From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../ddr/jedec,lpddr-channel.yaml | 146 +++++++++++++ .../memory-controllers/ddr/jedec,lpddr-props.yaml | 74 +++++++ .../ddr/jedec,lpddr2-timings.yaml | 135 ++++++++++++ .../memory-controllers/ddr/jedec,lpddr2.yaml | 204 +++++++++++++++++ .../ddr/jedec,lpddr3-timings.yaml | 157 +++++++++++++ .../memory-controllers/ddr/jedec,lpddr3.yaml | 243 +++++++++++++++++++++ .../memory-controllers/ddr/jedec,lpddr4.yaml | 35 +++ .../memory-controllers/ddr/jedec,lpddr5.yaml | 46 ++++ 8 files changed, 1040 insertions(+) create mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-channel.yaml create mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-props.yaml create mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml create mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml create mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml create mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml create mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr4.yaml create mode 100644 Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr5.yaml (limited to 'Documentation/devicetree/bindings/memory-controllers/ddr') diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-channel.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-channel.yaml new file mode 100644 index 000000000..34b5bd153 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-channel.yaml @@ -0,0 +1,146 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr-channel.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LPDDR channel with chip/rank topology description + +description: + An LPDDR channel is a completely independent set of LPDDR pins (DQ, CA, CS, + CK, etc.) that connect one or more LPDDR chips to a host system. The main + purpose of this node is to overall LPDDR topology of the system, including the + amount of individual LPDDR chips and the ranks per chip. + +maintainers: + - Julius Werner + +properties: + compatible: + enum: + - jedec,lpddr2-channel + - jedec,lpddr3-channel + - jedec,lpddr4-channel + - jedec,lpddr5-channel + + io-width: + description: + The number of DQ pins in the channel. If this number is different + from (a multiple of) the io-width of the LPDDR chip, that means that + multiple instances of that type of chip are wired in parallel on this + channel (with the channel's DQ pins split up between the different + chips, and the CA, CS, etc. pins of the different chips all shorted + together). This means that the total physical memory controlled by a + channel is equal to the sum of the densities of each rank on the + connected LPDDR chip, times the io-width of the channel divided by + the io-width of the LPDDR chip. + enum: + - 8 + - 16 + - 32 + - 64 + - 128 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^rank@[0-9]+$": + type: object + description: + Each physical LPDDR chip may have one or more ranks. Ranks are + internal but fully independent sub-units of the chip. Each LPDDR bus + transaction on the channel targets exactly one rank, based on the + state of the CS pins. Different ranks may have different densities and + timing requirements. + required: + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: jedec,lpddr2-channel + then: + patternProperties: + "^rank@[0-9]+$": + $ref: /schemas/memory-controllers/ddr/jedec,lpddr2.yaml# + - if: + properties: + compatible: + contains: + const: jedec,lpddr3-channel + then: + patternProperties: + "^rank@[0-9]+$": + $ref: /schemas/memory-controllers/ddr/jedec,lpddr3.yaml# + - if: + properties: + compatible: + contains: + const: jedec,lpddr4-channel + then: + patternProperties: + "^rank@[0-9]+$": + $ref: /schemas/memory-controllers/ddr/jedec,lpddr4.yaml# + - if: + properties: + compatible: + contains: + const: jedec,lpddr5-channel + then: + patternProperties: + "^rank@[0-9]+$": + $ref: /schemas/memory-controllers/ddr/jedec,lpddr5.yaml# + +required: + - compatible + - io-width + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + lpddr-channel0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "jedec,lpddr3-channel"; + io-width = <32>; + + rank@0 { + compatible = "lpddr3-ff,0100", "jedec,lpddr3"; + reg = <0>; + density = <8192>; + io-width = <16>; + revision-id = <1 0>; + }; + }; + + lpddr-channel1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "jedec,lpddr4-channel"; + io-width = <32>; + + rank@0 { + compatible = "lpddr4-05,0301", "jedec,lpddr4"; + reg = <0>; + density = <4096>; + io-width = <32>; + revision-id = <3 1>; + }; + + rank@1 { + compatible = "lpddr4-05,0301", "jedec,lpddr4"; + reg = <1>; + density = <2048>; + io-width = <32>; + revision-id = <3 1>; + }; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-props.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-props.yaml new file mode 100644 index 000000000..30267ce70 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-props.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr-props.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common properties for LPDDR types + +description: + Different LPDDR types generally use the same properties and only differ in the + range of legal values for each. This file defines the common parts that can be + reused for each type. Nodes using this schema should generally be nested under + an LPDDR channel node. + +maintainers: + - Krzysztof Kozlowski + +properties: + compatible: + description: + Compatible strings can be either explicit vendor names and part numbers + (e.g. elpida,ECB240ABACN), or generated strings of the form + lpddrX-YY,ZZZZ where X is the LPDDR version, YY is the manufacturer ID + (from MR5) and ZZZZ is the revision ID (from MR6 and MR7). Both IDs are + formatted in lower case hexadecimal representation with leading zeroes. + The latter form can be useful when LPDDR nodes are created at runtime by + boot firmware that doesn't have access to static part number information. + + reg: + description: + The rank number of this LPDDR rank when used as a subnode to an LPDDR + channel. + minimum: 0 + maximum: 3 + + revision-id: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Revision IDs read from Mode Register 6 and 7. One byte per uint32 cell (i.e. ). + maxItems: 2 + items: + minimum: 0 + maximum: 255 + + density: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Density in megabits of SDRAM chip. Decoded from Mode Register 8. + enum: + - 64 + - 128 + - 256 + - 512 + - 1024 + - 2048 + - 3072 + - 4096 + - 6144 + - 8192 + - 12288 + - 16384 + - 24576 + - 32768 + + io-width: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + IO bus width in bits of SDRAM chip. Decoded from Mode Register 8. + enum: + - 8 + - 16 + - 32 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml new file mode 100644 index 000000000..1daa66592 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr2-timings.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LPDDR2 SDRAM AC timing parameters for a given speed-bin + +maintainers: + - Krzysztof Kozlowski + +properties: + compatible: + const: jedec,lpddr2-timings + + max-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Maximum DDR clock frequency for the speed-bin, in Hz. + + min-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Minimum DDR clock frequency for the speed-bin, in Hz. + + tCKESR: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + CKE minimum pulse width during SELF REFRESH (low pulse width during + SELF REFRESH) in pico seconds. + + tDQSCK-max: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + DQS output data access time from CK_t/CK_c in pico seconds. + + tDQSCK-max-derated: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + DQS output data access time from CK_t/CK_c, temperature de-rated, in pico + seconds. + + tFAW: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Four-bank activate window in pico seconds. + + tRAS-max-ns: + description: | + Row active time in nano seconds. + + tRAS-min: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Row active time in pico seconds. + + tRCD: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + RAS-to-CAS delay in pico seconds. + + tRPab: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Row precharge time (all banks) in pico seconds. + + tRRD: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Active bank A to active bank B in pico seconds. + + tRTP: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Internal READ to PRECHARGE command delay in pico seconds. + + tWR: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + WRITE recovery time in pico seconds. + + tWTR: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Internal WRITE-to-READ command delay in pico seconds. + + tXP: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Exit power-down to next valid command delay in pico seconds. + + tZQCL: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Long calibration time in pico seconds. + + tZQCS: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Short calibration time in pico seconds. + + tZQinit: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Initialization calibration time in pico seconds. + +required: + - compatible + - min-freq + - max-freq + +additionalProperties: false + +examples: + - | + timings { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <400000000>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tRAS-max-ns = <70000>; + tRAS-min = <42000>; + tRPab = <21000>; + tRCD = <18000>; + tRRD = <10000>; + tRTP = <7500>; + tWR = <15000>; + tWTR = <7500>; + tXP = <7500>; + tZQCL = <360000>; + tZQCS = <90000>; + tZQinit = <1000000>; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml new file mode 100644 index 000000000..a237bc259 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml @@ -0,0 +1,204 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LPDDR2 SDRAM compliant to JEDEC JESD209-2 + +maintainers: + - Krzysztof Kozlowski + +allOf: + - $ref: jedec,lpddr-props.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - elpida,ECB240ABACN + - elpida,B8132B2PB-6D-F + - enum: + - jedec,lpddr2-nvm + - jedec,lpddr2-s2 + - jedec,lpddr2-s4 + - items: + - pattern: "^lpddr2-[0-9a-f]{2},[0-9a-f]{4}$" + - enum: + - jedec,lpddr2-nvm + - jedec,lpddr2-s2 + - jedec,lpddr2-s4 + + revision-id1: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 255 + description: | + Revision 1 value of SDRAM chip. Obtained from device datasheet. + Property is deprecated, use revision-id instead. + deprecated: true + + revision-id2: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 255 + description: | + Revision 2 value of SDRAM chip. Obtained from device datasheet. + Property is deprecated, use revision-id instead. + deprecated: true + + tRRD-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 16 + description: | + Active bank a to active bank b in terms of number of clock cycles. + Obtained from device datasheet. + + tWTR-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 16 + description: | + Internal WRITE-to-READ command delay in terms of number of clock cycles. + Obtained from device datasheet. + + tXP-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 16 + description: | + Exit power-down to next valid command delay in terms of number of clock + cycles. Obtained from device datasheet. + + tRTP-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 16 + description: | + Internal READ to PRECHARGE command delay in terms of number of clock + cycles. Obtained from device datasheet. + + tCKE-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 16 + description: | + CKE minimum pulse width (HIGH and LOW pulse width) in terms of number + of clock cycles. Obtained from device datasheet. + + tRPab-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 16 + description: | + Row precharge time (all banks) in terms of number of clock cycles. + Obtained from device datasheet. + + tRCD-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 16 + description: | + RAS-to-CAS delay in terms of number of clock cycles. Obtained from + device datasheet. + + tWR-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 16 + description: | + WRITE recovery time in terms of number of clock cycles. Obtained from + device datasheet. + + tRASmin-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 16 + description: | + Row active time in terms of number of clock cycles. Obtained from device + datasheet. + + tCKESR-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 16 + description: | + CKE minimum pulse width during SELF REFRESH (low pulse width during + SELF REFRESH) in terms of number of clock cycles. Obtained from device + datasheet. + + tFAW-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 16 + description: | + Four-bank activate window in terms of number of clock cycles. Obtained + from device datasheet. + +patternProperties: + "^lpddr2-timings": + $ref: jedec,lpddr2-timings.yaml + description: | + The lpddr2 node may have one or more child nodes of type "lpddr2-timings". + "lpddr2-timings" provides AC timing parameters of the device for + a given speed-bin. The user may provide the timings for as many + speed-bins as is required. + +required: + - compatible + - density + - io-width + +unevaluatedProperties: false + +examples: + - | + elpida_ECB240ABACN: lpddr2 { + compatible = "elpida,ECB240ABACN", "jedec,lpddr2-s4"; + density = <2048>; + io-width = <32>; + revision-id = <1 0>; + + tRPab-min-tck = <3>; + tRCD-min-tck = <3>; + tWR-min-tck = <3>; + tRASmin-min-tck = <3>; + tRRD-min-tck = <2>; + tWTR-min-tck = <2>; + tXP-min-tck = <2>; + tRTP-min-tck = <2>; + tCKE-min-tck = <3>; + tCKESR-min-tck = <3>; + tFAW-min-tck = <8>; + + timings_elpida_ECB240ABACN_400mhz: lpddr2-timings0 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <400000000>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <7500>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + }; + + timings_elpida_ECB240ABACN_200mhz: lpddr2-timings1 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <200000000>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <10000>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + }; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml new file mode 100644 index 000000000..5c6512c1e --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml @@ -0,0 +1,157 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr3-timings.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LPDDR3 SDRAM AC timing parameters for a given speed-bin + +maintainers: + - Krzysztof Kozlowski + +properties: + compatible: + const: jedec,lpddr3-timings + + reg: + maxItems: 1 + description: | + Maximum DDR clock frequency for the speed-bin, in Hz. + Property is deprecated, use max-freq. + deprecated: true + + max-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Maximum DDR clock frequency for the speed-bin, in Hz. + + min-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Minimum DDR clock frequency for the speed-bin, in Hz. + + tCKE: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + CKE minimum pulse width (HIGH and LOW pulse width) in pico seconds. + + tCKESR: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + CKE minimum pulse width during SELF REFRESH (low pulse width during + SELF REFRESH) in pico seconds. + + tFAW: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Four-bank activate window in pico seconds. + + tMRD: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Mode register set command delay in pico seconds. + + tR2R-C2C: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Additional READ-to-READ delay in chip-to-chip cases in pico seconds. + + tRAS: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Row active time in pico seconds. + + tRC: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + ACTIVATE-to-ACTIVATE command period in pico seconds. + + tRCD: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + RAS-to-CAS delay in pico seconds. + + tRFC: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Refresh Cycle time in pico seconds. + + tRPab: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Row precharge time (all banks) in pico seconds. + + tRPpb: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Row precharge time (single banks) in pico seconds. + + tRRD: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Active bank A to active bank B in pico seconds. + + tRTP: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Internal READ to PRECHARGE command delay in pico seconds. + + tW2W-C2C: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Additional WRITE-to-WRITE delay in chip-to-chip cases in pico seconds. + + tWR: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + WRITE recovery time in pico seconds. + + tWTR: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Internal WRITE-to-READ command delay in pico seconds. + + tXP: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Exit power-down to next valid command delay in pico seconds. + + tXSR: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + SELF REFRESH exit to next valid command delay in pico seconds. + +required: + - compatible + - min-freq + - max-freq + +additionalProperties: false + +examples: + - | + lpddr3 { + timings { + compatible = "jedec,lpddr3-timings"; + max-freq = <800000000>; + min-freq = <100000000>; + tCKE = <3750>; + tCKESR = <3750>; + tFAW = <25000>; + tMRD = <7000>; + tR2R-C2C = <0>; + tRAS = <23000>; + tRC = <33750>; + tRCD = <10000>; + tRFC = <65000>; + tRPab = <12000>; + tRPpb = <12000>; + tRRD = <6000>; + tRTP = <3750>; + tW2W-C2C = <0>; + tWR = <7500>; + tWTR = <3750>; + tXP = <3750>; + tXSR = <70000>; + }; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml new file mode 100644 index 000000000..e328a1195 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml @@ -0,0 +1,243 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LPDDR3 SDRAM compliant to JEDEC JESD209-3 + +maintainers: + - Krzysztof Kozlowski + +allOf: + - $ref: jedec,lpddr-props.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - samsung,K3QF2F20DB + - const: jedec,lpddr3 + - items: + - pattern: "^lpddr3-[0-9a-f]{2},[0-9a-f]{4}$" + - const: jedec,lpddr3 + + '#address-cells': + const: 1 + deprecated: true + + manufacturer-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Manufacturer ID value read from Mode Register 5. The property is + deprecated, manufacturer should be derived from the compatible. + deprecated: true + + '#size-cells': + const: 0 + deprecated: true + + tCKE-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 15 + description: | + CKE minimum pulse width (HIGH and LOW pulse width) in terms of number + of clock cycles. + + tCKESR-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 15 + description: | + CKE minimum pulse width during SELF REFRESH (low pulse width during + SELF REFRESH) in terms of number of clock cycles. + + tDQSCK-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 15 + description: | + DQS output data access time from CK_t/CK_c in terms of number of clock + cycles. + + tFAW-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 63 + description: | + Four-bank activate window in terms of number of clock cycles. + + tMRD-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 15 + description: | + Mode register set command delay in terms of number of clock cycles. + + tR2R-C2C-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: | + Additional READ-to-READ delay in chip-to-chip cases in terms of number + of clock cycles. + + tRAS-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 63 + description: | + Row active time in terms of number of clock cycles. + + tRC-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 63 + description: | + ACTIVATE-to-ACTIVATE command period in terms of number of clock cycles. + + tRCD-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 15 + description: | + RAS-to-CAS delay in terms of number of clock cycles. + + tRFC-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 255 + description: | + Refresh Cycle time in terms of number of clock cycles. + + tRL-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 15 + description: | + READ data latency in terms of number of clock cycles. + + tRPab-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 15 + description: | + Row precharge time (all banks) in terms of number of clock cycles. + + tRPpb-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 15 + description: | + Row precharge time (single banks) in terms of number of clock cycles. + + tRRD-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 15 + description: | + Active bank A to active bank B in terms of number of clock cycles. + + tRTP-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 15 + description: | + Internal READ to PRECHARGE command delay in terms of number of clock + cycles. + + tW2W-C2C-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: | + Additional WRITE-to-WRITE delay in chip-to-chip cases in terms of number + of clock cycles. + + tWL-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 15 + description: | + WRITE data latency in terms of number of clock cycles. + + tWR-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 15 + description: | + WRITE recovery time in terms of number of clock cycles. + + tWTR-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 15 + description: | + Internal WRITE-to-READ command delay in terms of number of clock cycles. + + tXP-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 255 + description: | + Exit power-down to next valid command delay in terms of number of clock + cycles. + + tXSR-min-tck: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 1023 + description: | + SELF REFRESH exit to next valid command delay in terms of number of clock + cycles. + +patternProperties: + "^timings((-[0-9])+|(@[0-9a-f]+))?$": + $ref: jedec,lpddr3-timings.yaml + description: | + The lpddr3 node may have one or more child nodes with timings. + Each timing node provides AC timing parameters of the device for a given + speed-bin. The user may provide the timings for as many speed-bins as is + required. + +required: + - compatible + - density + - io-width + +unevaluatedProperties: false + +examples: + - | + lpddr3 { + compatible = "samsung,K3QF2F20DB", "jedec,lpddr3"; + density = <16384>; + io-width = <32>; + + tCKE-min-tck = <2>; + tCKESR-min-tck = <2>; + tDQSCK-min-tck = <5>; + tFAW-min-tck = <5>; + tMRD-min-tck = <5>; + tR2R-C2C-min-tck = <0>; + tRAS-min-tck = <5>; + tRC-min-tck = <6>; + tRCD-min-tck = <3>; + tRFC-min-tck = <17>; + tRL-min-tck = <14>; + tRPab-min-tck = <2>; + tRPpb-min-tck = <2>; + tRRD-min-tck = <2>; + tRTP-min-tck = <2>; + tW2W-C2C-min-tck = <0>; + tWL-min-tck = <8>; + tWR-min-tck = <7>; + tWTR-min-tck = <2>; + tXP-min-tck = <2>; + tXSR-min-tck = <12>; + + timings { + compatible = "jedec,lpddr3-timings"; + max-freq = <800000000>; + min-freq = <100000000>; + tCKE = <3750>; + tCKESR = <3750>; + tFAW = <25000>; + tMRD = <7000>; + tR2R-C2C = <0>; + tRAS = <23000>; + tRC = <33750>; + tRCD = <10000>; + tRFC = <65000>; + tRPab = <12000>; + tRPpb = <12000>; + tRRD = <6000>; + tRTP = <3750>; + tW2W-C2C = <0>; + tWR = <7500>; + tWTR = <3750>; + tXP = <3750>; + tXSR = <70000>; + }; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr4.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr4.yaml new file mode 100644 index 000000000..a078892fe --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr4.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr4.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LPDDR4 SDRAM compliant to JEDEC JESD209-4 + +maintainers: + - Krzysztof Kozlowski + +allOf: + - $ref: jedec,lpddr-props.yaml# + +properties: + compatible: + items: + - pattern: "^lpddr4-[0-9a-f]{2},[0-9a-f]{4}$" + - const: jedec,lpddr4 + +required: + - compatible + - density + - io-width + +unevaluatedProperties: false + +examples: + - | + lpddr { + compatible = "lpddr4-ff,0100", "jedec,lpddr4"; + density = <8192>; + io-width = <16>; + revision-id = <1 0>; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr5.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr5.yaml new file mode 100644 index 000000000..e441dac5f --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr5.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr5.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LPDDR5 SDRAM compliant to JEDEC JESD209-5 + +maintainers: + - Krzysztof Kozlowski + +allOf: + - $ref: jedec,lpddr-props.yaml# + +properties: + compatible: + items: + - pattern: "^lpddr5-[0-9a-f]{2},[0-9a-f]{4}$" + - const: jedec,lpddr5 + + serial-id: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Serial IDs read from Mode Registers 47 through 54. One byte per uint32 + cell (i.e. ). + maxItems: 8 + items: + minimum: 0 + maximum: 255 + +required: + - compatible + - density + - io-width + +unevaluatedProperties: false + +examples: + - | + lpddr { + compatible = "lpddr5-01,0200", "jedec,lpddr5"; + density = <8192>; + io-width = <8>; + revision-id = <2 0>; + serial-id = <3 1 0 0 0 0 0 0>; + }; -- cgit v1.2.3