From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../devicetree/bindings/display/msm/gpu.yaml | 292 +++++++++++++++++++++ 1 file changed, 292 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/msm/gpu.yaml (limited to 'Documentation/devicetree/bindings/display/msm/gpu.yaml') diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml new file mode 100644 index 000000000..c5f49842d --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml @@ -0,0 +1,292 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: "http://devicetree.org/schemas/display/msm/gpu.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Adreno or Snapdragon GPUs + +maintainers: + - Rob Clark + +properties: + compatible: + oneOf: + - description: | + The driver is parsing the compat string for Adreno to + figure out the gpu-id and patch level. + items: + - pattern: '^qcom,adreno-[3-6][0-9][0-9]\.[0-9]$' + - const: qcom,adreno + - description: | + The driver is parsing the compat string for Imageon to + figure out the gpu-id and patch level. + items: + - pattern: '^amd,imageon-200\.[0-1]$' + - const: amd,imageon + + clocks: true + + clock-names: true + + reg: + minItems: 1 + maxItems: 3 + + reg-names: + minItems: 1 + items: + - const: kgsl_3d0_reg_memory + - const: cx_mem + - const: cx_dbgc + + interrupts: + maxItems: 1 + + interrupt-names: + maxItems: 1 + + interconnects: + minItems: 1 + maxItems: 2 + + interconnect-names: + minItems: 1 + items: + - const: gfx-mem + - const: ocmem + + iommus: + minItems: 1 + maxItems: 64 + + sram: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 4 + items: + maxItems: 1 + description: | + phandles to one or more reserved on-chip SRAM regions. + phandle to the On Chip Memory (OCMEM) that's present on some a3xx and + a4xx Snapdragon SoCs. See + Documentation/devicetree/bindings/sram/qcom,ocmem.yaml + + operating-points-v2: true + opp-table: + type: object + + power-domains: + maxItems: 1 + + zap-shader: + type: object + additionalProperties: false + description: | + For a5xx and a6xx devices this node contains a memory-region that + points to reserved memory to store the zap shader that can be used to + help bring the GPU out of secure mode. + properties: + memory-region: + $ref: /schemas/types.yaml#/definitions/phandle + + firmware-name: + description: | + Default name of the firmware to load to the remote processor. + + "#cooling-cells": + const: 2 + + nvmem-cell-names: + maxItems: 1 + + nvmem-cells: + description: efuse registers + maxItems: 1 + + qcom,gmu: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + For GMU attached devices a phandle to the GMU device that will + control the power for the GPU. + + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + pattern: '^qcom,adreno-[3-5][0-9][0-9]\.[0-9]$' + + then: + properties: + clocks: + minItems: 2 + maxItems: 7 + + clock-names: + items: + anyOf: + - const: core + description: GPU Core clock + - const: iface + description: GPU Interface clock + - const: mem + description: GPU Memory clock + - const: mem_iface + description: GPU Memory Interface clock + - const: alt_mem_iface + description: GPU Alternative Memory Interface clock + - const: gfx3d + description: GPU 3D engine clock + - const: rbbmtimer + description: GPU RBBM Timer for Adreno 5xx series + minItems: 2 + maxItems: 7 + + required: + - clocks + - clock-names + - if: + properties: + compatible: + contains: + pattern: '^qcom,adreno-6[0-9][0-9]\.[0-9]$' + + then: # Since Adreno 6xx series clocks should be defined in GMU + properties: + clocks: false + clock-names: false + +examples: + - | + + // Example a3xx/4xx: + + #include + #include + #include + #include + + gpu: gpu@fdb00000 { + compatible = "qcom,adreno-330.2", "qcom,adreno"; + + reg = <0xfdb00000 0x10000>; + reg-names = "kgsl_3d0_reg_memory"; + + clock-names = "core", "iface", "mem_iface"; + clocks = <&mmcc OXILI_GFX3D_CLK>, + <&mmcc OXILICX_AHB_CLK>, + <&mmcc OXILICX_AXI_CLK>; + + interrupts = ; + interrupt-names = "kgsl_3d0_irq"; + + sram = <&gpu_sram>; + power-domains = <&mmcc OXILICX_GDSC>; + operating-points-v2 = <&gpu_opp_table>; + iommus = <&gpu_iommu 0>; + #cooling-cells = <2>; + }; + + ocmem@fdd00000 { + compatible = "qcom,msm8974-ocmem"; + + reg = <0xfdd00000 0x2000>, + <0xfec00000 0x180000>; + reg-names = "ctrl", "mem"; + + clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, + <&mmcc OCMEMCX_OCMEMNOC_CLK>; + clock-names = "core", "iface"; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xfec00000 0x100000>; + + gpu_sram: gpu-sram@0 { + reg = <0x0 0x100000>; + }; + }; + - | + + // Example a6xx (with GMU): + + #include + #include + #include + #include + #include + #include + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + + zap_shader_region: gpu@8f200000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x90b00000 0x0 0xa00000>; + no-map; + }; + }; + + gpu@5000000 { + compatible = "qcom,adreno-630.2", "qcom,adreno"; + + reg = <0x5000000 0x40000>, <0x509e000 0x10>; + reg-names = "kgsl_3d0_reg_memory", "cx_mem"; + + #cooling-cells = <2>; + + interrupts = ; + + iommus = <&adreno_smmu 0>; + + operating-points-v2 = <&gpu_opp_table>; + + interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>; + interconnect-names = "gfx-mem"; + + qcom,gmu = <&gmu>; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-430000000 { + opp-hz = /bits/ 64 <430000000>; + opp-level = ; + opp-peak-kBps = <5412000>; + }; + + opp-355000000 { + opp-hz = /bits/ 64 <355000000>; + opp-level = ; + opp-peak-kBps = <3072000>; + }; + + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-level = ; + opp-peak-kBps = <3072000>; + }; + + opp-180000000 { + opp-hz = /bits/ 64 <180000000>; + opp-level = ; + opp-peak-kBps = <1804000>; + }; + }; + + zap-shader { + memory-region = <&zap_shader_region>; + firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn"; + }; + }; -- cgit v1.2.3