From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- Documentation/admin-guide/pnp.rst | 288 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 288 insertions(+) create mode 100644 Documentation/admin-guide/pnp.rst (limited to 'Documentation/admin-guide/pnp.rst') diff --git a/Documentation/admin-guide/pnp.rst b/Documentation/admin-guide/pnp.rst new file mode 100644 index 000000000..3eda08191 --- /dev/null +++ b/Documentation/admin-guide/pnp.rst @@ -0,0 +1,288 @@ +================================= +Linux Plug and Play Documentation +================================= + +:Author: Adam Belay +:Last updated: Oct. 16, 2002 + + +Overview +-------- + +Plug and Play provides a means of detecting and setting resources for legacy or +otherwise unconfigurable devices. The Linux Plug and Play Layer provides these +services to compatible drivers. + + +The User Interface +------------------ + +The Linux Plug and Play user interface provides a means to activate PnP devices +for legacy and user level drivers that do not support Linux Plug and Play. The +user interface is integrated into sysfs. + +In addition to the standard sysfs file the following are created in each +device's directory: +- id - displays a list of support EISA IDs +- options - displays possible resource configurations +- resources - displays currently allocated resources and allows resource changes + +activating a device +^^^^^^^^^^^^^^^^^^^ + +:: + + # echo "auto" > resources + +this will invoke the automatic resource config system to activate the device + +manually activating a device +^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +:: + + # echo "manual " > resources + + - the configuration number + - static or dynamic + static = for next boot + dynamic = now + +disabling a device +^^^^^^^^^^^^^^^^^^ + +:: + + # echo "disable" > resources + + +EXAMPLE: + +Suppose you need to activate the floppy disk controller. + +1. change to the proper directory, in my case it is + /driver/bus/pnp/devices/00:0f:: + + # cd /driver/bus/pnp/devices/00:0f + # cat name + PC standard floppy disk controller + +2. check if the device is already active:: + + # cat resources + DISABLED + + - Notice the string "DISABLED". This means the device is not active. + +3. check the device's possible configurations (optional):: + + # cat options + Dependent: 01 - Priority acceptable + port 0x3f0-0x3f0, align 0x7, size 0x6, 16-bit address decoding + port 0x3f7-0x3f7, align 0x0, size 0x1, 16-bit address decoding + irq 6 + dma 2 8-bit compatible + Dependent: 02 - Priority acceptable + port 0x370-0x370, align 0x7, size 0x6, 16-bit address decoding + port 0x377-0x377, align 0x0, size 0x1, 16-bit address decoding + irq 6 + dma 2 8-bit compatible + +4. now activate the device:: + + # echo "auto" > resources + +5. finally check if the device is active:: + + # cat resources + io 0x3f0-0x3f5 + io 0x3f7-0x3f7 + irq 6 + dma 2 + +also there are a series of kernel parameters:: + + pnp_reserve_irq=irq1[,irq2] .... + pnp_reserve_dma=dma1[,dma2] .... + pnp_reserve_io=io1,size1[,io2,size2] .... + pnp_reserve_mem=mem1,size1[,mem2,size2] .... + + + +The Unified Plug and Play Layer +------------------------------- + +All Plug and Play drivers, protocols, and services meet at a central location +called the Plug and Play Layer. This layer is responsible for the exchange of +information between PnP drivers and PnP protocols. Thus it automatically +forwards commands to the proper protocol. This makes writing PnP drivers +significantly easier. + +The following functions are available from the Plug and Play Layer: + +pnp_get_protocol + increments the number of uses by one + +pnp_put_protocol + deincrements the number of uses by one + +pnp_register_protocol + use this to register a new PnP protocol + +pnp_unregister_protocol + use this function to remove a PnP protocol from the Plug and Play Layer + +pnp_register_driver + adds a PnP driver to the Plug and Play Layer + + this includes driver model integration + returns zero for success or a negative error number for failure; count + calls to the .add() method if you need to know how many devices bind to + the driver + +pnp_unregister_driver + removes a PnP driver from the Plug and Play Layer + + + +Plug and Play Protocols +----------------------- + +This section contains information for PnP protocol developers. + +The following Protocols are currently available in the computing world: + +- PNPBIOS: + used for system devices such as serial and parallel ports. +- ISAPNP: + provides PnP support for the ISA bus +- ACPI: + among its many uses, ACPI provides information about system level + devices. + +It is meant to replace the PNPBIOS. It is not currently supported by Linux +Plug and Play but it is planned to be in the near future. + + +Requirements for a Linux PnP protocol: +1. the protocol must use EISA IDs +2. the protocol must inform the PnP Layer of a device's current configuration + +- the ability to set resources is optional but preferred. + +The following are PnP protocol related functions: + +pnp_add_device + use this function to add a PnP device to the PnP layer + + only call this function when all wanted values are set in the pnp_dev + structure + +pnp_init_device + call this to initialize the PnP structure + +pnp_remove_device + call this to remove a device from the Plug and Play Layer. + it will fail if the device is still in use. + automatically will free mem used by the device and related structures + +pnp_add_id + adds an EISA ID to the list of supported IDs for the specified device + +For more information consult the source of a protocol such as +/drivers/pnp/pnpbios/core.c. + + + +Linux Plug and Play Drivers +--------------------------- + +This section contains information for Linux PnP driver developers. + +The New Way +^^^^^^^^^^^ + +1. first make a list of supported EISA IDS + + ex:: + + static const struct pnp_id pnp_dev_table[] = { + /* Standard LPT Printer Port */ + {.id = "PNP0400", .driver_data = 0}, + /* ECP Printer Port */ + {.id = "PNP0401", .driver_data = 0}, + {.id = ""} + }; + + Please note that the character 'X' can be used as a wild card in the function + portion (last four characters). + + ex:: + + /* Unknown PnP modems */ + { "PNPCXXX", UNKNOWN_DEV }, + + Supported PnP card IDs can optionally be defined. + ex:: + + static const struct pnp_id pnp_card_table[] = { + { "ANYDEVS", 0 }, + { "", 0 } + }; + +2. Optionally define probe and remove functions. It may make sense not to + define these functions if the driver already has a reliable method of detecting + the resources, such as the parport_pc driver. + + ex:: + + static int + serial_pnp_probe(struct pnp_dev * dev, const struct pnp_id *card_id, const + struct pnp_id *dev_id) + { + . . . + + ex:: + + static void serial_pnp_remove(struct pnp_dev * dev) + { + . . . + + consult /drivers/serial/8250_pnp.c for more information. + +3. create a driver structure + + ex:: + + static struct pnp_driver serial_pnp_driver = { + .name = "serial", + .card_id_table = pnp_card_table, + .id_table = pnp_dev_table, + .probe = serial_pnp_probe, + .remove = serial_pnp_remove, + }; + + * name and id_table cannot be NULL. + +4. register the driver + + ex:: + + static int __init serial8250_pnp_init(void) + { + return pnp_register_driver(&serial_pnp_driver); + } + +The Old Way +^^^^^^^^^^^ + +A series of compatibility functions have been created to make it easy to convert +ISAPNP drivers. They should serve as a temporary solution only. + +They are as follows:: + + struct pnp_dev *pnp_find_dev(struct pnp_card *card, + unsigned short vendor, + unsigned short function, + struct pnp_dev *from) + -- cgit v1.2.3