From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- Documentation/admin-guide/mm/damon/lru_sort.rst | 294 ++++++++++++++++++++++++ 1 file changed, 294 insertions(+) create mode 100644 Documentation/admin-guide/mm/damon/lru_sort.rst (limited to 'Documentation/admin-guide/mm/damon/lru_sort.rst') diff --git a/Documentation/admin-guide/mm/damon/lru_sort.rst b/Documentation/admin-guide/mm/damon/lru_sort.rst new file mode 100644 index 000000000..c09cace80 --- /dev/null +++ b/Documentation/admin-guide/mm/damon/lru_sort.rst @@ -0,0 +1,294 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================= +DAMON-based LRU-lists Sorting +============================= + +DAMON-based LRU-lists Sorting (DAMON_LRU_SORT) is a static kernel module that +aimed to be used for proactive and lightweight data access pattern based +(de)prioritization of pages on their LRU-lists for making LRU-lists a more +trusworthy data access pattern source. + +Where Proactive LRU-lists Sorting is Required? +============================================== + +As page-granularity access checking overhead could be significant on huge +systems, LRU lists are normally not proactively sorted but partially and +reactively sorted for special events including specific user requests, system +calls and memory pressure. As a result, LRU lists are sometimes not so +perfectly prepared to be used as a trustworthy access pattern source for some +situations including reclamation target pages selection under sudden memory +pressure. + +Because DAMON can identify access patterns of best-effort accuracy while +inducing only user-specified range of overhead, proactively running +DAMON_LRU_SORT could be helpful for making LRU lists more trustworthy access +pattern source with low and controlled overhead. + +How It Works? +============= + +DAMON_LRU_SORT finds hot pages (pages of memory regions that showing access +rates that higher than a user-specified threshold) and cold pages (pages of +memory regions that showing no access for a time that longer than a +user-specified threshold) using DAMON, and prioritizes hot pages while +deprioritizing cold pages on their LRU-lists. To avoid it consuming too much +CPU for the prioritizations, a CPU time usage limit can be configured. Under +the limit, it prioritizes and deprioritizes more hot and cold pages first, +respectively. System administrators can also configure under what situation +this scheme should automatically activated and deactivated with three memory +pressure watermarks. + +Its default parameters for hotness/coldness thresholds and CPU quota limit are +conservatively chosen. That is, the module under its default parameters could +be widely used without harm for common situations while providing a level of +benefits for systems having clear hot/cold access patterns under memory +pressure while consuming only a limited small portion of CPU time. + +Interface: Module Parameters +============================ + +To use this feature, you should first ensure your system is running on a kernel +that is built with ``CONFIG_DAMON_LRU_SORT=y``. + +To let sysadmins enable or disable it and tune for the given system, +DAMON_LRU_SORT utilizes module parameters. That is, you can put +``damon_lru_sort.=`` on the kernel boot command line or write +proper values to ``/sys/modules/damon_lru_sort/parameters/`` files. + +Below are the description of each parameter. + +enabled +------- + +Enable or disable DAMON_LRU_SORT. + +You can enable DAMON_LRU_SORT by setting the value of this parameter as ``Y``. +Setting it as ``N`` disables DAMON_LRU_SORT. Note that DAMON_LRU_SORT could do +no real monitoring and LRU-lists sorting due to the watermarks-based activation +condition. Refer to below descriptions for the watermarks parameter for this. + +commit_inputs +------------- + +Make DAMON_LRU_SORT reads the input parameters again, except ``enabled``. + +Input parameters that updated while DAMON_LRU_SORT is running are not applied +by default. Once this parameter is set as ``Y``, DAMON_LRU_SORT reads values +of parametrs except ``enabled`` again. Once the re-reading is done, this +parameter is set as ``N``. If invalid parameters are found while the +re-reading, DAMON_LRU_SORT will be disabled. + +hot_thres_access_freq +--------------------- + +Access frequency threshold for hot memory regions identification in permil. + +If a memory region is accessed in frequency of this or higher, DAMON_LRU_SORT +identifies the region as hot, and mark it as accessed on the LRU list, so that +it could not be reclaimed under memory pressure. 50% by default. + +cold_min_age +------------ + +Time threshold for cold memory regions identification in microseconds. + +If a memory region is not accessed for this or longer time, DAMON_LRU_SORT +identifies the region as cold, and mark it as unaccessed on the LRU list, so +that it could be reclaimed first under memory pressure. 120 seconds by +default. + +quota_ms +-------- + +Limit of time for trying the LRU lists sorting in milliseconds. + +DAMON_LRU_SORT tries to use only up to this time within a time window +(quota_reset_interval_ms) for trying LRU lists sorting. This can be used +for limiting CPU consumption of DAMON_LRU_SORT. If the value is zero, the +limit is disabled. + +10 ms by default. + +quota_reset_interval_ms +----------------------- + +The time quota charge reset interval in milliseconds. + +The charge reset interval for the quota of time (quota_ms). That is, +DAMON_LRU_SORT does not try LRU-lists sorting for more than quota_ms +milliseconds or quota_sz bytes within quota_reset_interval_ms milliseconds. + +1 second by default. + +wmarks_interval +--------------- + +The watermarks check time interval in microseconds. + +Minimal time to wait before checking the watermarks, when DAMON_LRU_SORT is +enabled but inactive due to its watermarks rule. 5 seconds by default. + +wmarks_high +----------- + +Free memory rate (per thousand) for the high watermark. + +If free memory of the system in bytes per thousand bytes is higher than this, +DAMON_LRU_SORT becomes inactive, so it does nothing but periodically checks the +watermarks. 200 (20%) by default. + +wmarks_mid +---------- + +Free memory rate (per thousand) for the middle watermark. + +If free memory of the system in bytes per thousand bytes is between this and +the low watermark, DAMON_LRU_SORT becomes active, so starts the monitoring and +the LRU-lists sorting. 150 (15%) by default. + +wmarks_low +---------- + +Free memory rate (per thousand) for the low watermark. + +If free memory of the system in bytes per thousand bytes is lower than this, +DAMON_LRU_SORT becomes inactive, so it does nothing but periodically checks the +watermarks. 50 (5%) by default. + +sample_interval +--------------- + +Sampling interval for the monitoring in microseconds. + +The sampling interval of DAMON for the cold memory monitoring. Please refer to +the DAMON documentation (:doc:`usage`) for more detail. 5ms by default. + +aggr_interval +------------- + +Aggregation interval for the monitoring in microseconds. + +The aggregation interval of DAMON for the cold memory monitoring. Please +refer to the DAMON documentation (:doc:`usage`) for more detail. 100ms by +default. + +min_nr_regions +-------------- + +Minimum number of monitoring regions. + +The minimal number of monitoring regions of DAMON for the cold memory +monitoring. This can be used to set lower-bound of the monitoring quality. +But, setting this too high could result in increased monitoring overhead. +Please refer to the DAMON documentation (:doc:`usage`) for more detail. 10 by +default. + +max_nr_regions +-------------- + +Maximum number of monitoring regions. + +The maximum number of monitoring regions of DAMON for the cold memory +monitoring. This can be used to set upper-bound of the monitoring overhead. +However, setting this too low could result in bad monitoring quality. Please +refer to the DAMON documentation (:doc:`usage`) for more detail. 1000 by +defaults. + +monitor_region_start +-------------------- + +Start of target memory region in physical address. + +The start physical address of memory region that DAMON_LRU_SORT will do work +against. By default, biggest System RAM is used as the region. + +monitor_region_end +------------------ + +End of target memory region in physical address. + +The end physical address of memory region that DAMON_LRU_SORT will do work +against. By default, biggest System RAM is used as the region. + +kdamond_pid +----------- + +PID of the DAMON thread. + +If DAMON_LRU_SORT is enabled, this becomes the PID of the worker thread. Else, +-1. + +nr_lru_sort_tried_hot_regions +----------------------------- + +Number of hot memory regions that tried to be LRU-sorted. + +bytes_lru_sort_tried_hot_regions +-------------------------------- + +Total bytes of hot memory regions that tried to be LRU-sorted. + +nr_lru_sorted_hot_regions +------------------------- + +Number of hot memory regions that successfully be LRU-sorted. + +bytes_lru_sorted_hot_regions +---------------------------- + +Total bytes of hot memory regions that successfully be LRU-sorted. + +nr_hot_quota_exceeds +-------------------- + +Number of times that the time quota limit for hot regions have exceeded. + +nr_lru_sort_tried_cold_regions +------------------------------ + +Number of cold memory regions that tried to be LRU-sorted. + +bytes_lru_sort_tried_cold_regions +--------------------------------- + +Total bytes of cold memory regions that tried to be LRU-sorted. + +nr_lru_sorted_cold_regions +-------------------------- + +Number of cold memory regions that successfully be LRU-sorted. + +bytes_lru_sorted_cold_regions +----------------------------- + +Total bytes of cold memory regions that successfully be LRU-sorted. + +nr_cold_quota_exceeds +--------------------- + +Number of times that the time quota limit for cold regions have exceeded. + +Example +======= + +Below runtime example commands make DAMON_LRU_SORT to find memory regions +having >=50% access frequency and LRU-prioritize while LRU-deprioritizing +memory regions that not accessed for 120 seconds. The prioritization and +deprioritization is limited to be done using only up to 1% CPU time to avoid +DAMON_LRU_SORT consuming too much CPU time for the (de)prioritization. It also +asks DAMON_LRU_SORT to do nothing if the system's free memory rate is more than +50%, but start the real works if it becomes lower than 40%. If DAMON_RECLAIM +doesn't make progress and therefore the free memory rate becomes lower than +20%, it asks DAMON_LRU_SORT to do nothing again, so that we can fall back to +the LRU-list based page granularity reclamation. :: + + # cd /sys/modules/damon_lru_sort/parameters + # echo 500 > hot_thres_access_freq + # echo 120000000 > cold_min_age + # echo 10 > quota_ms + # echo 1000 > quota_reset_interval_ms + # echo 500 > wmarks_high + # echo 400 > wmarks_mid + # echo 200 > wmarks_low + # echo Y > enabled -- cgit v1.2.3