From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../devicetree/bindings/arm/bcm/bcm2835.yaml | 59 +++++ .../devicetree/bindings/arm/bcm/brcm,bcm11351.yaml | 23 ++ .../devicetree/bindings/arm/bcm/brcm,bcm21664.yaml | 23 ++ .../devicetree/bindings/arm/bcm/brcm,bcm23550.yaml | 23 ++ .../devicetree/bindings/arm/bcm/brcm,bcm4708.yaml | 108 +++++++++ .../devicetree/bindings/arm/bcm/brcm,bcm63138.txt | 85 +++++++ .../devicetree/bindings/arm/bcm/brcm,bcmbca.yaml | 151 ++++++++++++ .../devicetree/bindings/arm/bcm/brcm,brcmstb.txt | 258 +++++++++++++++++++++ .../devicetree/bindings/arm/bcm/brcm,cygnus.yaml | 31 +++ .../devicetree/bindings/arm/bcm/brcm,hr2.yaml | 30 +++ .../devicetree/bindings/arm/bcm/brcm,ns2.yaml | 25 ++ .../devicetree/bindings/arm/bcm/brcm,nsp.yaml | 83 +++++++ .../devicetree/bindings/arm/bcm/brcm,stingray.yaml | 26 +++ .../bindings/arm/bcm/brcm,vulcan-soc.yaml | 24 ++ .../arm/bcm/raspberrypi,bcm2835-firmware.yaml | 108 +++++++++ 15 files changed, 1057 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml create mode 100644 Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml (limited to 'Documentation/devicetree/bindings/arm/bcm') diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml new file mode 100644 index 000000000..162a39dab --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/bcm2835.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM2711/BCM2835 Platforms + +maintainers: + - Eric Anholt + - Stefan Wahren + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: BCM2711 based Boards + items: + - enum: + - raspberrypi,400 + - raspberrypi,4-compute-module + - raspberrypi,4-model-b + - const: brcm,bcm2711 + + - description: BCM2835 based Boards + items: + - enum: + - raspberrypi,model-a + - raspberrypi,model-a-plus + - raspberrypi,model-b + - raspberrypi,model-b-i2c0 # Raspberry Pi Model B (no P5) + - raspberrypi,model-b-rev2 + - raspberrypi,model-b-plus + - raspberrypi,compute-module + - raspberrypi,model-zero + - raspberrypi,model-zero-w + - const: brcm,bcm2835 + + - description: BCM2836 based Boards + items: + - enum: + - raspberrypi,2-model-b + - const: brcm,bcm2836 + + - description: BCM2837 based Boards + items: + - enum: + - raspberrypi,3-model-a-plus + - raspberrypi,3-model-b + - raspberrypi,3-model-b-plus + - raspberrypi,3-compute-module + - raspberrypi,3-compute-module-lite + - raspberrypi,model-zero-2-w + - const: brcm,bcm2837 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml new file mode 100644 index 000000000..f2bcac009 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml @@ -0,0 +1,23 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm11351.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM11351 + +maintainers: + - Florian Fainelli + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - brcm,bcm28155-ap + - const: brcm,bcm11351 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml new file mode 100644 index 000000000..cf4e254e3 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml @@ -0,0 +1,23 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm21664.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM21664 + +maintainers: + - Florian Fainelli + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - brcm,bcm21664-garnet + - const: brcm,bcm21664 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml new file mode 100644 index 000000000..eafec29ba --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml @@ -0,0 +1,23 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm23550.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM23550 + +maintainers: + - Florian Fainelli + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - brcm,bcm23550-sparrow + - const: brcm,bcm23550 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml new file mode 100644 index 000000000..454b0e932 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm4708.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM4708 + +description: + Broadcom BCM4708/47081/4709/47094/53012 Wi-Fi/network SoCs based + on the iProc architecture (Northstar). + +maintainers: + - Florian Fainelli + - Hauke Mehrtens + - Rafal Milecki + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: BCM4708 based boards + items: + - enum: + - asus,rt-ac56u + - asus,rt-ac68u + - buffalo,wzr-1750dhp + - linksys,ea6300-v1 + - linksys,ea6500-v2 + - luxul,xap-1510v1 + - luxul,xwc-1000 + - netgear,r6250v1 + - netgear,r6300v2 + - smartrg,sr400ac + - brcm,bcm94708 + - const: brcm,bcm4708 + + - description: BCM47081 based boards + items: + - enum: + - asus,rt-n18u + - buffalo,wzr-600dhp2 + - buffalo,wzr-900dhp + - luxul,xap-1410v1 + - luxul,xwr-1200v1 + - tplink,archer-c5-v2 + - const: brcm,bcm47081 + - const: brcm,bcm4708 + + - description: BCM4709 based boards + items: + - enum: + - asus,rt-ac87u + - buffalo,wxr-1900dhp + - linksys,ea9200 + - netgear,r7000 + - netgear,r8000 + - tplink,archer-c9-v1 + - brcm,bcm94709 + - const: brcm,bcm4709 + - const: brcm,bcm4708 + + - description: BCM47094 based boards + items: + - enum: + - asus,rt-ac88u + - dlink,dir-885l + - dlink,dir-890l + - linksys,panamera + - luxul,abr-4500-v1 + - luxul,xap-1610-v1 + - luxul,xbr-4500-v1 + - luxul,xwc-2000-v1 + - luxul,xwr-3100v1 + - luxul,xwr-3150-v1 + - netgear,r8500 + - phicomm,k3 + - const: brcm,bcm47094 + - const: brcm,bcm4708 + + - description: BCM53012 based boards + items: + - enum: + - brcm,bcm953012er + - brcm,bcm953012hr + - brcm,bcm953012k + - const: brcm,bcm53012 + - const: brcm,bcm4708 + + - description: BCM53015 based boards + items: + - enum: + - meraki,mr26 + - const: brcm,bcm53015 + - const: brcm,bcm4708 + + - description: BCM53016 based boards + items: + - enum: + - dlink,dwl-8610ap + - meraki,mr32 + - const: brcm,bcm53016 + - const: brcm,bcm4708 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt new file mode 100644 index 000000000..a8866c6e9 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt @@ -0,0 +1,85 @@ +Broadcom BCM63138 DSL System-on-a-Chip device tree bindings +----------------------------------------------------------- + +Boards compatible with the BCM63138 DSL System-on-a-Chip should have the +following properties: + +Required root node property: + +compatible: should be "brcm,bcm63138" + +An optional Boot lookup table Device Tree node is required for secondary CPU +initialization as well as a 'resets' phandle to the correct PMB controller as +defined in reset/brcm,bcm63138-pmb.txt for this secondary CPU, and an +'enable-method' property. + +Required properties for the Boot lookup table node: +- compatible: should be "brcm,bcm63138-bootlut" +- reg: register base address and length for the Boot Lookup table + +Optional properties for the primary CPU node: +- enable-method: should be "brcm,bcm63138" + +Optional properties for the secondary CPU node: +- enable-method: should be "brcm,bcm63138" +- resets: phandle to the relevant PMB controller, one integer indicating the internal + bus number, and a second integer indicating the address of the CPU in the PMB + internal bus number. + +Example: + + cpus { + cpu@0 { + compatible = "arm,cortex-a9"; + reg = <0>; + ... + enable-method = "brcm,bcm63138"; + }; + + cpu@1 { + compatible = "arm,cortex-a9"; + reg = <1>; + ... + enable-method = "brcm,bcm63138"; + resets = <&pmb0 4 1>; + }; + }; + + bootlut: bootlut@8000 { + compatible = "brcm,bcm63138-bootlut"; + reg = <0x8000 0x50>; + }; + +======= +reboot +------ +Two nodes are required for software reboot: a timer node and a syscon-reboot node. + +Timer node: + +- compatible: Must be "brcm,bcm6328-timer", "syscon" +- reg: Register base address and length + +Syscon reboot node: + +See Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml for the +detailed list of properties, the two values defined below are specific to the +BCM6328-style timer: + +- offset: Should be 0x34 to denote the offset of the TIMER_WD_TIMER_RESET register + from the beginning of the TIMER block +- mask: Should be 1 for the SoftRst bit. + +Example: + + timer: timer@80 { + compatible = "brcm,bcm6328-timer", "syscon"; + reg = <0x80 0x3c>; + }; + + reboot { + compatible = "syscon-reboot"; + regmap = <&timer>; + offset = <0x34>; + mask = <0x1>; + }; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml new file mode 100644 index 000000000..07892cbdd --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml @@ -0,0 +1,151 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,bcmbca.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Broadband SoC + +description: + Broadcom Broadband SoCs include family of high performance DSL/PON/Wireless + chips that can be used as home gateway, router and WLAN AP for residential, + enterprise and carrier applications. + +maintainers: + - William Zhang + - Anand Gore + - Kursad Oney + - Rafał Miłecki + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: BCM47622 based boards + items: + - enum: + - brcm,bcm947622 + - const: brcm,bcm47622 + - const: brcm,bcmbca + + - description: BCM4906 based boards + items: + - enum: + - netgear,r8000p + - tplink,archer-c2300-v1 + - const: brcm,bcm4906 + - const: brcm,bcm4908 + - const: brcm,bcmbca + + - description: BCM4908 based boards + items: + - enum: + - asus,gt-ac5300 + - brcm,bcm94908 + - netgear,raxe500 + - const: brcm,bcm4908 + - const: brcm,bcmbca + + - description: BCM49408 based boards + items: + - const: brcm,bcm49408 + - const: brcm,bcm4908 + - const: brcm,bcmbca + + - description: BCM4912 based boards + items: + - enum: + - asus,gt-ax6000 + - brcm,bcm94912 + - const: brcm,bcm4912 + - const: brcm,bcmbca + + - description: BCM63138 based boards + items: + - enum: + - brcm,bcm963138 + - brcm,BCM963138DVT + - const: brcm,bcm63138 + - const: brcm,bcmbca + + - description: BCM63146 based boards + items: + - enum: + - brcm,bcm963146 + - const: brcm,bcm63146 + - const: brcm,bcmbca + + - description: BCM63148 based boards + items: + - enum: + - brcm,bcm963148 + - const: brcm,bcm63148 + - const: brcm,bcmbca + + - description: BCM63158 based boards + items: + - enum: + - brcm,bcm963158 + - const: brcm,bcm63158 + - const: brcm,bcmbca + + - description: BCM63178 based boards + items: + - enum: + - brcm,bcm963178 + - const: brcm,bcm63178 + - const: brcm,bcmbca + + - description: BCM6756 based boards + items: + - enum: + - brcm,bcm96756 + - const: brcm,bcm6756 + - const: brcm,bcmbca + + - description: BCM6813 based boards + items: + - enum: + - brcm,bcm96813 + - const: brcm,bcm6813 + - const: brcm,bcmbca + + - description: BCM6846 based boards + items: + - enum: + - brcm,bcm96846 + - const: brcm,bcm6846 + - const: brcm,bcmbca + + - description: BCM6855 based boards + items: + - enum: + - brcm,bcm96855 + - const: brcm,bcm6855 + - const: brcm,bcmbca + + - description: BCM6856 based boards + items: + - enum: + - brcm,bcm96856 + - const: brcm,bcm6856 + - const: brcm,bcmbca + + - description: BCM6858 based boards + items: + - enum: + - brcm,bcm96858 + - const: brcm,bcm6858 + - const: brcm,bcmbca + + - description: BCM6878 based boards + items: + - enum: + - brcm,bcm96878 + - const: brcm,bcm6878 + - const: brcm,bcmbca + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt new file mode 100644 index 000000000..071421dbc --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt @@ -0,0 +1,258 @@ +ARM Broadcom STB platforms Device Tree Bindings +----------------------------------------------- +Boards with Broadcom Brahma15 ARM-based BCMxxxx (generally BCM7xxx variants) +SoC shall have the following DT organization: + +Required root node properties: + - compatible: "brcm,bcm", "brcm,brcmstb" + +example: +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "Broadcom STB (bcm7445)"; + compatible = "brcm,bcm7445", "brcm,brcmstb"; + +Further, syscon nodes that map platform-specific registers used for general +system control is required: + + - compatible: "brcm,bcm-sun-top-ctrl", "syscon" + - compatible: "brcm,bcm-cpu-biu-ctrl", + "brcm,brcmstb-cpu-biu-ctrl", + "syscon" + - compatible: "brcm,bcm-hif-continuation", "syscon" + +cpu-biu-ctrl node +------------------- +SoCs with Broadcom Brahma15 ARM-based and Brahma53 ARM64-based CPUs have a +specific Bus Interface Unit (BIU) block which controls and interfaces the CPU +complex to the different Memory Controller Ports (MCP), one per memory +controller (MEMC). This BIU block offers a feature called Write Pairing which +consists in collapsing two adjacent cache lines into a single (bursted) write +transaction towards the memory controller (MEMC) to maximize write bandwidth. + +Required properties: + + - compatible: must be "brcm,bcm7445-cpu-biu-ctrl", "brcm,brcmstb-cpu-biu-ctrl", "syscon" + +Optional properties: + + - brcm,write-pairing: + Boolean property, which when present indicates that the chip + supports write-pairing. + +example: + rdb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0x00 0xf0000000 0x1000000>; + + sun_top_ctrl: syscon@404000 { + compatible = "brcm,bcm7445-sun-top-ctrl", "syscon"; + reg = <0x404000 0x51c>; + }; + + hif_cpubiuctrl: syscon@3e2400 { + compatible = "brcm,bcm7445-cpu-biu-ctrl", "brcm,brcmstb-cpu-biu-ctrl", "syscon"; + reg = <0x3e2400 0x5b4>; + brcm,write-pairing; + }; + + hif_continuation: syscon@452000 { + compatible = "brcm,bcm7445-hif-continuation", "syscon"; + reg = <0x452000 0x100>; + }; + }; + +Nodes that allow for support of SMP initialization and reboot are required: + +smpboot +------- +Required properties: + + - compatible + The string "brcm,brcmstb-smpboot". + + - syscon-cpu + A phandle / integer array property which lets the BSP know the location + of certain CPU power-on registers. + + The layout of the property is as follows: + o a phandle to the "hif_cpubiuctrl" syscon node + o offset to the base CPU power zone register + o offset to the base CPU reset register + + - syscon-cont + A phandle pointing to the syscon node which describes the CPU boot + continuation registers. + o a phandle to the "hif_continuation" syscon node + +example: + smpboot { + compatible = "brcm,brcmstb-smpboot"; + syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>; + syscon-cont = <&hif_continuation>; + }; + +reboot +------- +Required properties + + - compatible + The string property "brcm,brcmstb-reboot" for 40nm/28nm chips with + the new SYS_CTRL interface, or "brcm,bcm7038-reboot" for 65nm + chips with the old SUN_TOP_CTRL interface. + + - syscon + A phandle / integer array that points to the syscon node which describes + the general system reset registers. + o a phandle to "sun_top_ctrl" + o offset to the "reset source enable" register + o offset to the "software master reset" register + +example: + reboot { + compatible = "brcm,brcmstb-reboot"; + syscon = <&sun_top_ctrl 0x304 0x308>; + }; + + + +Power management +---------------- + +For power management (particularly, S2/S3/S5 system suspend), the following SoC +components are needed: + += Always-On control block (AON CTRL) + +This hardware provides control registers for the "always-on" (even in low-power +modes) hardware, such as the Power Management State Machine (PMSM). + +Required properties: +- compatible : should contain "brcm,brcmstb-aon-ctrl" +- reg : the register start and length for the AON CTRL block + +Example: + +aon-ctrl@410000 { + compatible = "brcm,brcmstb-aon-ctrl"; + reg = <0x410000 0x400>; +}; + += Memory controllers + +A Broadcom STB SoC typically has a number of independent memory controllers, +each of which may have several associated hardware blocks, which are versioned +independently (control registers, DDR PHYs, etc.). One might consider +describing these controllers as a parent "memory controllers" block, which +contains N sub-nodes (one for each controller in the system), each of which is +associated with a number of hardware register resources (e.g., its PHY). See +the example device tree snippet below. + +== MEMC (MEMory Controller) + +Represents a single memory controller instance. + +Required properties: +- compatible : should contain "brcm,brcmstb-memc" and "simple-bus" + +Should contain subnodes for any of the following relevant hardware resources: + +== DDR PHY control + +Control registers for this memory controller's DDR PHY. + +Required properties: +- compatible : should contain one of these + "brcm,brcmstb-ddr-phy-v71.1" + "brcm,brcmstb-ddr-phy-v72.0" + "brcm,brcmstb-ddr-phy-v225.1" + "brcm,brcmstb-ddr-phy-v240.1" + "brcm,brcmstb-ddr-phy-v240.2" + +- reg : the DDR PHY register range + +== DDR SHIMPHY + +Control registers for this memory controller's DDR SHIMPHY. + +Required properties: +- compatible : should contain "brcm,brcmstb-ddr-shimphy-v1.0" +- reg : the DDR SHIMPHY register range + +== MEMC DDR control + +Sequencer DRAM parameters and control registers. Used for Self-Refresh +Power-Down (SRPD), among other things. + +See Documentation/devicetree/bindings/memory-controllers/brcm,brcmstb-memc-ddr.yaml for a +full list of supported compatible strings and properties. + +Example: + +memory_controllers { + ranges; + compatible = "simple-bus"; + + memc@0 { + compatible = "brcm,brcmstb-memc", "simple-bus"; + ranges; + + ddr-phy@f1106000 { + compatible = "brcm,brcmstb-ddr-phy-v240.1"; + reg = <0xf1106000 0x21c>; + }; + + shimphy@f1108000 { + compatible = "brcm,brcmstb-ddr-shimphy-v1.0"; + reg = <0xf1108000 0xe4>; + }; + + memc-ddr@f1102000 { + reg = <0xf1102000 0x800>; + compatible = "brcm,brcmstb-memc-ddr"; + }; + }; + + memc@1 { + compatible = "brcm,brcmstb-memc", "simple-bus"; + ranges; + + ddr-phy@f1186000 { + compatible = "brcm,brcmstb-ddr-phy-v240.1"; + reg = <0xf1186000 0x21c>; + }; + + shimphy@f1188000 { + compatible = "brcm,brcmstb-ddr-shimphy-v1.0"; + reg = <0xf1188000 0xe4>; + }; + + memc-ddr@f1182000 { + reg = <0xf1182000 0x800>; + compatible = "brcm,brcmstb-memc-ddr"; + }; + }; + + memc@2 { + compatible = "brcm,brcmstb-memc", "simple-bus"; + ranges; + + ddr-phy@f1206000 { + compatible = "brcm,brcmstb-ddr-phy-v240.1"; + reg = <0xf1206000 0x21c>; + }; + + shimphy@f1208000 { + compatible = "brcm,brcmstb-ddr-shimphy-v1.0"; + reg = <0xf1208000 0xe4>; + }; + + memc-ddr@f1202000 { + reg = <0xf1202000 0x800>; + compatible = "brcm,brcmstb-memc-ddr"; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml new file mode 100644 index 000000000..a0a3f32db --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,cygnus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Cygnus + +maintainers: + - Ray Jui + - Scott Branden + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - brcm,bcm11300 + - brcm,bcm11320 + - brcm,bcm11350 + - brcm,bcm11360 + - brcm,bcm58300 + - brcm,bcm58302 + - brcm,bcm58303 + - brcm,bcm58305 + - const: brcm,cygnus + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml new file mode 100644 index 000000000..cc6add0e9 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml @@ -0,0 +1,30 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,hr2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Hurricane 2 + +description: + Broadcom Hurricane 2 family of SoCs are used for switching control. These SoCs + are based on Broadcom's iProc SoC architecture and feature a single core Cortex + A9 ARM CPUs, DDR2/DDR3 memory, PCIe GEN-2, USB 2.0 and USB 3.0, serial and NAND + flash and a PCIe attached integrated switching engine. + +maintainers: + - Florian Fainelli + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - ubnt,unifi-switch8 + - const: brcm,bcm53342 + - const: brcm,hr2 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml new file mode 100644 index 000000000..6696598ec --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,ns2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom North Star 2 (NS2) + +maintainers: + - Ray Jui + - Scott Branden + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - brcm,ns2-svk + - brcm,ns2-xmc + - const: brcm,ns2 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml new file mode 100644 index 000000000..a43b2d4d9 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,nsp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Northstar Plus + +description: + Broadcom Northstar Plus family of SoCs are used for switching control + and management applications as well as residential router/gateway + applications. The SoC features dual core Cortex A9 ARM CPUs, integrating + several peripheral interfaces including multiple Gigabit Ethernet PHYs, + DDR3 memory, PCIE Gen-2, USB 2.0 and USB 3.0, serial and NAND flash, + SATA and several other IO controllers. + +maintainers: + - Ray Jui + - Scott Branden + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: BCM58522 based boards + items: + - enum: + - brcm,bcm958522er + - const: brcm,bcm58522 + - const: brcm,nsp + + - description: BCM58525 based boards + items: + - enum: + - brcm,bcm958525er + - brcm,bcm958525xmc + - const: brcm,bcm58525 + - const: brcm,nsp + + - description: BCM58535 based boards + items: + - const: brcm,bcm58535 + - const: brcm,nsp + + - description: BCM58622 based boards + items: + - enum: + - brcm,bcm958622hr + - const: brcm,bcm58622 + - const: brcm,nsp + + - description: BCM58623 based boards + items: + - enum: + - brcm,bcm958623hr + - const: brcm,bcm58623 + - const: brcm,nsp + + - description: BCM58625 based boards + items: + - enum: + - brcm,bcm958625hr + - brcm,bcm958625k + - meraki,mx64 + - meraki,mx64-a0 + - meraki,mx64w + - meraki,mx64w-a0 + - meraki,mx65 + - meraki,mx65w + - const: brcm,bcm58625 + - const: brcm,nsp + + - description: BCM88312 based boards + items: + - enum: + - brcm,bcm988312hr + - const: brcm,bcm88312 + - const: brcm,nsp + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml new file mode 100644 index 000000000..c6ccb78aa --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml @@ -0,0 +1,26 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,stingray.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Stingray + +maintainers: + - Ray Jui + - Scott Branden + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - brcm,bcm958742k + - brcm,bcm958742t + - brcm,bcm958802a802x + - const: brcm,stingray + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml new file mode 100644 index 000000000..3f441352f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml @@ -0,0 +1,24 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,vulcan-soc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Vulcan + +maintainers: + - Robert Richter + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - brcm,vulcan-eval + - cavium,thunderx2-cn9900 + - const: brcm,vulcan-soc + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml new file mode 100644 index 000000000..b369b374f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/raspberrypi,bcm2835-firmware.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Raspberry Pi VideoCore firmware driver + +maintainers: + - Eric Anholt + - Stefan Wahren + +select: + properties: + compatible: + contains: + const: raspberrypi,bcm2835-firmware + + required: + - compatible + +properties: + compatible: + items: + - const: raspberrypi,bcm2835-firmware + - const: simple-mfd + + mboxes: + maxItems: 1 + + clocks: + type: object + + properties: + compatible: + const: raspberrypi,firmware-clocks + + "#clock-cells": + const: 1 + description: > + The argument is the ID of the clocks contained by the + firmware messages. + + required: + - compatible + - "#clock-cells" + + reset: + type: object + + properties: + compatible: + const: raspberrypi,firmware-reset + + "#reset-cells": + const: 1 + description: > + The argument is the ID of the firmware reset line to affect. + + required: + - compatible + - "#reset-cells" + + pwm: + type: object + + properties: + compatible: + const: raspberrypi,firmware-poe-pwm + + "#pwm-cells": + # See pwm.yaml in this directory for a description of the cells format. + const: 2 + + required: + - compatible + - "#pwm-cells" + + additionalProperties: false + +required: + - compatible + - mboxes + +additionalProperties: false + +examples: + - | + firmware { + compatible = "raspberrypi,bcm2835-firmware", "simple-mfd"; + mboxes = <&mailbox>; + + firmware_clocks: clocks { + compatible = "raspberrypi,firmware-clocks"; + #clock-cells = <1>; + }; + + reset: reset { + compatible = "raspberrypi,firmware-reset"; + #reset-cells = <1>; + }; + + pwm: pwm { + compatible = "raspberrypi,firmware-poe-pwm"; + #pwm-cells = <2>; + }; + }; +... -- cgit v1.2.3