From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- Documentation/bpf/s390.rst | 205 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 205 insertions(+) create mode 100644 Documentation/bpf/s390.rst (limited to 'Documentation/bpf/s390.rst') diff --git a/Documentation/bpf/s390.rst b/Documentation/bpf/s390.rst new file mode 100644 index 000000000..21ecb309d --- /dev/null +++ b/Documentation/bpf/s390.rst @@ -0,0 +1,205 @@ +=================== +Testing BPF on s390 +=================== + +1. Introduction +*************** + +IBM Z are mainframe computers, which are descendants of IBM System/360 from +year 1964. They are supported by the Linux kernel under the name "s390". This +document describes how to test BPF in an s390 QEMU guest. + +2. One-time setup +***************** + +The following is required to build and run the test suite: + + * s390 GCC + * s390 development headers and libraries + * Clang with BPF support + * QEMU with s390 support + * Disk image with s390 rootfs + +Debian supports installing compiler and libraries for s390 out of the box. +Users of other distros may use debootstrap in order to set up a Debian chroot:: + + sudo debootstrap \ + --variant=minbase \ + --include=sudo \ + testing \ + ./s390-toolchain + sudo mount --rbind /dev ./s390-toolchain/dev + sudo mount --rbind /proc ./s390-toolchain/proc + sudo mount --rbind /sys ./s390-toolchain/sys + sudo chroot ./s390-toolchain + +Once on Debian, the build prerequisites can be installed as follows:: + + sudo dpkg --add-architecture s390x + sudo apt-get update + sudo apt-get install \ + bc \ + bison \ + cmake \ + debootstrap \ + dwarves \ + flex \ + g++ \ + gcc \ + g++-s390x-linux-gnu \ + gcc-s390x-linux-gnu \ + gdb-multiarch \ + git \ + make \ + python3 \ + qemu-system-misc \ + qemu-utils \ + rsync \ + libcap-dev:s390x \ + libelf-dev:s390x \ + libncurses-dev + +Latest Clang targeting BPF can be installed as follows:: + + git clone https://github.com/llvm/llvm-project.git + ln -s ../../clang llvm-project/llvm/tools/ + mkdir llvm-project-build + cd llvm-project-build + cmake \ + -DLLVM_TARGETS_TO_BUILD=BPF \ + -DCMAKE_BUILD_TYPE=Release \ + -DCMAKE_INSTALL_PREFIX=/opt/clang-bpf \ + ../llvm-project/llvm + make + sudo make install + export PATH=/opt/clang-bpf/bin:$PATH + +The disk image can be prepared using a loopback mount and debootstrap:: + + qemu-img create -f raw ./s390.img 1G + sudo losetup -f ./s390.img + sudo mkfs.ext4 /dev/loopX + mkdir ./s390.rootfs + sudo mount /dev/loopX ./s390.rootfs + sudo debootstrap \ + --foreign \ + --arch=s390x \ + --variant=minbase \ + --include=" \ + iproute2, \ + iputils-ping, \ + isc-dhcp-client, \ + kmod, \ + libcap2, \ + libelf1, \ + netcat, \ + procps" \ + testing \ + ./s390.rootfs + sudo umount ./s390.rootfs + sudo losetup -d /dev/loopX + +3. Compilation +************** + +In addition to the usual Kconfig options required to run the BPF test suite, it +is also helpful to select:: + + CONFIG_NET_9P=y + CONFIG_9P_FS=y + CONFIG_NET_9P_VIRTIO=y + CONFIG_VIRTIO_PCI=y + +as that would enable a very easy way to share files with the s390 virtual +machine. + +Compiling kernel, modules and testsuite, as well as preparing gdb scripts to +simplify debugging, can be done using the following commands:: + + make ARCH=s390 CROSS_COMPILE=s390x-linux-gnu- menuconfig + make ARCH=s390 CROSS_COMPILE=s390x-linux-gnu- bzImage modules scripts_gdb + make ARCH=s390 CROSS_COMPILE=s390x-linux-gnu- \ + -C tools/testing/selftests \ + TARGETS=bpf \ + INSTALL_PATH=$PWD/tools/testing/selftests/kselftest_install \ + install + +4. Running the test suite +************************* + +The virtual machine can be started as follows:: + + qemu-system-s390x \ + -cpu max,zpci=on \ + -smp 2 \ + -m 4G \ + -kernel linux/arch/s390/boot/compressed/vmlinux \ + -drive file=./s390.img,if=virtio,format=raw \ + -nographic \ + -append 'root=/dev/vda rw console=ttyS1' \ + -virtfs local,path=./linux,security_model=none,mount_tag=linux \ + -object rng-random,filename=/dev/urandom,id=rng0 \ + -device virtio-rng-ccw,rng=rng0 \ + -netdev user,id=net0 \ + -device virtio-net-ccw,netdev=net0 + +When using this on a real IBM Z, ``-enable-kvm`` may be added for better +performance. When starting the virtual machine for the first time, disk image +setup must be finalized using the following command:: + + /debootstrap/debootstrap --second-stage + +Directory with the code built on the host as well as ``/proc`` and ``/sys`` +need to be mounted as follows:: + + mkdir -p /linux + mount -t 9p linux /linux + mount -t proc proc /proc + mount -t sysfs sys /sys + +After that, the test suite can be run using the following commands:: + + cd /linux/tools/testing/selftests/kselftest_install + ./run_kselftest.sh + +As usual, tests can be also run individually:: + + cd /linux/tools/testing/selftests/bpf + ./test_verifier + +5. Debugging +************ + +It is possible to debug the s390 kernel using QEMU GDB stub, which is activated +by passing ``-s`` to QEMU. + +It is preferable to turn KASLR off, so that gdb would know where to find the +kernel image in memory, by building the kernel with:: + + RANDOMIZE_BASE=n + +GDB can then be attached using the following command:: + + gdb-multiarch -ex 'target remote localhost:1234' ./vmlinux + +6. Network +********** + +In case one needs to use the network in the virtual machine in order to e.g. +install additional packages, it can be configured using:: + + dhclient eth0 + +7. Links +******** + +This document is a compilation of techniques, whose more comprehensive +descriptions can be found by following these links: + +- `Debootstrap `_ +- `Multiarch `_ +- `Building LLVM `_ +- `Cross-compiling the kernel `_ +- `QEMU s390x Guest Support `_ +- `Plan 9 folder sharing over Virtio `_ +- `Using GDB with QEMU `_ -- cgit v1.2.3