From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- Documentation/dev-tools/kmsan.rst | 428 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 428 insertions(+) create mode 100644 Documentation/dev-tools/kmsan.rst (limited to 'Documentation/dev-tools/kmsan.rst') diff --git a/Documentation/dev-tools/kmsan.rst b/Documentation/dev-tools/kmsan.rst new file mode 100644 index 000000000..55fa82212 --- /dev/null +++ b/Documentation/dev-tools/kmsan.rst @@ -0,0 +1,428 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. Copyright (C) 2022, Google LLC. + +=================================== +The Kernel Memory Sanitizer (KMSAN) +=================================== + +KMSAN is a dynamic error detector aimed at finding uses of uninitialized +values. It is based on compiler instrumentation, and is quite similar to the +userspace `MemorySanitizer tool`_. + +An important note is that KMSAN is not intended for production use, because it +drastically increases kernel memory footprint and slows the whole system down. + +Usage +===== + +Building the kernel +------------------- + +In order to build a kernel with KMSAN you will need a fresh Clang (14.0.6+). +Please refer to `LLVM documentation`_ for the instructions on how to build Clang. + +Now configure and build the kernel with CONFIG_KMSAN enabled. + +Example report +-------------- + +Here is an example of a KMSAN report:: + + ===================================================== + BUG: KMSAN: uninit-value in test_uninit_kmsan_check_memory+0x1be/0x380 [kmsan_test] + test_uninit_kmsan_check_memory+0x1be/0x380 mm/kmsan/kmsan_test.c:273 + kunit_run_case_internal lib/kunit/test.c:333 + kunit_try_run_case+0x206/0x420 lib/kunit/test.c:374 + kunit_generic_run_threadfn_adapter+0x6d/0xc0 lib/kunit/try-catch.c:28 + kthread+0x721/0x850 kernel/kthread.c:327 + ret_from_fork+0x1f/0x30 ??:? + + Uninit was stored to memory at: + do_uninit_local_array+0xfa/0x110 mm/kmsan/kmsan_test.c:260 + test_uninit_kmsan_check_memory+0x1a2/0x380 mm/kmsan/kmsan_test.c:271 + kunit_run_case_internal lib/kunit/test.c:333 + kunit_try_run_case+0x206/0x420 lib/kunit/test.c:374 + kunit_generic_run_threadfn_adapter+0x6d/0xc0 lib/kunit/try-catch.c:28 + kthread+0x721/0x850 kernel/kthread.c:327 + ret_from_fork+0x1f/0x30 ??:? + + Local variable uninit created at: + do_uninit_local_array+0x4a/0x110 mm/kmsan/kmsan_test.c:256 + test_uninit_kmsan_check_memory+0x1a2/0x380 mm/kmsan/kmsan_test.c:271 + + Bytes 4-7 of 8 are uninitialized + Memory access of size 8 starts at ffff888083fe3da0 + + CPU: 0 PID: 6731 Comm: kunit_try_catch Tainted: G B E 5.16.0-rc3+ #104 + Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 + ===================================================== + +The report says that the local variable ``uninit`` was created uninitialized in +``do_uninit_local_array()``. The third stack trace corresponds to the place +where this variable was created. + +The first stack trace shows where the uninit value was used (in +``test_uninit_kmsan_check_memory()``). The tool shows the bytes which were left +uninitialized in the local variable, as well as the stack where the value was +copied to another memory location before use. + +A use of uninitialized value ``v`` is reported by KMSAN in the following cases: + + - in a condition, e.g. ``if (v) { ... }``; + - in an indexing or pointer dereferencing, e.g. ``array[v]`` or ``*v``; + - when it is copied to userspace or hardware, e.g. ``copy_to_user(..., &v, ...)``; + - when it is passed as an argument to a function, and + ``CONFIG_KMSAN_CHECK_PARAM_RETVAL`` is enabled (see below). + +The mentioned cases (apart from copying data to userspace or hardware, which is +a security issue) are considered undefined behavior from the C11 Standard point +of view. + +Disabling the instrumentation +----------------------------- + +A function can be marked with ``__no_kmsan_checks``. Doing so makes KMSAN +ignore uninitialized values in that function and mark its output as initialized. +As a result, the user will not get KMSAN reports related to that function. + +Another function attribute supported by KMSAN is ``__no_sanitize_memory``. +Applying this attribute to a function will result in KMSAN not instrumenting +it, which can be helpful if we do not want the compiler to interfere with some +low-level code (e.g. that marked with ``noinstr`` which implicitly adds +``__no_sanitize_memory``). + +This however comes at a cost: stack allocations from such functions will have +incorrect shadow/origin values, likely leading to false positives. Functions +called from non-instrumented code may also receive incorrect metadata for their +parameters. + +As a rule of thumb, avoid using ``__no_sanitize_memory`` explicitly. + +It is also possible to disable KMSAN for a single file (e.g. main.o):: + + KMSAN_SANITIZE_main.o := n + +or for the whole directory:: + + KMSAN_SANITIZE := n + +in the Makefile. Think of this as applying ``__no_sanitize_memory`` to every +function in the file or directory. Most users won't need KMSAN_SANITIZE, unless +their code gets broken by KMSAN (e.g. runs at early boot time). + +Support +======= + +In order for KMSAN to work the kernel must be built with Clang, which so far is +the only compiler that has KMSAN support. The kernel instrumentation pass is +based on the userspace `MemorySanitizer tool`_. + +The runtime library only supports x86_64 at the moment. + +How KMSAN works +=============== + +KMSAN shadow memory +------------------- + +KMSAN associates a metadata byte (also called shadow byte) with every byte of +kernel memory. A bit in the shadow byte is set iff the corresponding bit of the +kernel memory byte is uninitialized. Marking the memory uninitialized (i.e. +setting its shadow bytes to ``0xff``) is called poisoning, marking it +initialized (setting the shadow bytes to ``0x00``) is called unpoisoning. + +When a new variable is allocated on the stack, it is poisoned by default by +instrumentation code inserted by the compiler (unless it is a stack variable +that is immediately initialized). Any new heap allocation done without +``__GFP_ZERO`` is also poisoned. + +Compiler instrumentation also tracks the shadow values as they are used along +the code. When needed, instrumentation code invokes the runtime library in +``mm/kmsan/`` to persist shadow values. + +The shadow value of a basic or compound type is an array of bytes of the same +length. When a constant value is written into memory, that memory is unpoisoned. +When a value is read from memory, its shadow memory is also obtained and +propagated into all the operations which use that value. For every instruction +that takes one or more values the compiler generates code that calculates the +shadow of the result depending on those values and their shadows. + +Example:: + + int a = 0xff; // i.e. 0x000000ff + int b; + int c = a | b; + +In this case the shadow of ``a`` is ``0``, shadow of ``b`` is ``0xffffffff``, +shadow of ``c`` is ``0xffffff00``. This means that the upper three bytes of +``c`` are uninitialized, while the lower byte is initialized. + +Origin tracking +--------------- + +Every four bytes of kernel memory also have a so-called origin mapped to them. +This origin describes the point in program execution at which the uninitialized +value was created. Every origin is associated with either the full allocation +stack (for heap-allocated memory), or the function containing the uninitialized +variable (for locals). + +When an uninitialized variable is allocated on stack or heap, a new origin +value is created, and that variable's origin is filled with that value. When a +value is read from memory, its origin is also read and kept together with the +shadow. For every instruction that takes one or more values, the origin of the +result is one of the origins corresponding to any of the uninitialized inputs. +If a poisoned value is written into memory, its origin is written to the +corresponding storage as well. + +Example 1:: + + int a = 42; + int b; + int c = a + b; + +In this case the origin of ``b`` is generated upon function entry, and is +stored to the origin of ``c`` right before the addition result is written into +memory. + +Several variables may share the same origin address, if they are stored in the +same four-byte chunk. In this case every write to either variable updates the +origin for all of them. We have to sacrifice precision in this case, because +storing origins for individual bits (and even bytes) would be too costly. + +Example 2:: + + int combine(short a, short b) { + union ret_t { + int i; + short s[2]; + } ret; + ret.s[0] = a; + ret.s[1] = b; + return ret.i; + } + +If ``a`` is initialized and ``b`` is not, the shadow of the result would be +0xffff0000, and the origin of the result would be the origin of ``b``. +``ret.s[0]`` would have the same origin, but it will never be used, because +that variable is initialized. + +If both function arguments are uninitialized, only the origin of the second +argument is preserved. + +Origin chaining +~~~~~~~~~~~~~~~ + +To ease debugging, KMSAN creates a new origin for every store of an +uninitialized value to memory. The new origin references both its creation stack +and the previous origin the value had. This may cause increased memory +consumption, so we limit the length of origin chains in the runtime. + +Clang instrumentation API +------------------------- + +Clang instrumentation pass inserts calls to functions defined in +``mm/kmsan/nstrumentation.c`` into the kernel code. + +Shadow manipulation +~~~~~~~~~~~~~~~~~~~ + +For every memory access the compiler emits a call to a function that returns a +pair of pointers to the shadow and origin addresses of the given memory:: + + typedef struct { + void *shadow, *origin; + } shadow_origin_ptr_t + + shadow_origin_ptr_t __msan_metadata_ptr_for_load_{1,2,4,8}(void *addr) + shadow_origin_ptr_t __msan_metadata_ptr_for_store_{1,2,4,8}(void *addr) + shadow_origin_ptr_t __msan_metadata_ptr_for_load_n(void *addr, uintptr_t size) + shadow_origin_ptr_t __msan_metadata_ptr_for_store_n(void *addr, uintptr_t size) + +The function name depends on the memory access size. + +The compiler makes sure that for every loaded value its shadow and origin +values are read from memory. When a value is stored to memory, its shadow and +origin are also stored using the metadata pointers. + +Handling locals +~~~~~~~~~~~~~~~ + +A special function is used to create a new origin value for a local variable and +set the origin of that variable to that value:: + + void __msan_poison_alloca(void *addr, uintptr_t size, char *descr) + +Access to per-task data +~~~~~~~~~~~~~~~~~~~~~~~ + +At the beginning of every instrumented function KMSAN inserts a call to +``__msan_get_context_state()``:: + + kmsan_context_state *__msan_get_context_state(void) + +``kmsan_context_state`` is declared in ``include/linux/kmsan.h``:: + + struct kmsan_context_state { + char param_tls[KMSAN_PARAM_SIZE]; + char retval_tls[KMSAN_RETVAL_SIZE]; + char va_arg_tls[KMSAN_PARAM_SIZE]; + char va_arg_origin_tls[KMSAN_PARAM_SIZE]; + u64 va_arg_overflow_size_tls; + char param_origin_tls[KMSAN_PARAM_SIZE]; + depot_stack_handle_t retval_origin_tls; + }; + +This structure is used by KMSAN to pass parameter shadows and origins between +instrumented functions (unless the parameters are checked immediately by +``CONFIG_KMSAN_CHECK_PARAM_RETVAL``). + +Passing uninitialized values to functions +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Clang's MemorySanitizer instrumentation has an option, +``-fsanitize-memory-param-retval``, which makes the compiler check function +parameters passed by value, as well as function return values. + +The option is controlled by ``CONFIG_KMSAN_CHECK_PARAM_RETVAL``, which is +enabled by default to let KMSAN report uninitialized values earlier. +Please refer to the `LKML discussion`_ for more details. + +Because of the way the checks are implemented in LLVM (they are only applied to +parameters marked as ``noundef``), not all parameters are guaranteed to be +checked, so we cannot give up the metadata storage in ``kmsan_context_state``. + +String functions +~~~~~~~~~~~~~~~~ + +The compiler replaces calls to ``memcpy()``/``memmove()``/``memset()`` with the +following functions. These functions are also called when data structures are +initialized or copied, making sure shadow and origin values are copied alongside +with the data:: + + void *__msan_memcpy(void *dst, void *src, uintptr_t n) + void *__msan_memmove(void *dst, void *src, uintptr_t n) + void *__msan_memset(void *dst, int c, uintptr_t n) + +Error reporting +~~~~~~~~~~~~~~~ + +For each use of a value the compiler emits a shadow check that calls +``__msan_warning()`` in the case that value is poisoned:: + + void __msan_warning(u32 origin) + +``__msan_warning()`` causes KMSAN runtime to print an error report. + +Inline assembly instrumentation +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +KMSAN instruments every inline assembly output with a call to:: + + void __msan_instrument_asm_store(void *addr, uintptr_t size) + +, which unpoisons the memory region. + +This approach may mask certain errors, but it also helps to avoid a lot of +false positives in bitwise operations, atomics etc. + +Sometimes the pointers passed into inline assembly do not point to valid memory. +In such cases they are ignored at runtime. + + +Runtime library +--------------- + +The code is located in ``mm/kmsan/``. + +Per-task KMSAN state +~~~~~~~~~~~~~~~~~~~~ + +Every task_struct has an associated KMSAN task state that holds the KMSAN +context (see above) and a per-task flag disallowing KMSAN reports:: + + struct kmsan_context { + ... + bool allow_reporting; + struct kmsan_context_state cstate; + ... + } + + struct task_struct { + ... + struct kmsan_context kmsan; + ... + } + +KMSAN contexts +~~~~~~~~~~~~~~ + +When running in a kernel task context, KMSAN uses ``current->kmsan.cstate`` to +hold the metadata for function parameters and return values. + +But in the case the kernel is running in the interrupt, softirq or NMI context, +where ``current`` is unavailable, KMSAN switches to per-cpu interrupt state:: + + DEFINE_PER_CPU(struct kmsan_ctx, kmsan_percpu_ctx); + +Metadata allocation +~~~~~~~~~~~~~~~~~~~ + +There are several places in the kernel for which the metadata is stored. + +1. Each ``struct page`` instance contains two pointers to its shadow and +origin pages:: + + struct page { + ... + struct page *shadow, *origin; + ... + }; + +At boot-time, the kernel allocates shadow and origin pages for every available +kernel page. This is done quite late, when the kernel address space is already +fragmented, so normal data pages may arbitrarily interleave with the metadata +pages. + +This means that in general for two contiguous memory pages their shadow/origin +pages may not be contiguous. Consequently, if a memory access crosses the +boundary of a memory block, accesses to shadow/origin memory may potentially +corrupt other pages or read incorrect values from them. + +In practice, contiguous memory pages returned by the same ``alloc_pages()`` +call will have contiguous metadata, whereas if these pages belong to two +different allocations their metadata pages can be fragmented. + +For the kernel data (``.data``, ``.bss`` etc.) and percpu memory regions +there also are no guarantees on metadata contiguity. + +In the case ``__msan_metadata_ptr_for_XXX_YYY()`` hits the border between two +pages with non-contiguous metadata, it returns pointers to fake shadow/origin regions:: + + char dummy_load_page[PAGE_SIZE] __attribute__((aligned(PAGE_SIZE))); + char dummy_store_page[PAGE_SIZE] __attribute__((aligned(PAGE_SIZE))); + +``dummy_load_page`` is zero-initialized, so reads from it always yield zeroes. +All stores to ``dummy_store_page`` are ignored. + +2. For vmalloc memory and modules, there is a direct mapping between the memory +range, its shadow and origin. KMSAN reduces the vmalloc area by 3/4, making only +the first quarter available to ``vmalloc()``. The second quarter of the vmalloc +area contains shadow memory for the first quarter, the third one holds the +origins. A small part of the fourth quarter contains shadow and origins for the +kernel modules. Please refer to ``arch/x86/include/asm/pgtable_64_types.h`` for +more details. + +When an array of pages is mapped into a contiguous virtual memory space, their +shadow and origin pages are similarly mapped into contiguous regions. + +References +========== + +E. Stepanov, K. Serebryany. `MemorySanitizer: fast detector of uninitialized +memory use in C++ +`_. +In Proceedings of CGO 2015. + +.. _MemorySanitizer tool: https://clang.llvm.org/docs/MemorySanitizer.html +.. _LLVM documentation: https://llvm.org/docs/GettingStarted.html +.. _LKML discussion: https://lore.kernel.org/all/20220614144853.3693273-1-glider@google.com/ -- cgit v1.2.3