From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- Documentation/admin-guide/hw-vuln/mds.rst | 311 ++++++++++++++++++++++++++++++ 1 file changed, 311 insertions(+) create mode 100644 Documentation/admin-guide/hw-vuln/mds.rst (limited to 'Documentation/admin-guide/hw-vuln/mds.rst') diff --git a/Documentation/admin-guide/hw-vuln/mds.rst b/Documentation/admin-guide/hw-vuln/mds.rst new file mode 100644 index 000000000..2d19c9f4c --- /dev/null +++ b/Documentation/admin-guide/hw-vuln/mds.rst @@ -0,0 +1,311 @@ +MDS - Microarchitectural Data Sampling +====================================== + +Microarchitectural Data Sampling is a hardware vulnerability which allows +unprivileged speculative access to data which is available in various CPU +internal buffers. + +Affected processors +------------------- + +This vulnerability affects a wide range of Intel processors. The +vulnerability is not present on: + + - Processors from AMD, Centaur and other non Intel vendors + + - Older processor models, where the CPU family is < 6 + + - Some Atoms (Bonnell, Saltwell, Goldmont, GoldmontPlus) + + - Intel processors which have the ARCH_CAP_MDS_NO bit set in the + IA32_ARCH_CAPABILITIES MSR. + +Whether a processor is affected or not can be read out from the MDS +vulnerability file in sysfs. See :ref:`mds_sys_info`. + +Not all processors are affected by all variants of MDS, but the mitigation +is identical for all of them so the kernel treats them as a single +vulnerability. + +Related CVEs +------------ + +The following CVE entries are related to the MDS vulnerability: + + ============== ===== =================================================== + CVE-2018-12126 MSBDS Microarchitectural Store Buffer Data Sampling + CVE-2018-12130 MFBDS Microarchitectural Fill Buffer Data Sampling + CVE-2018-12127 MLPDS Microarchitectural Load Port Data Sampling + CVE-2019-11091 MDSUM Microarchitectural Data Sampling Uncacheable Memory + ============== ===== =================================================== + +Problem +------- + +When performing store, load, L1 refill operations, processors write data +into temporary microarchitectural structures (buffers). The data in the +buffer can be forwarded to load operations as an optimization. + +Under certain conditions, usually a fault/assist caused by a load +operation, data unrelated to the load memory address can be speculatively +forwarded from the buffers. Because the load operation causes a fault or +assist and its result will be discarded, the forwarded data will not cause +incorrect program execution or state changes. But a malicious operation +may be able to forward this speculative data to a disclosure gadget which +allows in turn to infer the value via a cache side channel attack. + +Because the buffers are potentially shared between Hyper-Threads cross +Hyper-Thread attacks are possible. + +Deeper technical information is available in the MDS specific x86 +architecture section: :ref:`Documentation/x86/mds.rst `. + + +Attack scenarios +---------------- + +Attacks against the MDS vulnerabilities can be mounted from malicious non +priviledged user space applications running on hosts or guest. Malicious +guest OSes can obviously mount attacks as well. + +Contrary to other speculation based vulnerabilities the MDS vulnerability +does not allow the attacker to control the memory target address. As a +consequence the attacks are purely sampling based, but as demonstrated with +the TLBleed attack samples can be postprocessed successfully. + +Web-Browsers +^^^^^^^^^^^^ + + It's unclear whether attacks through Web-Browsers are possible at + all. The exploitation through Java-Script is considered very unlikely, + but other widely used web technologies like Webassembly could possibly be + abused. + + +.. _mds_sys_info: + +MDS system information +----------------------- + +The Linux kernel provides a sysfs interface to enumerate the current MDS +status of the system: whether the system is vulnerable, and which +mitigations are active. The relevant sysfs file is: + +/sys/devices/system/cpu/vulnerabilities/mds + +The possible values in this file are: + + .. list-table:: + + * - 'Not affected' + - The processor is not vulnerable + * - 'Vulnerable' + - The processor is vulnerable, but no mitigation enabled + * - 'Vulnerable: Clear CPU buffers attempted, no microcode' + - The processor is vulnerable but microcode is not updated. + + The mitigation is enabled on a best effort basis. See :ref:`vmwerv` + * - 'Mitigation: Clear CPU buffers' + - The processor is vulnerable and the CPU buffer clearing mitigation is + enabled. + +If the processor is vulnerable then the following information is appended +to the above information: + + ======================== ============================================ + 'SMT vulnerable' SMT is enabled + 'SMT mitigated' SMT is enabled and mitigated + 'SMT disabled' SMT is disabled + 'SMT Host state unknown' Kernel runs in a VM, Host SMT state unknown + ======================== ============================================ + +.. _vmwerv: + +Best effort mitigation mode +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + If the processor is vulnerable, but the availability of the microcode based + mitigation mechanism is not advertised via CPUID the kernel selects a best + effort mitigation mode. This mode invokes the mitigation instructions + without a guarantee that they clear the CPU buffers. + + This is done to address virtualization scenarios where the host has the + microcode update applied, but the hypervisor is not yet updated to expose + the CPUID to the guest. If the host has updated microcode the protection + takes effect otherwise a few cpu cycles are wasted pointlessly. + + The state in the mds sysfs file reflects this situation accordingly. + + +Mitigation mechanism +------------------------- + +The kernel detects the affected CPUs and the presence of the microcode +which is required. + +If a CPU is affected and the microcode is available, then the kernel +enables the mitigation by default. The mitigation can be controlled at boot +time via a kernel command line option. See +:ref:`mds_mitigation_control_command_line`. + +.. _cpu_buffer_clear: + +CPU buffer clearing +^^^^^^^^^^^^^^^^^^^ + + The mitigation for MDS clears the affected CPU buffers on return to user + space and when entering a guest. + + If SMT is enabled it also clears the buffers on idle entry when the CPU + is only affected by MSBDS and not any other MDS variant, because the + other variants cannot be protected against cross Hyper-Thread attacks. + + For CPUs which are only affected by MSBDS the user space, guest and idle + transition mitigations are sufficient and SMT is not affected. + +.. _virt_mechanism: + +Virtualization mitigation +^^^^^^^^^^^^^^^^^^^^^^^^^ + + The protection for host to guest transition depends on the L1TF + vulnerability of the CPU: + + - CPU is affected by L1TF: + + If the L1D flush mitigation is enabled and up to date microcode is + available, the L1D flush mitigation is automatically protecting the + guest transition. + + If the L1D flush mitigation is disabled then the MDS mitigation is + invoked explicit when the host MDS mitigation is enabled. + + For details on L1TF and virtualization see: + :ref:`Documentation/admin-guide/hw-vuln//l1tf.rst `. + + - CPU is not affected by L1TF: + + CPU buffers are flushed before entering the guest when the host MDS + mitigation is enabled. + + The resulting MDS protection matrix for the host to guest transition: + + ============ ===== ============= ============ ================= + L1TF MDS VMX-L1FLUSH Host MDS MDS-State + + Don't care No Don't care N/A Not affected + + Yes Yes Disabled Off Vulnerable + + Yes Yes Disabled Full Mitigated + + Yes Yes Enabled Don't care Mitigated + + No Yes N/A Off Vulnerable + + No Yes N/A Full Mitigated + ============ ===== ============= ============ ================= + + This only covers the host to guest transition, i.e. prevents leakage from + host to guest, but does not protect the guest internally. Guests need to + have their own protections. + +.. _xeon_phi: + +XEON PHI specific considerations +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + The XEON PHI processor family is affected by MSBDS which can be exploited + cross Hyper-Threads when entering idle states. Some XEON PHI variants allow + to use MWAIT in user space (Ring 3) which opens an potential attack vector + for malicious user space. The exposure can be disabled on the kernel + command line with the 'ring3mwait=disable' command line option. + + XEON PHI is not affected by the other MDS variants and MSBDS is mitigated + before the CPU enters a idle state. As XEON PHI is not affected by L1TF + either disabling SMT is not required for full protection. + +.. _mds_smt_control: + +SMT control +^^^^^^^^^^^ + + All MDS variants except MSBDS can be attacked cross Hyper-Threads. That + means on CPUs which are affected by MFBDS or MLPDS it is necessary to + disable SMT for full protection. These are most of the affected CPUs; the + exception is XEON PHI, see :ref:`xeon_phi`. + + Disabling SMT can have a significant performance impact, but the impact + depends on the type of workloads. + + See the relevant chapter in the L1TF mitigation documentation for details: + :ref:`Documentation/admin-guide/hw-vuln/l1tf.rst `. + + +.. _mds_mitigation_control_command_line: + +Mitigation control on the kernel command line +--------------------------------------------- + +The kernel command line allows to control the MDS mitigations at boot +time with the option "mds=". The valid arguments for this option are: + + ============ ============================================================= + full If the CPU is vulnerable, enable all available mitigations + for the MDS vulnerability, CPU buffer clearing on exit to + userspace and when entering a VM. Idle transitions are + protected as well if SMT is enabled. + + It does not automatically disable SMT. + + full,nosmt The same as mds=full, with SMT disabled on vulnerable + CPUs. This is the complete mitigation. + + off Disables MDS mitigations completely. + + ============ ============================================================= + +Not specifying this option is equivalent to "mds=full". For processors +that are affected by both TAA (TSX Asynchronous Abort) and MDS, +specifying just "mds=off" without an accompanying "tsx_async_abort=off" +will have no effect as the same mitigation is used for both +vulnerabilities. + +Mitigation selection guide +-------------------------- + +1. Trusted userspace +^^^^^^^^^^^^^^^^^^^^ + + If all userspace applications are from a trusted source and do not + execute untrusted code which is supplied externally, then the mitigation + can be disabled. + + +2. Virtualization with trusted guests +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + The same considerations as above versus trusted user space apply. + +3. Virtualization with untrusted guests +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + The protection depends on the state of the L1TF mitigations. + See :ref:`virt_mechanism`. + + If the MDS mitigation is enabled and SMT is disabled, guest to host and + guest to guest attacks are prevented. + +.. _mds_default_mitigations: + +Default mitigations +------------------- + + The kernel default mitigations for vulnerable processors are: + + - Enable CPU buffer clearing + + The kernel does not by default enforce the disabling of SMT, which leaves + SMT systems vulnerable when running untrusted code. The same rationale as + for L1TF applies. + See :ref:`Documentation/admin-guide/hw-vuln//l1tf.rst `. -- cgit v1.2.3