From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- Documentation/admin-guide/svga.rst | 250 +++++++++++++++++++++++++++++++++++++ 1 file changed, 250 insertions(+) create mode 100644 Documentation/admin-guide/svga.rst (limited to 'Documentation/admin-guide/svga.rst') diff --git a/Documentation/admin-guide/svga.rst b/Documentation/admin-guide/svga.rst new file mode 100644 index 000000000..9eb1e0738 --- /dev/null +++ b/Documentation/admin-guide/svga.rst @@ -0,0 +1,250 @@ +.. include:: + +================================= +Video Mode Selection Support 2.13 +================================= + +:Copyright: |copy| 1995--1999 Martin Mares, + +Intro +~~~~~ + +This small document describes the "Video Mode Selection" feature which +allows the use of various special video modes supported by the video BIOS. Due +to usage of the BIOS, the selection is limited to boot time (before the +kernel decompression starts) and works only on 80X86 machines that are +booted through BIOS firmware (as opposed to through UEFI, kexec, etc.). + +.. note:: + + Short intro for the impatient: Just use vga=ask for the first time, + enter ``scan`` on the video mode prompt, pick the mode you want to use, + remember its mode ID (the four-digit hexadecimal number) and then + set the vga parameter to this number (converted to decimal first). + +The video mode to be used is selected by a kernel parameter which can be +specified in the kernel Makefile (the SVGA_MODE=... line) or by the "vga=..." +option of LILO (or some other boot loader you use) or by the "xrandr" utility +(present in standard Linux utility packages). You can use the following values +of this parameter:: + + NORMAL_VGA - Standard 80x25 mode available on all display adapters. + + EXTENDED_VGA - Standard 8-pixel font mode: 80x43 on EGA, 80x50 on VGA. + + ASK_VGA - Display a video mode menu upon startup (see below). + + 0..35 - Menu item number (when you have used the menu to view the list of + modes available on your adapter, you can specify the menu item you want + to use). 0..9 correspond to "0".."9", 10..35 to "a".."z". Warning: the + mode list displayed may vary as the kernel version changes, because the + modes are listed in a "first detected -- first displayed" manner. It's + better to use absolute mode numbers instead. + + 0x.... - Hexadecimal video mode ID (also displayed on the menu, see below + for exact meaning of the ID). Warning: LILO doesn't support + hexadecimal numbers -- you have to convert it to decimal manually. + +Menu +~~~~ + +The ASK_VGA mode causes the kernel to offer a video mode menu upon +bootup. It displays a "Press to see video modes available, +to continue or wait 30 secs" message. If you press , you enter the +menu, if you press or wait 30 seconds, the kernel will boot up in +the standard 80x25 mode. + +The menu looks like:: + + Video adapter: + Mode: COLSxROWS: + 0 0F00 80x25 + 1 0F01 80x50 + 2 0F02 80x43 + 3 0F03 80x26 + .... + Enter mode number or ``scan``: + + tells what video adapter did Linux detect +-- it's either a generic adapter name (MDA, CGA, HGC, EGA, VGA, VESA VGA [a VGA +with VESA-compliant BIOS]) or a chipset name (e.g., Trident). Direct detection +of chipsets is turned off by default as it's inherently unreliable due to +absolutely insane PC design. + +"0 0F00 80x25" means that the first menu item (the menu items are numbered +from "0" to "9" and from "a" to "z") is a 80x25 mode with ID=0x0f00 (see the +next section for a description of mode IDs). + + encourages you to enter the item number or mode ID +you wish to set and press . If the computer complains something about +"Unknown mode ID", it is trying to tell you that it isn't possible to set such +a mode. It's also possible to press only which leaves the current mode. + +The mode list usually contains a few basic modes and some VESA modes. In +case your chipset has been detected, some chipset-specific modes are shown as +well (some of these might be missing or unusable on your machine as different +BIOSes are often shipped with the same card and the mode numbers depend purely +on the VGA BIOS). + +The modes displayed on the menu are partially sorted: The list starts with +the standard modes (80x25 and 80x50) followed by "special" modes (80x28 and +80x43), local modes (if the local modes feature is enabled), VESA modes and +finally SVGA modes for the auto-detected adapter. + +If you are not happy with the mode list offered (e.g., if you think your card +is able to do more), you can enter "scan" instead of item number / mode ID. The +program will try to ask the BIOS for all possible video mode numbers and test +what happens then. The screen will be probably flashing wildly for some time and +strange noises will be heard from inside the monitor and so on and then, really +all consistent video modes supported by your BIOS will appear (plus maybe some +``ghost modes``). If you are afraid this could damage your monitor, don't use +this function. + +After scanning, the mode ordering is a bit different: the auto-detected SVGA +modes are not listed at all and the modes revealed by ``scan`` are shown before +all VESA modes. + +Mode IDs +~~~~~~~~ + +Because of the complexity of all the video stuff, the video mode IDs +used here are also a bit complex. A video mode ID is a 16-bit number usually +expressed in a hexadecimal notation (starting with "0x"). You can set a mode +by entering its mode directly if you know it even if it isn't shown on the menu. + +The ID numbers can be divided to those regions:: + + 0x0000 to 0x00ff - menu item references. 0x0000 is the first item. Don't use + outside the menu as this can change from boot to boot (especially if you + have used the ``scan`` feature). + + 0x0100 to 0x017f - standard BIOS modes. The ID is a BIOS video mode number + (as presented to INT 10, function 00) increased by 0x0100. + + 0x0200 to 0x08ff - VESA BIOS modes. The ID is a VESA mode ID increased by + 0x0100. All VESA modes should be autodetected and shown on the menu. + + 0x0900 to 0x09ff - Video7 special modes. Set by calling INT 0x10, AX=0x6f05. + (Usually 940=80x43, 941=132x25, 942=132x44, 943=80x60, 944=100x60, + 945=132x28 for the standard Video7 BIOS) + + 0x0f00 to 0x0fff - special modes (they are set by various tricks -- usually + by modifying one of the standard modes). Currently available: + 0x0f00 standard 80x25, don't reset mode if already set (=FFFF) + 0x0f01 standard with 8-point font: 80x43 on EGA, 80x50 on VGA + 0x0f02 VGA 80x43 (VGA switched to 350 scanlines with a 8-point font) + 0x0f03 VGA 80x28 (standard VGA scans, but 14-point font) + 0x0f04 leave current video mode + 0x0f05 VGA 80x30 (480 scans, 16-point font) + 0x0f06 VGA 80x34 (480 scans, 14-point font) + 0x0f07 VGA 80x60 (480 scans, 8-point font) + 0x0f08 Graphics hack (see the VIDEO_GFX_HACK paragraph below) + + 0x1000 to 0x7fff - modes specified by resolution. The code has a "0xRRCC" + form where RR is a number of rows and CC is a number of columns. + E.g., 0x1950 corresponds to a 80x25 mode, 0x2b84 to 132x43 etc. + This is the only fully portable way to refer to a non-standard mode, + but it relies on the mode being found and displayed on the menu + (remember that mode scanning is not done automatically). + + 0xff00 to 0xffff - aliases for backward compatibility: + 0xffff equivalent to 0x0f00 (standard 80x25) + 0xfffe equivalent to 0x0f01 (EGA 80x43 or VGA 80x50) + +If you add 0x8000 to the mode ID, the program will try to recalculate +vertical display timing according to mode parameters, which can be used to +eliminate some annoying bugs of certain VGA BIOSes (usually those used for +cards with S3 chipsets and old Cirrus Logic BIOSes) -- mainly extra lines at the +end of the display. + +Options +~~~~~~~ + +Build options for arch/x86/boot/* are selected by the kernel kconfig +utility and the kernel .config file. + +VIDEO_GFX_HACK - includes special hack for setting of graphics modes +to be used later by special drivers. +Allows to set _any_ BIOS mode including graphic ones and forcing specific +text screen resolution instead of peeking it from BIOS variables. Don't use +unless you think you know what you're doing. To activate this setup, use +mode number 0x0f08 (see the Mode IDs section above). + +Still doesn't work? +~~~~~~~~~~~~~~~~~~~ + +When the mode detection doesn't work (e.g., the mode list is incorrect or +the machine hangs instead of displaying the menu), try to switch off some of +the configuration options listed under "Options". If it fails, you can still use +your kernel with the video mode set directly via the kernel parameter. + +In either case, please send me a bug report containing what _exactly_ +happens and how do the configuration switches affect the behaviour of the bug. + +If you start Linux from M$-DOS, you might also use some DOS tools for +video mode setting. In this case, you must specify the 0x0f04 mode ("leave +current settings") to Linux, because if you don't and you use any non-standard +mode, Linux will switch to 80x25 automatically. + +If you set some extended mode and there's one or more extra lines on the +bottom of the display containing already scrolled-out text, your VGA BIOS +contains the most common video BIOS bug called "incorrect vertical display +end setting". Adding 0x8000 to the mode ID might fix the problem. Unfortunately, +this must be done manually -- no autodetection mechanisms are available. + +History +~~~~~~~ + +=============== ================================================================ +1.0 (??-Nov-95) First version supporting all adapters supported by the old + setup.S + Cirrus Logic 54XX. Present in some 1.3.4? kernels + and then removed due to instability on some machines. +2.0 (28-Jan-96) Rewritten from scratch. Cirrus Logic 64XX support added, almost + everything is configurable, the VESA support should be much more + stable, explicit mode numbering allowed, "scan" implemented etc. +2.1 (30-Jan-96) VESA modes moved to 0x200-0x3ff. Mode selection by resolution + supported. Few bugs fixed. VESA modes are listed prior to + modes supplied by SVGA autodetection as they are more reliable. + CLGD autodetect works better. Doesn't depend on 80x25 being + active when started. Scanning fixed. 80x43 (any VGA) added. + Code cleaned up. +2.2 (01-Feb-96) EGA 80x43 fixed. VESA extended to 0x200-0x4ff (non-standard 02XX + VESA modes work now). Display end bug workaround supported. + Special modes renumbered to allow adding of the "recalculate" + flag, 0xffff and 0xfffe became aliases instead of real IDs. + Screen contents retained during mode changes. +2.3 (15-Mar-96) Changed to work with 1.3.74 kernel. +2.4 (18-Mar-96) Added patches by Hans Lermen fixing a memory overwrite problem + with some boot loaders. Memory management rewritten to reflect + these changes. Unfortunately, screen contents retaining works + only with some loaders now. + Added a Tseng 132x60 mode. +2.5 (19-Mar-96) Fixed a VESA mode scanning bug introduced in 2.4. +2.6 (25-Mar-96) Some VESA BIOS errors not reported -- it fixes error reports on + several cards with broken VESA code (e.g., ATI VGA). +2.7 (09-Apr-96) - Accepted all VESA modes in range 0x100 to 0x7ff, because some + cards use very strange mode numbers. + - Added Realtek VGA modes (thanks to Gonzalo Tornaria). + - Hardware testing order slightly changed, tests based on ROM + contents done as first. + - Added support for special Video7 mode switching functions + (thanks to Tom Vander Aa). + - Added 480-scanline modes (especially useful for notebooks, + original version written by hhanemaa@cs.ruu.nl, patched by + Jeff Chua, rewritten by me). + - Screen store/restore fixed. +2.8 (14-Apr-96) - Previous release was not compilable without CONFIG_VIDEO_SVGA. + - Better recognition of text modes during mode scan. +2.9 (12-May-96) - Ignored VESA modes 0x80 - 0xff (more VESA BIOS bugs!) +2.10(11-Nov-96) - The whole thing made optional. + - Added the CONFIG_VIDEO_400_HACK switch. + - Added the CONFIG_VIDEO_GFX_HACK switch. + - Code cleanup. +2.11(03-May-97) - Yet another cleanup, now including also the documentation. + - Direct testing of SVGA adapters turned off by default, ``scan`` + offered explicitly on the prompt line. + - Removed the doc section describing adding of new probing + functions as I try to get rid of _all_ hardware probing here. +2.12(25-May-98) Added support for VESA frame buffer graphics. +2.13(14-May-99) Minor documentation fixes. +=============== ================================================================ -- cgit v1.2.3