From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- Documentation/bpf/prog_lsm.rst | 143 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 143 insertions(+) create mode 100644 Documentation/bpf/prog_lsm.rst (limited to 'Documentation/bpf/prog_lsm.rst') diff --git a/Documentation/bpf/prog_lsm.rst b/Documentation/bpf/prog_lsm.rst new file mode 100644 index 000000000..0dc3fb0d9 --- /dev/null +++ b/Documentation/bpf/prog_lsm.rst @@ -0,0 +1,143 @@ +.. SPDX-License-Identifier: GPL-2.0+ +.. Copyright (C) 2020 Google LLC. + +================ +LSM BPF Programs +================ + +These BPF programs allow runtime instrumentation of the LSM hooks by privileged +users to implement system-wide MAC (Mandatory Access Control) and Audit +policies using eBPF. + +Structure +--------- + +The example shows an eBPF program that can be attached to the ``file_mprotect`` +LSM hook: + +.. c:function:: int file_mprotect(struct vm_area_struct *vma, unsigned long reqprot, unsigned long prot); + +Other LSM hooks which can be instrumented can be found in +``include/linux/lsm_hooks.h``. + +eBPF programs that use Documentation/bpf/btf.rst do not need to include kernel +headers for accessing information from the attached eBPF program's context. +They can simply declare the structures in the eBPF program and only specify +the fields that need to be accessed. + +.. code-block:: c + + struct mm_struct { + unsigned long start_brk, brk, start_stack; + } __attribute__((preserve_access_index)); + + struct vm_area_struct { + unsigned long start_brk, brk, start_stack; + unsigned long vm_start, vm_end; + struct mm_struct *vm_mm; + } __attribute__((preserve_access_index)); + + +.. note:: The order of the fields is irrelevant. + +This can be further simplified (if one has access to the BTF information at +build time) by generating the ``vmlinux.h`` with: + +.. code-block:: console + + # bpftool btf dump file format c > vmlinux.h + +.. note:: ``path-to-btf-vmlinux`` can be ``/sys/kernel/btf/vmlinux`` if the + build environment matches the environment the BPF programs are + deployed in. + +The ``vmlinux.h`` can then simply be included in the BPF programs without +requiring the definition of the types. + +The eBPF programs can be declared using the``BPF_PROG`` +macros defined in `tools/lib/bpf/bpf_tracing.h`_. In this +example: + + * ``"lsm/file_mprotect"`` indicates the LSM hook that the program must + be attached to + * ``mprotect_audit`` is the name of the eBPF program + +.. code-block:: c + + SEC("lsm/file_mprotect") + int BPF_PROG(mprotect_audit, struct vm_area_struct *vma, + unsigned long reqprot, unsigned long prot, int ret) + { + /* ret is the return value from the previous BPF program + * or 0 if it's the first hook. + */ + if (ret != 0) + return ret; + + int is_heap; + + is_heap = (vma->vm_start >= vma->vm_mm->start_brk && + vma->vm_end <= vma->vm_mm->brk); + + /* Return an -EPERM or write information to the perf events buffer + * for auditing + */ + if (is_heap) + return -EPERM; + } + +The ``__attribute__((preserve_access_index))`` is a clang feature that allows +the BPF verifier to update the offsets for the access at runtime using the +Documentation/bpf/btf.rst information. Since the BPF verifier is aware of the +types, it also validates all the accesses made to the various types in the +eBPF program. + +Loading +------- + +eBPF programs can be loaded with the :manpage:`bpf(2)` syscall's +``BPF_PROG_LOAD`` operation: + +.. code-block:: c + + struct bpf_object *obj; + + obj = bpf_object__open("./my_prog.o"); + bpf_object__load(obj); + +This can be simplified by using a skeleton header generated by ``bpftool``: + +.. code-block:: console + + # bpftool gen skeleton my_prog.o > my_prog.skel.h + +and the program can be loaded by including ``my_prog.skel.h`` and using +the generated helper, ``my_prog__open_and_load``. + +Attachment to LSM Hooks +----------------------- + +The LSM allows attachment of eBPF programs as LSM hooks using :manpage:`bpf(2)` +syscall's ``BPF_RAW_TRACEPOINT_OPEN`` operation or more simply by +using the libbpf helper ``bpf_program__attach_lsm``. + +The program can be detached from the LSM hook by *destroying* the ``link`` +link returned by ``bpf_program__attach_lsm`` using ``bpf_link__destroy``. + +One can also use the helpers generated in ``my_prog.skel.h`` i.e. +``my_prog__attach`` for attachment and ``my_prog__destroy`` for cleaning up. + +Examples +-------- + +An example eBPF program can be found in +`tools/testing/selftests/bpf/progs/lsm.c`_ and the corresponding +userspace code in `tools/testing/selftests/bpf/prog_tests/test_lsm.c`_ + +.. Links +.. _tools/lib/bpf/bpf_tracing.h: + https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/tools/lib/bpf/bpf_tracing.h +.. _tools/testing/selftests/bpf/progs/lsm.c: + https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/tools/testing/selftests/bpf/progs/lsm.c +.. _tools/testing/selftests/bpf/prog_tests/test_lsm.c: + https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/tools/testing/selftests/bpf/prog_tests/test_lsm.c -- cgit v1.2.3