1,14 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========== +Accounting +========== + +.. toctree:: + :maxdepth: 1 + + cgroupstats + delay-accounting + psi + taskstats + taskstats-struct diff --git a/Documentation/accounting/psi.rst b/Documentation/accounting/psi.rst new file mode 100644 index 000000000..5e40b3f43 --- /dev/null +++ b/Documentation/accounting/psi.rst @@ -0,0 +1,184 @@ +.. _psi: + +================================ +PSI - Pressure Stall Information +================================ + +:Date: April, 2018 +:Author: Johannes Weiner + +When CPU, memory or IO devices are contended, workloads experience +latency spikes, throughput losses, and run the risk of OOM kills. + +Without an accurate measure of such contention, users are forced to +either play it safe and under-utilize their hardware resources, or +roll the dice and frequently suffer the disruptions resulting from +excessive overcommit. + +The psi feature identifies and quantifies the disruptions caused by +such resource crunches and the time impact it has on complex workloads +or even entire systems. + +Having an accurate measure of productivity losses caused by resource +scarcity aids users in sizing workloads to hardware--or provisioning +hardware according to workload demand. + +As psi aggregates this information in realtime, systems can be managed +dynamically using techniques such as load shedding, migrating jobs to +other systems or data centers, or strategically pausing or killing low +priority or restartable batch jobs. + +This allows maximizing hardware utilization without sacrificing +workload health or risking major disruptions such as OOM kills. + +Pressure interface +================== + +Pressure information for each resource is exported through the +respective file in /proc/pressure/ -- cpu, memory, and io. + +The format is as such:: + + some avg10=0.00 avg60=0.00 avg300=0.00 total=0 + full avg10=0.00 avg60=0.00 avg300=0.00 total=0 + +The "some" line indicates the share of time in which at least some +tasks are stalled on a given resource. + +The "full" line indicates the share of time in which all non-idle +tasks are stalled on a given resource simultaneously. In this state +actual CPU cycles are going to waste, and a workload that spends +extended time in this state is considered to be thrashing. This has +severe impact on performance, and it's useful to distinguish this +situation from a state where some tasks are stalled but the CPU is +still doing productive work. As such, time spent in this subset of the +stall state is tracked separately and exported in the "full" averages. + +CPU full is undefined at the system level, but has been reported +since 5.13, so it is set to zero for backward compatibility. + +The ratios (in %) are tracked as recent trends over ten, sixty, and +three hundred second windows, which gives insight into short term events +as well as medium and long term trends. The total absolute stall time +(in us) is tracked and exported as well, to allow detection of latency +spikes which wouldn't necessarily make a dent in the time averages, +or to average trends over custom time frames. + +Monitoring for pressure thresholds +================================== + +Users can register triggers and use poll() to be woken up when resource +pressure exceeds certain thresholds. + +A trigger describes the maximum cumulative stall time over a specific +time window, e.g. 100ms of total stall time within any 500ms window to +generate a wakeup event. + +To register a trigger user has to open psi interface file under +/proc/pressure/ representing the resource to be monitored and write the +desired threshold and time window. The open file descriptor should be +used to wait for trigger events using select(), poll() or epoll(). +The following format is used:: + +