From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../devicetree/bindings/extcon/extcon-max3355.txt | 21 ++++ .../devicetree/bindings/extcon/extcon-palmas.txt | 22 ++++ .../devicetree/bindings/extcon/extcon-ptn5150.yaml | 62 ++++++++++ .../devicetree/bindings/extcon/extcon-rt8973a.txt | 23 ++++ .../devicetree/bindings/extcon/extcon-usb-gpio.txt | 21 ++++ .../bindings/extcon/extcon-usbc-cros-ec.yaml | 55 +++++++++ .../bindings/extcon/extcon-usbc-tusb320.yaml | 43 +++++++ .../devicetree/bindings/extcon/fcs,fsa880.yaml | 52 +++++++++ .../devicetree/bindings/extcon/maxim,max77843.yaml | 40 +++++++ .../bindings/extcon/qcom,pm8941-misc.yaml | 62 ++++++++++ .../bindings/extcon/siliconmitus,sm5502-muic.yaml | 53 +++++++++ .../devicetree/bindings/extcon/wlf,arizona.yaml | 126 +++++++++++++++++++++ 12 files changed, 580 insertions(+) create mode 100644 Documentation/devicetree/bindings/extcon/extcon-max3355.txt create mode 100644 Documentation/devicetree/bindings/extcon/extcon-palmas.txt create mode 100644 Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml create mode 100644 Documentation/devicetree/bindings/extcon/extcon-rt8973a.txt create mode 100644 Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt create mode 100644 Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml create mode 100644 Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml create mode 100644 Documentation/devicetree/bindings/extcon/fcs,fsa880.yaml create mode 100644 Documentation/devicetree/bindings/extcon/maxim,max77843.yaml create mode 100644 Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml create mode 100644 Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml create mode 100644 Documentation/devicetree/bindings/extcon/wlf,arizona.yaml (limited to 'Documentation/devicetree/bindings/extcon') diff --git a/Documentation/devicetree/bindings/extcon/extcon-max3355.txt b/Documentation/devicetree/bindings/extcon/extcon-max3355.txt new file mode 100644 index 000000000..f2288ea9e --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/extcon-max3355.txt @@ -0,0 +1,21 @@ +Maxim Integrated MAX3355 USB OTG chip +------------------------------------- + +MAX3355 integrates a charge pump and comparators to enable a system with an +integrated USB OTG dual-role transceiver to function as a USB OTG dual-role +device. + +Required properties: +- compatible: should be "maxim,max3355"; +- maxim,shdn-gpios: should contain a phandle and GPIO specifier for the GPIO pin + connected to the MAX3355's SHDN# pin; +- id-gpios: should contain a phandle and GPIO specifier for the GPIO pin + connected to the MAX3355's ID_OUT pin. + +Example: + + usb-otg { + compatible = "maxim,max3355"; + maxim,shdn-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + id-gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/extcon/extcon-palmas.txt b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt new file mode 100644 index 000000000..f61d5af44 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt @@ -0,0 +1,22 @@ +EXTCON FOR PALMAS/TWL CHIPS + +PALMAS USB COMPARATOR +Required Properties: + - compatible: should contain one of: + * "ti,palmas-usb-vid". + * "ti,twl6035-usb-vid". + * "ti,palmas-usb" (DEPRECATED - use "ti,palmas-usb-vid"). + * "ti,twl6035-usb" (DEPRECATED - use "ti,twl6035-usb-vid"). + +Optional Properties: + - ti,wakeup : To enable the wakeup comparator in probe + - ti,enable-id-detection: Perform ID detection. If id-gpio is specified + it performs id-detection using GPIO else using OTG core. + - ti,enable-vbus-detection: Perform VBUS detection. + - id-gpio: gpio for GPIO ID detection. See gpio binding. + - debounce-delay-ms: debounce delay for GPIO ID pin in milliseconds. + +palmas-usb { + compatible = "ti,twl6035-usb", "ti,palmas-usb"; + ti,wakeup; +}; diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml new file mode 100644 index 000000000..d5cfa32ea --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PTN5150 CC (Configuration Channel) Logic device + +maintainers: + - Krzysztof Kozlowski + +description: | + PTN5150 is a small thin low power CC logic chip supporting the USB Type-C + connector application with CC control logic detection and indication + functions. It is interfaced to the host controller using an I2C interface. + +properties: + compatible: + const: nxp,ptn5150 + + int-gpios: + maxItems: 1 + deprecated: true + description: + GPIO pin (input) connected to the PTN5150's INTB pin. + Use "interrupts" instead. + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + vbus-gpios: + maxItems: 1 + description: + GPIO pin (output) used to control VBUS. If skipped, no such control + takes place. + +required: + - compatible + - interrupts + - reg + +additionalProperties: false + +examples: + - | + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ptn5150@1d { + compatible = "nxp,ptn5150"; + reg = <0x1d>; + interrupt-parent = <&msmgpio>; + interrupts = <78 IRQ_TYPE_LEVEL_HIGH>; + vbus-gpios = <&msmgpio 148 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/extcon/extcon-rt8973a.txt b/Documentation/devicetree/bindings/extcon/extcon-rt8973a.txt new file mode 100644 index 000000000..cfcf455ad --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/extcon-rt8973a.txt @@ -0,0 +1,23 @@ + +* Richtek RT8973A - Micro USB Switch device + +The Richtek RT8973A is Micro USB Switch with OVP and I2C interface. The RT8973A +is a USB port accessory detector and switch that is optimized to protect low +voltage system from abnormal high input voltage (up to 28V) and supports high +speed USB operation. Also, RT8973A support 'auto-configuration' mode. +If auto-configuration mode is enabled, RT8973A would control internal h/w patch +for USB D-/D+ switching. + +Required properties: +- compatible: Should be "richtek,rt8973a-muic" +- reg: Specifies the I2C slave address of the MUIC block. It should be 0x14 +- interrupts: Interrupt specifiers for detection interrupt sources. + +Example: + + rt8973a@14 { + compatible = "richtek,rt8973a-muic"; + interrupt-parent = <&gpx1>; + interrupts = <5 0>; + reg = <0x14>; + }; diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt new file mode 100644 index 000000000..dfc14f71e --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt @@ -0,0 +1,21 @@ +USB GPIO Extcon device + +This is a virtual device used to generate USB cable states from the USB ID pin +connected to a GPIO pin. + +Required properties: +- compatible: Should be "linux,extcon-usb-gpio" + +Either one of id-gpio or vbus-gpio must be present. Both can be present as well. +- id-gpio: gpio for USB ID pin. See gpio binding. +- vbus-gpio: gpio for USB VBUS pin. + +Example: Examples of extcon-usb-gpio node in dra7-evm.dts as listed below: + extcon_usb1 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>; + } + + &omap_dwc3_1 { + extcon = <&extcon_usb1>; + }; diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml new file mode 100644 index 000000000..2e5b39881 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/extcon-usbc-cros-ec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ChromeOS EC USB Type-C cable and accessories detection + +maintainers: + - Benson Leung + +description: | + On ChromeOS systems with USB Type C ports, the ChromeOS Embedded Controller is + able to detect the state of external accessories such as display adapters + or USB devices when said accessories are attached or detached. + The node for this device must be under a cros-ec node like google,cros-ec-spi + or google,cros-ec-i2c. + +properties: + compatible: + const: google,extcon-usbc-cros-ec + + google,usb-port-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: the port id + minimum: 0 + maximum: 255 + +required: + - compatible + - google,usb-port-id + +additionalProperties: false + +examples: + - | + spi0 { + #address-cells = <1>; + #size-cells = <0>; + cros-ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + interrupts = <44 0>; + + usbc_extcon0: extcon0 { + compatible = "google,extcon-usbc-cros-ec"; + google,usb-port-id = <0>; + }; + + usbc_extcon1: extcon1 { + compatible = "google,extcon-usbc-cros-ec"; + google,usb-port-id = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml b/Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml new file mode 100644 index 000000000..71a9f2e5d --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/extcon-usbc-tusb320.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TUSB320 USB Type-C CC Logic controller + +maintainers: + - Michael Auchter + +properties: + compatible: + enum: + - ti,tusb320 + - ti,tusb320l + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + tusb320@61 { + compatible = "ti,tusb320"; + reg = <0x61>; + interrupt-parent = <&gpio>; + interrupts = <27 1>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/extcon/fcs,fsa880.yaml b/Documentation/devicetree/bindings/extcon/fcs,fsa880.yaml new file mode 100644 index 000000000..ef6a246a1 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/fcs,fsa880.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/fcs,fsa880.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Fairchild Semiconductor FSA880, FSA9480 and compatibles + +maintainers: + - Linus Walleij + +description: + The FSA880 and FSA9480 are USB port accessory detectors and switches. + The switch is fully controlled using I2C and enables USB data, stereo + and mono audio, video, microphone, and UART data to use a common + connector port. Compatible switches exist from other manufacturers. + +properties: + compatible: + enum: + - fcs,fsa880 + - fcs,fsa9480 + - ti,tsu6111 + + reg: + maxItems: 1 + description: The I2C address for an FSA880 compatible device is + usually 0x25. + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + usb-switch@25 { + compatible = "fcs,fsa880"; + reg = <0x25>; + interrupt-parent = <&gpio>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml b/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml new file mode 100644 index 000000000..128960545 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/maxim,max77843.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77843 MicroUSB and Companion Power Management IC Extcon + +maintainers: + - Chanwoo Choi + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for Maxim MAX77843 MicroUSB + Integrated Circuit (MUIC). + + See also Documentation/devicetree/bindings/mfd/maxim,max77843.yaml for + additional information and example. + +properties: + compatible: + const: maxim,max77843-muic + + connector: + $ref: /schemas/connector/usb-connector.yaml# + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: + Any connector to the data bus of this controller should be modelled using + the OF graph bindings specified + properties: + port: + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - connector + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml new file mode 100644 index 000000000..6a9c96f03 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/qcom,pm8941-misc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. PM8941 USB ID Extcon device + +maintainers: + - Guru Das Srinagesh + +description: | + Some Qualcomm PMICs have a "misc" module that can be used to detect when + the USB ID pin has been pulled low or high. + +properties: + compatible: + items: + - const: qcom,pm8941-misc + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + items: + - const: usb_id + - const: usb_vbus + +required: + - compatible + - reg + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + #include + + pmic { + #address-cells = <1>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + + usb_id: misc@900 { + compatible = "qcom,pm8941-misc"; + reg = <0x900>; + interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "usb_id"; + }; + }; + + usb-controller { + extcon = <&usb_id>; + }; diff --git a/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml b/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml new file mode 100644 index 000000000..7a224b2f0 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/siliconmitus,sm5502-muic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SM5502/SM5504 MUIC (Micro-USB Interface Controller) device + +maintainers: + - Chanwoo Choi + +description: + The Silicon Mitus SM5502 is a MUIC (Micro-USB Interface Controller) device + which can detect the state of external accessory when external accessory is + attached or detached and button is pressed or released. It is interfaced to + the host controller using an I2C interface. + +properties: + compatible: + enum: + - siliconmitus,sm5502-muic + - siliconmitus,sm5504-muic + - siliconmitus,sm5703-muic + + reg: + maxItems: 1 + description: I2C slave address of the device. Usually 0x25 for SM5502 + and SM5703, 0x14 for SM5504. + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + extcon@25 { + compatible = "siliconmitus,sm5502-muic"; + reg = <0x25>; + interrupt-parent = <&msmgpio>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml new file mode 100644 index 000000000..efdf59abb --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/wlf,arizona.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs + +maintainers: + - patches@opensource.cirrus.com + +description: | + These devices are audio SoCs with extensive digital capabilities and a + range of analogue I/O. + + This document lists Extcon specific bindings, see the primary binding + document ../mfd/arizona.yaml + +properties: + wlf,hpdet-channel: + description: + Headphone detection channel. ARIZONA_ACCDET_MODE_HPL/1 sets the + headphone detect mode to HPDETL, ARIZONA_ACCDET_MODE_HPR/2 sets it + to HPDETR. If this node is not included or if the value is unknown, + then headphone detection mode is set to HPDETL. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 1 + maximum: 2 + + wlf,use-jd2: + description: + Use the additional JD input along with JD1 for dual pin jack detection. + type: boolean + + wlf,use-jd2-nopull: + description: + Internal pull on JD2 is disabled when used for jack detection. + type: boolean + + wlf,jd-invert: + description: + Invert the polarity of the jack detection switch. + type: boolean + + wlf,micd-software-compare: + description: + Use a software comparison to determine mic presence. + type: boolean + + wlf,micd-detect-debounce: + description: + Additional software microphone detection debounce specified in + milliseconds. + $ref: "/schemas/types.yaml#/definitions/uint32" + + wlf,micd-pol-gpio: + description: + GPIO specifier for the GPIO controlling the headset polarity if one + exists. + maxItems: 1 + + wlf,micd-bias-start-time: + description: + Time allowed for MICBIAS to startup prior to performing microphone + detection, specified as per the ARIZONA_MICD_TIME_XXX defines. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 12 + + wlf,micd-rate: + description: + Delay between successive microphone detection measurements, specified + as per the ARIZONA_MICD_TIME_XXX defines. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 12 + + wlf,micd-dbtime: + description: + Microphone detection hardware debounces specified as the number of + measurements to take. + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: [2, 4] + + wlf,micd-timeout-ms: + description: + Timeout for microphone detection, specified in milliseconds. + + wlf,micd-force-micbias: + description: + Force MICBIAS continuously on during microphone detection. + type: boolean + + wlf,micd-configs: + description: + Headset polarity configurations (generally used for detection of + CTIA / OMTP headsets), the field can be of variable length but + should always be a multiple of 3 cells long, each three cell group + represents one polarity configuration. + $ref: "/schemas/types.yaml#/definitions/uint32-matrix" + items: + items: + - description: + The first cell defines the accessory detection pin, zero + will use MICDET1 and 0x2000 will use MICDET2. + enum: [ 0, 0x2000 ] + - description: + The second cell represents the MICBIAS to be used. Zero + will use MICVDD, 1-3 will use MICBIASx. + minimum: 0 + maximum: 3 + - description: + The third cell represents the value of the micd-pol-gpio + pin. + minimum: 0 + maximum: 1 + + wlf,gpsw: + description: + Settings for the general purpose switch, set as one of the + ARIZONA_GPSW_XXX defines. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3 + +additionalProperties: true -- cgit v1.2.3