From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- Documentation/arm64/tagged-address-abi.rst | 179 +++++++++++++++++++++++++++++ 1 file changed, 179 insertions(+) create mode 100644 Documentation/arm64/tagged-address-abi.rst (limited to 'Documentation/arm64/tagged-address-abi.rst') diff --git a/Documentation/arm64/tagged-address-abi.rst b/Documentation/arm64/tagged-address-abi.rst new file mode 100644 index 000000000..540a1d4fc --- /dev/null +++ b/Documentation/arm64/tagged-address-abi.rst @@ -0,0 +1,179 @@ +========================== +AArch64 TAGGED ADDRESS ABI +========================== + +Authors: Vincenzo Frascino + Catalin Marinas + +Date: 21 August 2019 + +This document describes the usage and semantics of the Tagged Address +ABI on AArch64 Linux. + +1. Introduction +--------------- + +On AArch64 the ``TCR_EL1.TBI0`` bit is set by default, allowing +userspace (EL0) to perform memory accesses through 64-bit pointers with +a non-zero top byte. This document describes the relaxation of the +syscall ABI that allows userspace to pass certain tagged pointers to +kernel syscalls. + +2. AArch64 Tagged Address ABI +----------------------------- + +From the kernel syscall interface perspective and for the purposes of +this document, a "valid tagged pointer" is a pointer with a potentially +non-zero top-byte that references an address in the user process address +space obtained in one of the following ways: + +- ``mmap()`` syscall where either: + + - flags have the ``MAP_ANONYMOUS`` bit set or + - the file descriptor refers to a regular file (including those + returned by ``memfd_create()``) or ``/dev/zero`` + +- ``brk()`` syscall (i.e. the heap area between the initial location of + the program break at process creation and its current location). + +- any memory mapped by the kernel in the address space of the process + during creation and with the same restrictions as for ``mmap()`` above + (e.g. data, bss, stack). + +The AArch64 Tagged Address ABI has two stages of relaxation depending on +how the user addresses are used by the kernel: + +1. User addresses not accessed by the kernel but used for address space + management (e.g. ``mprotect()``, ``madvise()``). The use of valid + tagged pointers in this context is allowed with these exceptions: + + - ``brk()``, ``mmap()`` and the ``new_address`` argument to + ``mremap()`` as these have the potential to alias with existing + user addresses. + + NOTE: This behaviour changed in v5.6 and so some earlier kernels may + incorrectly accept valid tagged pointers for the ``brk()``, + ``mmap()`` and ``mremap()`` system calls. + + - The ``range.start``, ``start`` and ``dst`` arguments to the + ``UFFDIO_*`` ``ioctl()``s used on a file descriptor obtained from + ``userfaultfd()``, as fault addresses subsequently obtained by reading + the file descriptor will be untagged, which may otherwise confuse + tag-unaware programs. + + NOTE: This behaviour changed in v5.14 and so some earlier kernels may + incorrectly accept valid tagged pointers for this system call. + +2. User addresses accessed by the kernel (e.g. ``write()``). This ABI + relaxation is disabled by default and the application thread needs to + explicitly enable it via ``prctl()`` as follows: + + - ``PR_SET_TAGGED_ADDR_CTRL``: enable or disable the AArch64 Tagged + Address ABI for the calling thread. + + The ``(unsigned int) arg2`` argument is a bit mask describing the + control mode used: + + - ``PR_TAGGED_ADDR_ENABLE``: enable AArch64 Tagged Address ABI. + Default status is disabled. + + Arguments ``arg3``, ``arg4``, and ``arg5`` must be 0. + + - ``PR_GET_TAGGED_ADDR_CTRL``: get the status of the AArch64 Tagged + Address ABI for the calling thread. + + Arguments ``arg2``, ``arg3``, ``arg4``, and ``arg5`` must be 0. + + The ABI properties described above are thread-scoped, inherited on + clone() and fork() and cleared on exec(). + + Calling ``prctl(PR_SET_TAGGED_ADDR_CTRL, PR_TAGGED_ADDR_ENABLE, 0, 0, 0)`` + returns ``-EINVAL`` if the AArch64 Tagged Address ABI is globally + disabled by ``sysctl abi.tagged_addr_disabled=1``. The default + ``sysctl abi.tagged_addr_disabled`` configuration is 0. + +When the AArch64 Tagged Address ABI is enabled for a thread, the +following behaviours are guaranteed: + +- All syscalls except the cases mentioned in section 3 can accept any + valid tagged pointer. + +- The syscall behaviour is undefined for invalid tagged pointers: it may + result in an error code being returned, a (fatal) signal being raised, + or other modes of failure. + +- The syscall behaviour for a valid tagged pointer is the same as for + the corresponding untagged pointer. + + +A definition of the meaning of tagged pointers on AArch64 can be found +in Documentation/arm64/tagged-pointers.rst. + +3. AArch64 Tagged Address ABI Exceptions +----------------------------------------- + +The following system call parameters must be untagged regardless of the +ABI relaxation: + +- ``prctl()`` other than pointers to user data either passed directly or + indirectly as arguments to be accessed by the kernel. + +- ``ioctl()`` other than pointers to user data either passed directly or + indirectly as arguments to be accessed by the kernel. + +- ``shmat()`` and ``shmdt()``. + +- ``brk()`` (since kernel v5.6). + +- ``mmap()`` (since kernel v5.6). + +- ``mremap()``, the ``new_address`` argument (since kernel v5.6). + +Any attempt to use non-zero tagged pointers may result in an error code +being returned, a (fatal) signal being raised, or other modes of +failure. + +4. Example of correct usage +--------------------------- +.. code-block:: c + + #include + #include + #include + #include + #include + + #define PR_SET_TAGGED_ADDR_CTRL 55 + #define PR_TAGGED_ADDR_ENABLE (1UL << 0) + + #define TAG_SHIFT 56 + + int main(void) + { + int tbi_enabled = 0; + unsigned long tag = 0; + char *ptr; + + /* check/enable the tagged address ABI */ + if (!prctl(PR_SET_TAGGED_ADDR_CTRL, PR_TAGGED_ADDR_ENABLE, 0, 0, 0)) + tbi_enabled = 1; + + /* memory allocation */ + ptr = mmap(NULL, sysconf(_SC_PAGE_SIZE), PROT_READ | PROT_WRITE, + MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); + if (ptr == MAP_FAILED) + return 1; + + /* set a non-zero tag if the ABI is available */ + if (tbi_enabled) + tag = rand() & 0xff; + ptr = (char *)((unsigned long)ptr | (tag << TAG_SHIFT)); + + /* memory access to a tagged address */ + strcpy(ptr, "tagged pointer\n"); + + /* syscall with a tagged pointer */ + write(1, ptr, strlen(ptr)); + + return 0; + } -- cgit v1.2.3