From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- Documentation/devicetree/bindings/arm/psci.yaml | 263 ++++++++++++++++++++++++ 1 file changed, 263 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/psci.yaml (limited to 'Documentation/devicetree/bindings/arm/psci.yaml') diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml new file mode 100644 index 000000000..3a2c908ff --- /dev/null +++ b/Documentation/devicetree/bindings/arm/psci.yaml @@ -0,0 +1,263 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/psci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Power State Coordination Interface (PSCI) + +maintainers: + - Lorenzo Pieralisi + +description: |+ + Firmware implementing the PSCI functions described in ARM document number + ARM DEN 0022A ("Power State Coordination Interface System Software on ARM + processors") can be used by Linux to initiate various CPU-centric power + operations. + + Issue A of the specification describes functions for CPU suspend, hotplug + and migration of secure software. + + Functions are invoked by trapping to the privilege level of the PSCI + firmware (specified as part of the binding below) and passing arguments + in a manner similar to that specified by AAPCS: + + r0 => 32-bit Function ID / return value + {r1 - r3} => Parameters + + Note that the immediate field of the trapping instruction must be set + to #0. + + [2] Power State Coordination Interface (PSCI) specification + http://infocenter.arm.com/help/topic/com.arm.doc.den0022c/DEN0022C_Power_State_Coordination_Interface.pdf + +properties: + $nodename: + const: psci + + compatible: + oneOf: + - description: + For implementations complying to PSCI versions prior to 0.2. + const: arm,psci + + - description: + For implementations complying to PSCI 0.2. + Function IDs are not required and should be ignored by an OS with + PSCI 0.2 support, but are permitted to be present for compatibility + with existing software when "arm,psci" is later in the compatible + list. + minItems: 1 + items: + - const: arm,psci-0.2 + - const: arm,psci + + - description: + For implementations complying to PSCI 1.0. + PSCI 1.0 is backward compatible with PSCI 0.2 with minor + specification updates, as defined in the PSCI specification[2]. + minItems: 1 + items: + - const: arm,psci-1.0 + - const: arm,psci-0.2 + - const: arm,psci + + method: + description: The method of calling the PSCI firmware. + $ref: /schemas/types.yaml#/definitions/string-array + enum: + - smc + # HVC #0, with the register assignments specified in this binding. + - hvc + + cpu_suspend: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Function ID for CPU_SUSPEND operation + + cpu_off: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Function ID for CPU_OFF operation + + cpu_on: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Function ID for CPU_ON operation + + migrate: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Function ID for MIGRATE operation + + arm,psci-suspend-param: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + power_state parameter to pass to the PSCI suspend call. + + Device tree nodes that require usage of PSCI CPU_SUSPEND function (ie + idle state nodes with entry-method property is set to "psci", as per + bindings in [1]) must specify this property. + + [1] Kernel documentation - ARM idle states bindings + Documentation/devicetree/bindings/cpu/idle-states.yaml + +patternProperties: + "^power-domain-": + $ref: "../power/power-domain.yaml#" + + type: object + description: | + ARM systems can have multiple cores, sometimes in an hierarchical + arrangement. This often, but not always, maps directly to the processor + power topology of the system. Individual nodes in a topology have their + own specific power states and can be better represented hierarchically. + + For these cases, the definitions of the idle states for the CPUs and the + CPU topology, must conform to the binding in [3]. The idle states + themselves must conform to the binding in [4] and must specify the + arm,psci-suspend-param property. + + It should also be noted that, in PSCI firmware v1.0 the OS-Initiated + (OSI) CPU suspend mode is introduced. Using a hierarchical representation + helps to implement support for OSI mode and OS implementations may choose + to mandate it. + + [3] Documentation/devicetree/bindings/power/power-domain.yaml + [4] Documentation/devicetree/bindings/power/domain-idle-state.yaml + +required: + - compatible + - method + +allOf: + - if: + properties: + compatible: + contains: + const: arm,psci + then: + required: + - cpu_off + - cpu_on + +additionalProperties: false + +examples: + - |+ + + // Case 1: PSCI v0.1 only. + + psci { + compatible = "arm,psci"; + method = "smc"; + cpu_suspend = <0x95c10000>; + cpu_off = <0x95c10001>; + cpu_on = <0x95c10002>; + migrate = <0x95c10003>; + }; + + - |+ + + // Case 2: PSCI v0.2 only + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + + - |+ + + // Case 3: PSCI v0.2 and PSCI v0.1. + + /* + * A DTB may provide IDs for use by kernels without PSCI 0.2 support, + * enabling firmware and hypervisors to support existing and new kernels. + * These IDs will be ignored by kernels with PSCI 0.2 support, which will + * use the standard PSCI 0.2 IDs exclusively. + */ + + psci { + compatible = "arm,psci-0.2", "arm,psci"; + method = "hvc"; + + cpu_on = <0x95c10002>; + cpu_off = <0x95c10001>; + }; + + - |+ + + // Case 4: CPUs and CPU idle states described using the hierarchical model. + + cpus { + #size-cells = <0>; + #address-cells = <1>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x100>; + enable-method = "psci"; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + }; + + idle-states { + + CPU_PWRDN: cpu-power-down { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0000001>; + entry-latency-us = <10>; + exit-latency-us = <10>; + min-residency-us = <100>; + }; + }; + + domain-idle-states { + + CLUSTER_RET: cluster-retention { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x1000011>; + entry-latency-us = <500>; + exit-latency-us = <500>; + min-residency-us = <2000>; + }; + + CLUSTER_PWRDN: cluster-power-down { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x1000031>; + entry-latency-us = <2000>; + exit-latency-us = <2000>; + min-residency-us = <6000>; + }; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + domain-idle-states = <&CPU_PWRDN>; + power-domains = <&CLUSTER_PD>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + domain-idle-states = <&CPU_PWRDN>; + power-domains = <&CLUSTER_PD>; + }; + + CLUSTER_PD: power-domain-cluster { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>; + }; + }; +... -- cgit v1.2.3