From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- Documentation/bpf/map_array.rst | 262 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 262 insertions(+) create mode 100644 Documentation/bpf/map_array.rst (limited to 'Documentation/bpf/map_array.rst') diff --git a/Documentation/bpf/map_array.rst b/Documentation/bpf/map_array.rst new file mode 100644 index 000000000..f2f51a53e --- /dev/null +++ b/Documentation/bpf/map_array.rst @@ -0,0 +1,262 @@ +.. SPDX-License-Identifier: GPL-2.0-only +.. Copyright (C) 2022 Red Hat, Inc. + +================================================ +BPF_MAP_TYPE_ARRAY and BPF_MAP_TYPE_PERCPU_ARRAY +================================================ + +.. note:: + - ``BPF_MAP_TYPE_ARRAY`` was introduced in kernel version 3.19 + - ``BPF_MAP_TYPE_PERCPU_ARRAY`` was introduced in version 4.6 + +``BPF_MAP_TYPE_ARRAY`` and ``BPF_MAP_TYPE_PERCPU_ARRAY`` provide generic array +storage. The key type is an unsigned 32-bit integer (4 bytes) and the map is +of constant size. The size of the array is defined in ``max_entries`` at +creation time. All array elements are pre-allocated and zero initialized when +created. ``BPF_MAP_TYPE_PERCPU_ARRAY`` uses a different memory region for each +CPU whereas ``BPF_MAP_TYPE_ARRAY`` uses the same memory region. The value +stored can be of any size, however, all array elements are aligned to 8 +bytes. + +Since kernel 5.5, memory mapping may be enabled for ``BPF_MAP_TYPE_ARRAY`` by +setting the flag ``BPF_F_MMAPABLE``. The map definition is page-aligned and +starts on the first page. Sufficient page-sized and page-aligned blocks of +memory are allocated to store all array values, starting on the second page, +which in some cases will result in over-allocation of memory. The benefit of +using this is increased performance and ease of use since userspace programs +would not be required to use helper functions to access and mutate data. + +Usage +===== + +Kernel BPF +---------- + +bpf_map_lookup_elem() +~~~~~~~~~~~~~~~~~~~~~ + +.. code-block:: c + + void *bpf_map_lookup_elem(struct bpf_map *map, const void *key) + +Array elements can be retrieved using the ``bpf_map_lookup_elem()`` helper. +This helper returns a pointer into the array element, so to avoid data races +with userspace reading the value, the user must use primitives like +``__sync_fetch_and_add()`` when updating the value in-place. + +bpf_map_update_elem() +~~~~~~~~~~~~~~~~~~~~~ + +.. code-block:: c + + long bpf_map_update_elem(struct bpf_map *map, const void *key, const void *value, u64 flags) + +Array elements can be updated using the ``bpf_map_update_elem()`` helper. + +``bpf_map_update_elem()`` returns 0 on success, or negative error in case of +failure. + +Since the array is of constant size, ``bpf_map_delete_elem()`` is not supported. +To clear an array element, you may use ``bpf_map_update_elem()`` to insert a +zero value to that index. + +Per CPU Array +------------- + +Values stored in ``BPF_MAP_TYPE_ARRAY`` can be accessed by multiple programs +across different CPUs. To restrict storage to a single CPU, you may use a +``BPF_MAP_TYPE_PERCPU_ARRAY``. + +When using a ``BPF_MAP_TYPE_PERCPU_ARRAY`` the ``bpf_map_update_elem()`` and +``bpf_map_lookup_elem()`` helpers automatically access the slot for the current +CPU. + +bpf_map_lookup_percpu_elem() +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +.. code-block:: c + + void *bpf_map_lookup_percpu_elem(struct bpf_map *map, const void *key, u32 cpu) + +The ``bpf_map_lookup_percpu_elem()`` helper can be used to lookup the array +value for a specific CPU. Returns value on success , or ``NULL`` if no entry was +found or ``cpu`` is invalid. + +Concurrency +----------- + +Since kernel version 5.1, the BPF infrastructure provides ``struct bpf_spin_lock`` +to synchronize access. + +Userspace +--------- + +Access from userspace uses libbpf APIs with the same names as above, with +the map identified by its ``fd``. + +Examples +======== + +Please see the ``tools/testing/selftests/bpf`` directory for functional +examples. The code samples below demonstrate API usage. + +Kernel BPF +---------- + +This snippet shows how to declare an array in a BPF program. + +.. code-block:: c + + struct { + __uint(type, BPF_MAP_TYPE_ARRAY); + __type(key, u32); + __type(value, long); + __uint(max_entries, 256); + } my_map SEC(".maps"); + + +This example BPF program shows how to access an array element. + +.. code-block:: c + + int bpf_prog(struct __sk_buff *skb) + { + struct iphdr ip; + int index; + long *value; + + if (bpf_skb_load_bytes(skb, ETH_HLEN, &ip, sizeof(ip)) < 0) + return 0; + + index = ip.protocol; + value = bpf_map_lookup_elem(&my_map, &index); + if (value) + __sync_fetch_and_add(value, skb->len); + + return 0; + } + +Userspace +--------- + +BPF_MAP_TYPE_ARRAY +~~~~~~~~~~~~~~~~~~ + +This snippet shows how to create an array, using ``bpf_map_create_opts`` to +set flags. + +.. code-block:: c + + #include + #include + + int create_array() + { + int fd; + LIBBPF_OPTS(bpf_map_create_opts, opts, .map_flags = BPF_F_MMAPABLE); + + fd = bpf_map_create(BPF_MAP_TYPE_ARRAY, + "example_array", /* name */ + sizeof(__u32), /* key size */ + sizeof(long), /* value size */ + 256, /* max entries */ + &opts); /* create opts */ + return fd; + } + +This snippet shows how to initialize the elements of an array. + +.. code-block:: c + + int initialize_array(int fd) + { + __u32 i; + long value; + int ret; + + for (i = 0; i < 256; i++) { + value = i; + ret = bpf_map_update_elem(fd, &i, &value, BPF_ANY); + if (ret < 0) + return ret; + } + + return ret; + } + +This snippet shows how to retrieve an element value from an array. + +.. code-block:: c + + int lookup(int fd) + { + __u32 index = 42; + long value; + int ret; + + ret = bpf_map_lookup_elem(fd, &index, &value); + if (ret < 0) + return ret; + + /* use value here */ + assert(value == 42); + + return ret; + } + +BPF_MAP_TYPE_PERCPU_ARRAY +~~~~~~~~~~~~~~~~~~~~~~~~~ + +This snippet shows how to initialize the elements of a per CPU array. + +.. code-block:: c + + int initialize_array(int fd) + { + int ncpus = libbpf_num_possible_cpus(); + long values[ncpus]; + __u32 i, j; + int ret; + + for (i = 0; i < 256 ; i++) { + for (j = 0; j < ncpus; j++) + values[j] = i; + ret = bpf_map_update_elem(fd, &i, &values, BPF_ANY); + if (ret < 0) + return ret; + } + + return ret; + } + +This snippet shows how to access the per CPU elements of an array value. + +.. code-block:: c + + int lookup(int fd) + { + int ncpus = libbpf_num_possible_cpus(); + __u32 index = 42, j; + long values[ncpus]; + int ret; + + ret = bpf_map_lookup_elem(fd, &index, &values); + if (ret < 0) + return ret; + + for (j = 0; j < ncpus; j++) { + /* Use per CPU value here */ + assert(values[j] == 42); + } + + return ret; + } + +Semantics +========= + +As shown in the example above, when accessing a ``BPF_MAP_TYPE_PERCPU_ARRAY`` +in userspace, each value is an array with ``ncpus`` elements. + +When calling ``bpf_map_update_elem()`` the flag ``BPF_NOEXIST`` can not be used +for these maps. -- cgit v1.2.3