From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- Documentation/admin-guide/pstore-blk.rst | 234 +++++++++++++++++++++++++++++++ 1 file changed, 234 insertions(+) create mode 100644 Documentation/admin-guide/pstore-blk.rst (limited to 'Documentation/admin-guide/pstore-blk.rst') diff --git a/Documentation/admin-guide/pstore-blk.rst b/Documentation/admin-guide/pstore-blk.rst new file mode 100644 index 000000000..2d22ead95 --- /dev/null +++ b/Documentation/admin-guide/pstore-blk.rst @@ -0,0 +1,234 @@ +.. SPDX-License-Identifier: GPL-2.0 + +pstore block oops/panic logger +============================== + +Introduction +------------ + +pstore block (pstore/blk) is an oops/panic logger that writes its logs to a +block device and non-block device before the system crashes. You can get +these log files by mounting pstore filesystem like:: + + mount -t pstore pstore /sys/fs/pstore + + +pstore block concepts +--------------------- + +pstore/blk provides efficient configuration method for pstore/blk, which +divides all configurations into two parts, configurations for user and +configurations for driver. + +Configurations for user determine how pstore/blk works, such as pmsg_size, +kmsg_size and so on. All of them support both Kconfig and module parameters, +but module parameters have priority over Kconfig. + +Configurations for driver are all about block device and non-block device, +such as total_size of block device and read/write operations. + +Configurations for user +----------------------- + +All of these configurations support both Kconfig and module parameters, but +module parameters have priority over Kconfig. + +Here is an example for module parameters:: + + pstore_blk.blkdev=/dev/mmcblk0p7 pstore_blk.kmsg_size=64 best_effort=y + +The detail of each configurations may be of interest to you. + +blkdev +~~~~~~ + +The block device to use. Most of the time, it is a partition of block device. +It's required for pstore/blk. It is also used for MTD device. + +When pstore/blk is built as a module, "blkdev" accepts the following variants: + +1. /dev/ represents the device number of disk +#. /dev/ represents the device number of partition - device + number of disk plus the partition number +#. /dev/p - same as the above; this form is used when disk + name of partitioned disk ends with a digit. + +When pstore/blk is built into the kernel, "blkdev" accepts the following variants: + +#. device number in hexadecimal representation, + with no leading 0x, for example b302. +#. PARTUUID=00112233-4455-6677-8899-AABBCCDDEEFF represents the unique id of + a partition if the partition table provides it. The UUID may be either an + EFI/GPT UUID, or refer to an MSDOS partition using the format SSSSSSSS-PP, + where SSSSSSSS is a zero-filled hex representation of the 32-bit + "NT disk signature", and PP is a zero-filled hex representation of the + 1-based partition number. +#. PARTUUID=/PARTNROFF= to select a partition in relation to a + partition with a known unique id. +#. : major and minor number of the device separated by a colon. + +It accepts the following variants for MTD device: + +1. MTD device name. "pstore" is recommended. +#. MTD device number. + +kmsg_size +~~~~~~~~~ + +The chunk size in KB for oops/panic front-end. It **MUST** be a multiple of 4. +It's optional if you do not care oops/panic log. + +There are multiple chunks for oops/panic front-end depending on the remaining +space except other pstore front-ends. + +pstore/blk will log to oops/panic chunks one by one, and always overwrite the +oldest chunk if there is no more free chunk. + +pmsg_size +~~~~~~~~~ + +The chunk size in KB for pmsg front-end. It **MUST** be a multiple of 4. +It's optional if you do not care pmsg log. + +Unlike oops/panic front-end, there is only one chunk for pmsg front-end. + +Pmsg is a user space accessible pstore object. Writes to */dev/pmsg0* are +appended to the chunk. On reboot the contents are available in +*/sys/fs/pstore/pmsg-pstore-blk-0*. + +console_size +~~~~~~~~~~~~ + +The chunk size in KB for console front-end. It **MUST** be a multiple of 4. +It's optional if you do not care console log. + +Similar to pmsg front-end, there is only one chunk for console front-end. + +All log of console will be appended to the chunk. On reboot the contents are +available in */sys/fs/pstore/console-pstore-blk-0*. + +ftrace_size +~~~~~~~~~~~ + +The chunk size in KB for ftrace front-end. It **MUST** be a multiple of 4. +It's optional if you do not care console log. + +Similar to oops front-end, there are multiple chunks for ftrace front-end +depending on the count of cpu processors. Each chunk size is equal to +ftrace_size / processors_count. + +All log of ftrace will be appended to the chunk. On reboot the contents are +combined and available in */sys/fs/pstore/ftrace-pstore-blk-0*. + +Persistent function tracing might be useful for debugging software or hardware +related hangs. Here is an example of usage:: + + # mount -t pstore pstore /sys/fs/pstore + # mount -t debugfs debugfs /sys/kernel/debug/ + # echo 1 > /sys/kernel/debug/pstore/record_ftrace + # reboot -f + [...] + # mount -t pstore pstore /sys/fs/pstore + # tail /sys/fs/pstore/ftrace-pstore-blk-0 + CPU:0 ts:5914676 c0063828 c0063b94 call_cpuidle <- cpu_startup_entry+0x1b8/0x1e0 + CPU:0 ts:5914678 c039ecdc c006385c cpuidle_enter_state <- call_cpuidle+0x44/0x48 + CPU:0 ts:5914680 c039e9a0 c039ecf0 cpuidle_enter_freeze <- cpuidle_enter_state+0x304/0x314 + CPU:0 ts:5914681 c0063870 c039ea30 sched_idle_set_state <- cpuidle_enter_state+0x44/0x314 + CPU:1 ts:5916720 c0160f59 c015ee04 kernfs_unmap_bin_file <- __kernfs_remove+0x140/0x204 + CPU:1 ts:5916721 c05ca625 c015ee0c __mutex_lock_slowpath <- __kernfs_remove+0x148/0x204 + CPU:1 ts:5916723 c05c813d c05ca630 yield_to <- __mutex_lock_slowpath+0x314/0x358 + CPU:1 ts:5916724 c05ca2d1 c05ca638 __ww_mutex_lock <- __mutex_lock_slowpath+0x31c/0x358 + +max_reason +~~~~~~~~~~ + +Limiting which kinds of kmsg dumps are stored can be controlled via +the ``max_reason`` value, as defined in include/linux/kmsg_dump.h's +``enum kmsg_dump_reason``. For example, to store both Oopses and Panics, +``max_reason`` should be set to 2 (KMSG_DUMP_OOPS), to store only Panics +``max_reason`` should be set to 1 (KMSG_DUMP_PANIC). Setting this to 0 +(KMSG_DUMP_UNDEF), means the reason filtering will be controlled by the +``printk.always_kmsg_dump`` boot param: if unset, it'll be KMSG_DUMP_OOPS, +otherwise KMSG_DUMP_MAX. + +Configurations for driver +------------------------- + +A device driver uses ``register_pstore_device`` with +``struct pstore_device_info`` to register to pstore/blk. + +.. kernel-doc:: fs/pstore/blk.c + :export: + +Compression and header +---------------------- + +Block device is large enough for uncompressed oops data. Actually we do not +recommend data compression because pstore/blk will insert some information into +the first line of oops/panic data. For example:: + + Panic: Total 16 times + +It means that it's OOPS|Panic for the 16th time since the first booting. +Sometimes the number of occurrences of oops|panic since the first booting is +important to judge whether the system is stable. + +The following line is inserted by pstore filesystem. For example:: + + Oops#2 Part1 + +It means that it's OOPS for the 2nd time on the last boot. + +Reading the data +---------------- + +The dump data can be read from the pstore filesystem. The format for these +files is ``dmesg-pstore-blk-[N]`` for oops/panic front-end, +``pmsg-pstore-blk-0`` for pmsg front-end and so on. The timestamp of the +dump file records the trigger time. To delete a stored record from block +device, simply unlink the respective pstore file. + +Attentions in panic read/write APIs +----------------------------------- + +If on panic, the kernel is not going to run for much longer, the tasks will not +be scheduled and most kernel resources will be out of service. It +looks like a single-threaded program running on a single-core computer. + +The following points require special attention for panic read/write APIs: + +1. Can **NOT** allocate any memory. + If you need memory, just allocate while the block driver is initializing + rather than waiting until the panic. +#. Must be polled, **NOT** interrupt driven. + No task schedule any more. The block driver should delay to ensure the write + succeeds, but NOT sleep. +#. Can **NOT** take any lock. + There is no other task, nor any shared resource; you are safe to break all + locks. +#. Just use CPU to transfer. + Do not use DMA to transfer unless you are sure that DMA will not keep lock. +#. Control registers directly. + Please control registers directly rather than use Linux kernel resources. + Do I/O map while initializing rather than wait until a panic occurs. +#. Reset your block device and controller if necessary. + If you are not sure of the state of your block device and controller when + a panic occurs, you are safe to stop and reset them. + +pstore/blk supports psblk_blkdev_info(), which is defined in +*linux/pstore_blk.h*, to get information of using block device, such as the +device number, sector count and start sector of the whole disk. + +pstore block internals +---------------------- + +For developer reference, here are all the important structures and APIs: + +.. kernel-doc:: fs/pstore/zone.c + :internal: + +.. kernel-doc:: include/linux/pstore_zone.h + :internal: + +.. kernel-doc:: include/linux/pstore_blk.h + :internal: -- cgit v1.2.3