From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../admin-guide/device-mapper/cache-policies.rst | 131 +++++++++++++++++++++ 1 file changed, 131 insertions(+) create mode 100644 Documentation/admin-guide/device-mapper/cache-policies.rst (limited to 'Documentation/admin-guide/device-mapper/cache-policies.rst') diff --git a/Documentation/admin-guide/device-mapper/cache-policies.rst b/Documentation/admin-guide/device-mapper/cache-policies.rst new file mode 100644 index 000000000..b17fe352f --- /dev/null +++ b/Documentation/admin-guide/device-mapper/cache-policies.rst @@ -0,0 +1,131 @@ +============================= +Guidance for writing policies +============================= + +Try to keep transactionality out of it. The core is careful to +avoid asking about anything that is migrating. This is a pain, but +makes it easier to write the policies. + +Mappings are loaded into the policy at construction time. + +Every bio that is mapped by the target is referred to the policy. +The policy can return a simple HIT or MISS or issue a migration. + +Currently there's no way for the policy to issue background work, +e.g. to start writing back dirty blocks that are going to be evicted +soon. + +Because we map bios, rather than requests it's easy for the policy +to get fooled by many small bios. For this reason the core target +issues periodic ticks to the policy. It's suggested that the policy +doesn't update states (eg, hit counts) for a block more than once +for each tick. The core ticks by watching bios complete, and so +trying to see when the io scheduler has let the ios run. + + +Overview of supplied cache replacement policies +=============================================== + +multiqueue (mq) +--------------- + +This policy is now an alias for smq (see below). + +The following tunables are accepted, but have no effect:: + + 'sequential_threshold <#nr_sequential_ios>' + 'random_threshold <#nr_random_ios>' + 'read_promote_adjustment ' + 'write_promote_adjustment ' + 'discard_promote_adjustment ' + +Stochastic multiqueue (smq) +--------------------------- + +This policy is the default. + +The stochastic multi-queue (smq) policy addresses some of the problems +with the multiqueue (mq) policy. + +The smq policy (vs mq) offers the promise of less memory utilization, +improved performance and increased adaptability in the face of changing +workloads. smq also does not have any cumbersome tuning knobs. + +Users may switch from "mq" to "smq" simply by appropriately reloading a +DM table that is using the cache target. Doing so will cause all of the +mq policy's hints to be dropped. Also, performance of the cache may +degrade slightly until smq recalculates the origin device's hotspots +that should be cached. + +Memory usage +^^^^^^^^^^^^ + +The mq policy used a lot of memory; 88 bytes per cache block on a 64 +bit machine. + +smq uses 28bit indexes to implement its data structures rather than +pointers. It avoids storing an explicit hit count for each block. It +has a 'hotspot' queue, rather than a pre-cache, which uses a quarter of +the entries (each hotspot block covers a larger area than a single +cache block). + +All this means smq uses ~25bytes per cache block. Still a lot of +memory, but a substantial improvement nontheless. + +Level balancing +^^^^^^^^^^^^^^^ + +mq placed entries in different levels of the multiqueue structures +based on their hit count (~ln(hit count)). This meant the bottom +levels generally had the most entries, and the top ones had very +few. Having unbalanced levels like this reduced the efficacy of the +multiqueue. + +smq does not maintain a hit count, instead it swaps hit entries with +the least recently used entry from the level above. The overall +ordering being a side effect of this stochastic process. With this +scheme we can decide how many entries occupy each multiqueue level, +resulting in better promotion/demotion decisions. + +Adaptability: +The mq policy maintained a hit count for each cache block. For a +different block to get promoted to the cache its hit count has to +exceed the lowest currently in the cache. This meant it could take a +long time for the cache to adapt between varying IO patterns. + +smq doesn't maintain hit counts, so a lot of this problem just goes +away. In addition it tracks performance of the hotspot queue, which +is used to decide which blocks to promote. If the hotspot queue is +performing badly then it starts moving entries more quickly between +levels. This lets it adapt to new IO patterns very quickly. + +Performance +^^^^^^^^^^^ + +Testing smq shows substantially better performance than mq. + +cleaner +------- + +The cleaner writes back all dirty blocks in a cache to decommission it. + +Examples +======== + +The syntax for a table is:: + + cache + <#feature_args> []* + <#policy_args> []* + +The syntax to send a message using the dmsetup command is:: + + dmsetup message 0 sequential_threshold 1024 + dmsetup message 0 random_threshold 8 + +Using dmsetup:: + + dmsetup create blah --table "0 268435456 cache /dev/sdb /dev/sdc \ + /dev/sdd 512 0 mq 4 sequential_threshold 1024 random_threshold 8" + creates a 128GB large mapped device named 'blah' with the + sequential threshold set to 1024 and the random_threshold set to 8. -- cgit v1.2.3