From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- Documentation/admin-guide/README.rst | 339 +++++++++++++++++++++++++++++++++++ 1 file changed, 339 insertions(+) create mode 100644 Documentation/admin-guide/README.rst (limited to 'Documentation/admin-guide/README.rst') diff --git a/Documentation/admin-guide/README.rst b/Documentation/admin-guide/README.rst new file mode 100644 index 000000000..9a969c015 --- /dev/null +++ b/Documentation/admin-guide/README.rst @@ -0,0 +1,339 @@ +.. _readme: + +Linux kernel release 6.x +============================================= + +These are the release notes for Linux version 6. Read them carefully, +as they tell you what this is all about, explain how to install the +kernel, and what to do if something goes wrong. + +What is Linux? +-------------- + + Linux is a clone of the operating system Unix, written from scratch by + Linus Torvalds with assistance from a loosely-knit team of hackers across + the Net. It aims towards POSIX and Single UNIX Specification compliance. + + It has all the features you would expect in a modern fully-fledged Unix, + including true multitasking, virtual memory, shared libraries, demand + loading, shared copy-on-write executables, proper memory management, + and multistack networking including IPv4 and IPv6. + + It is distributed under the GNU General Public License v2 - see the + accompanying COPYING file for more details. + +On what hardware does it run? +----------------------------- + + Although originally developed first for 32-bit x86-based PCs (386 or higher), + today Linux also runs on (at least) the Compaq Alpha AXP, Sun SPARC and + UltraSPARC, Motorola 68000, PowerPC, PowerPC64, ARM, Hitachi SuperH, Cell, + IBM S/390, MIPS, HP PA-RISC, Intel IA-64, DEC VAX, AMD x86-64 Xtensa, and + ARC architectures. + + Linux is easily portable to most general-purpose 32- or 64-bit architectures + as long as they have a paged memory management unit (PMMU) and a port of the + GNU C compiler (gcc) (part of The GNU Compiler Collection, GCC). Linux has + also been ported to a number of architectures without a PMMU, although + functionality is then obviously somewhat limited. + Linux has also been ported to itself. You can now run the kernel as a + userspace application - this is called UserMode Linux (UML). + +Documentation +------------- + + - There is a lot of documentation available both in electronic form on + the Internet and in books, both Linux-specific and pertaining to + general UNIX questions. I'd recommend looking into the documentation + subdirectories on any Linux FTP site for the LDP (Linux Documentation + Project) books. This README is not meant to be documentation on the + system: there are much better sources available. + + - There are various README files in the Documentation/ subdirectory: + these typically contain kernel-specific installation notes for some + drivers for example. Please read the + :ref:`Documentation/process/changes.rst ` file, as it + contains information about the problems, which may result by upgrading + your kernel. + +Installing the kernel source +---------------------------- + + - If you install the full sources, put the kernel tarball in a + directory where you have permissions (e.g. your home directory) and + unpack it:: + + xz -cd linux-6.x.tar.xz | tar xvf - + + Replace "X" with the version number of the latest kernel. + + Do NOT use the /usr/src/linux area! This area has a (usually + incomplete) set of kernel headers that are used by the library header + files. They should match the library, and not get messed up by + whatever the kernel-du-jour happens to be. + + - You can also upgrade between 6.x releases by patching. Patches are + distributed in the xz format. To install by patching, get all the + newer patch files, enter the top level directory of the kernel source + (linux-6.x) and execute:: + + xz -cd ../patch-6.x.xz | patch -p1 + + Replace "x" for all versions bigger than the version "x" of your current + source tree, **in_order**, and you should be ok. You may want to remove + the backup files (some-file-name~ or some-file-name.orig), and make sure + that there are no failed patches (some-file-name# or some-file-name.rej). + If there are, either you or I have made a mistake. + + Unlike patches for the 6.x kernels, patches for the 6.x.y kernels + (also known as the -stable kernels) are not incremental but instead apply + directly to the base 6.x kernel. For example, if your base kernel is 6.0 + and you want to apply the 6.0.3 patch, you must not first apply the 6.0.1 + and 6.0.2 patches. Similarly, if you are running kernel version 6.0.2 and + want to jump to 6.0.3, you must first reverse the 6.0.2 patch (that is, + patch -R) **before** applying the 6.0.3 patch. You can read more on this in + :ref:`Documentation/process/applying-patches.rst `. + + Alternatively, the script patch-kernel can be used to automate this + process. It determines the current kernel version and applies any + patches found:: + + linux/scripts/patch-kernel linux + + The first argument in the command above is the location of the + kernel source. Patches are applied from the current directory, but + an alternative directory can be specified as the second argument. + + - Make sure you have no stale .o files and dependencies lying around:: + + cd linux + make mrproper + + You should now have the sources correctly installed. + +Software requirements +--------------------- + + Compiling and running the 6.x kernels requires up-to-date + versions of various software packages. Consult + :ref:`Documentation/process/changes.rst ` for the minimum version numbers + required and how to get updates for these packages. Beware that using + excessively old versions of these packages can cause indirect + errors that are very difficult to track down, so don't assume that + you can just update packages when obvious problems arise during + build or operation. + +Build directory for the kernel +------------------------------ + + When compiling the kernel, all output files will per default be + stored together with the kernel source code. + Using the option ``make O=output/dir`` allows you to specify an alternate + place for the output files (including .config). + Example:: + + kernel source code: /usr/src/linux-6.x + build directory: /home/name/build/kernel + + To configure and build the kernel, use:: + + cd /usr/src/linux-6.x + make O=/home/name/build/kernel menuconfig + make O=/home/name/build/kernel + sudo make O=/home/name/build/kernel modules_install install + + Please note: If the ``O=output/dir`` option is used, then it must be + used for all invocations of make. + +Configuring the kernel +---------------------- + + Do not skip this step even if you are only upgrading one minor + version. New configuration options are added in each release, and + odd problems will turn up if the configuration files are not set up + as expected. If you want to carry your existing configuration to a + new version with minimal work, use ``make oldconfig``, which will + only ask you for the answers to new questions. + + - Alternative configuration commands are:: + + "make config" Plain text interface. + + "make menuconfig" Text based color menus, radiolists & dialogs. + + "make nconfig" Enhanced text based color menus. + + "make xconfig" Qt based configuration tool. + + "make gconfig" GTK+ based configuration tool. + + "make oldconfig" Default all questions based on the contents of + your existing ./.config file and asking about + new config symbols. + + "make olddefconfig" + Like above, but sets new symbols to their default + values without prompting. + + "make defconfig" Create a ./.config file by using the default + symbol values from either arch/$ARCH/defconfig + or arch/$ARCH/configs/${PLATFORM}_defconfig, + depending on the architecture. + + "make ${PLATFORM}_defconfig" + Create a ./.config file by using the default + symbol values from + arch/$ARCH/configs/${PLATFORM}_defconfig. + Use "make help" to get a list of all available + platforms of your architecture. + + "make allyesconfig" + Create a ./.config file by setting symbol + values to 'y' as much as possible. + + "make allmodconfig" + Create a ./.config file by setting symbol + values to 'm' as much as possible. + + "make allnoconfig" Create a ./.config file by setting symbol + values to 'n' as much as possible. + + "make randconfig" Create a ./.config file by setting symbol + values to random values. + + "make localmodconfig" Create a config based on current config and + loaded modules (lsmod). Disables any module + option that is not needed for the loaded modules. + + To create a localmodconfig for another machine, + store the lsmod of that machine into a file + and pass it in as a LSMOD parameter. + + Also, you can preserve modules in certain folders + or kconfig files by specifying their paths in + parameter LMC_KEEP. + + target$ lsmod > /tmp/mylsmod + target$ scp /tmp/mylsmod host:/tmp + + host$ make LSMOD=/tmp/mylsmod \ + LMC_KEEP="drivers/usb:drivers/gpu:fs" \ + localmodconfig + + The above also works when cross compiling. + + "make localyesconfig" Similar to localmodconfig, except it will convert + all module options to built in (=y) options. You can + also preserve modules by LMC_KEEP. + + "make kvm_guest.config" Enable additional options for kvm guest kernel + support. + + "make xen.config" Enable additional options for xen dom0 guest kernel + support. + + "make tinyconfig" Configure the tiniest possible kernel. + + You can find more information on using the Linux kernel config tools + in Documentation/kbuild/kconfig.rst. + + - NOTES on ``make config``: + + - Having unnecessary drivers will make the kernel bigger, and can + under some circumstances lead to problems: probing for a + nonexistent controller card may confuse your other controllers. + + - A kernel with math-emulation compiled in will still use the + coprocessor if one is present: the math emulation will just + never get used in that case. The kernel will be slightly larger, + but will work on different machines regardless of whether they + have a math coprocessor or not. + + - The "kernel hacking" configuration details usually result in a + bigger or slower kernel (or both), and can even make the kernel + less stable by configuring some routines to actively try to + break bad code to find kernel problems (kmalloc()). Thus you + should probably answer 'n' to the questions for "development", + "experimental", or "debugging" features. + +Compiling the kernel +-------------------- + + - Make sure you have at least gcc 5.1 available. + For more information, refer to :ref:`Documentation/process/changes.rst `. + + - Do a ``make`` to create a compressed kernel image. It is also + possible to do ``make install`` if you have lilo installed to suit the + kernel makefiles, but you may want to check your particular lilo setup first. + + To do the actual install, you have to be root, but none of the normal + build should require that. Don't take the name of root in vain. + + - If you configured any of the parts of the kernel as ``modules``, you + will also have to do ``make modules_install``. + + - Verbose kernel compile/build output: + + Normally, the kernel build system runs in a fairly quiet mode (but not + totally silent). However, sometimes you or other kernel developers need + to see compile, link, or other commands exactly as they are executed. + For this, use "verbose" build mode. This is done by passing + ``V=1`` to the ``make`` command, e.g.:: + + make V=1 all + + To have the build system also tell the reason for the rebuild of each + target, use ``V=2``. The default is ``V=0``. + + - Keep a backup kernel handy in case something goes wrong. This is + especially true for the development releases, since each new release + contains new code which has not been debugged. Make sure you keep a + backup of the modules corresponding to that kernel, as well. If you + are installing a new kernel with the same version number as your + working kernel, make a backup of your modules directory before you + do a ``make modules_install``. + + Alternatively, before compiling, use the kernel config option + "LOCALVERSION" to append a unique suffix to the regular kernel version. + LOCALVERSION can be set in the "General Setup" menu. + + - In order to boot your new kernel, you'll need to copy the kernel + image (e.g. .../linux/arch/x86/boot/bzImage after compilation) + to the place where your regular bootable kernel is found. + + - Booting a kernel directly from a floppy without the assistance of a + bootloader such as LILO, is no longer supported. + + If you boot Linux from the hard drive, chances are you use LILO, which + uses the kernel image as specified in the file /etc/lilo.conf. The + kernel image file is usually /vmlinuz, /boot/vmlinuz, /bzImage or + /boot/bzImage. To use the new kernel, save a copy of the old image + and copy the new image over the old one. Then, you MUST RERUN LILO + to update the loading map! If you don't, you won't be able to boot + the new kernel image. + + Reinstalling LILO is usually a matter of running /sbin/lilo. + You may wish to edit /etc/lilo.conf to specify an entry for your + old kernel image (say, /vmlinux.old) in case the new one does not + work. See the LILO docs for more information. + + After reinstalling LILO, you should be all set. Shutdown the system, + reboot, and enjoy! + + If you ever need to change the default root device, video mode, + etc. in the kernel image, use your bootloader's boot options + where appropriate. No need to recompile the kernel to change + these parameters. + + - Reboot with the new kernel and enjoy. + +If something goes wrong +----------------------- + +If you have problems that seem to be due to kernel bugs, please follow the +instructions at 'Documentation/admin-guide/reporting-issues.rst'. + +Hints on understanding kernel bug reports are in +'Documentation/admin-guide/bug-hunting.rst'. More on debugging the kernel +with gdb is in 'Documentation/dev-tools/gdb-kernel-debugging.rst' and +'Documentation/dev-tools/kgdb.rst'. -- cgit v1.2.3