From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../spmi/hisilicon,hisi-spmi-controller.yaml | 73 ++++++++++++ .../bindings/spmi/mtk,spmi-mtk-pmif.yaml | 76 ++++++++++++ .../bindings/spmi/qcom,spmi-pmic-arb.yaml | 127 +++++++++++++++++++++ Documentation/devicetree/bindings/spmi/spmi.yaml | 75 ++++++++++++ 4 files changed, 351 insertions(+) create mode 100644 Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml create mode 100644 Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml create mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml create mode 100644 Documentation/devicetree/bindings/spmi/spmi.yaml (limited to 'Documentation/devicetree/bindings/spmi') diff --git a/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml b/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml new file mode 100644 index 000000000..f88290376 --- /dev/null +++ b/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spmi/hisilicon,hisi-spmi-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HiSilicon SPMI controller + +maintainers: + - Mauro Carvalho Chehab + +description: | + The HiSilicon SPMI BUS controller is found on some Kirin-based designs. + It is a MIPI System Power Management (SPMI) controller. + + The PMIC part is provided by + ./Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml. + +allOf: + - $ref: spmi.yaml# + +properties: + + $nodename: + pattern: "spmi@[0-9a-f]" + + compatible: + const: hisilicon,kirin970-spmi-controller + + reg: + maxItems: 1 + + hisilicon,spmi-channel: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + number of the Kirin 970 SPMI channel where the SPMI devices are connected. + +required: + - compatible + - reg + - hisilicon,spmi-channel + +patternProperties: + "@[0-9a-f]$": + type: object + + description: | + PMIC properties, which are specific to the used SPMI PMIC device(s). + When used in combination with HiSilicon 6421v600, the properties + are documented at + drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml. + +unevaluatedProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + spmi: spmi@fff24000 { + compatible = "hisilicon,kirin970-spmi-controller"; + #address-cells = <2>; + #size-cells = <0>; + reg = <0x0 0xfff24000 0x0 0x1000>; + hisilicon,spmi-channel = <2>; + + pmic@0 { + reg = <0 0>; + /* pmic properties */ + }; + }; + }; diff --git a/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml b/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml new file mode 100644 index 000000000..abcbbe137 --- /dev/null +++ b/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spmi/mtk,spmi-mtk-pmif.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek SPMI Controller + +maintainers: + - Hsin-Hsiung Wang + +description: |+ + On MediaTek SoCs the PMIC is connected via SPMI and the controller allows + for multiple SoCs to control a single SPMI master. + +allOf: + - $ref: "spmi.yaml" + +properties: + compatible: + enum: + - mediatek,mt6873-spmi + - mediatek,mt8195-spmi + + reg: + maxItems: 2 + + reg-names: + items: + - const: pmif + - const: spmimst + + clocks: + minItems: 3 + maxItems: 3 + + clock-names: + items: + - const: pmif_sys_ck + - const: pmif_tmr_ck + - const: spmimst_clk_mux + + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include + + spmi: spmi@10027000 { + compatible = "mediatek,mt6873-spmi"; + reg = <0x10027000 0xe00>, + <0x10029000 0x100>; + reg-names = "pmif", "spmimst"; + clocks = <&infracfg CLK_INFRA_PMIC_AP>, + <&infracfg CLK_INFRA_PMIC_TMR>, + <&topckgen CLK_TOP_SPMI_MST_SEL>; + clock-names = "pmif_sys_ck", + "pmif_tmr_ck", + "spmimst_clk_mux"; + assigned-clocks = <&topckgen CLK_TOP_PWRAP_ULPOSC_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_OSC_D10>; + }; +... diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml new file mode 100644 index 000000000..f983b4af6 --- /dev/null +++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spmi/qcom,spmi-pmic-arb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SPMI Controller (PMIC Arbiter) + +maintainers: + - Stephen Boyd + +description: | + The SPMI PMIC Arbiter is found on Snapdragon chipsets. It is an SPMI + controller with wrapping arbitration logic to allow for multiple on-chip + devices to control a single SPMI master. + + The PMIC Arbiter can also act as an interrupt controller, providing interrupts + to slave devices. + +allOf: + - $ref: spmi.yaml + +properties: + compatible: + const: qcom,spmi-pmic-arb + + reg: + oneOf: + - items: # V1 + - description: core registers + - description: interrupt controller registers + - description: configuration registers + - items: # V2 + - description: core registers + - description: tx-channel per virtual slave regosters + - description: rx-channel (called observer) per virtual slave registers + - description: interrupt controller registers + - description: configuration registers + + reg-names: + oneOf: + - items: + - const: core + - const: intr + - const: cnfg + - items: + - const: core + - const: chnls + - const: obsrvr + - const: intr + - const: cnfg + + interrupts: + maxItems: 1 + + interrupt-names: + const: periph_irq + + interrupt-controller: true + + '#address-cells': true + + '#interrupt-cells': + const: 4 + description: | + cell 1: slave ID for the requested interrupt (0-15) + cell 2: peripheral ID for requested interrupt (0-255) + cell 3: the requested peripheral interrupt (0-7) + cell 4: interrupt flags indicating level-sense information, + as defined in dt-bindings/interrupt-controller/irq.h + + '#size-cells': true + + qcom,ee: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 5 + description: > + indicates the active Execution Environment identifier + + qcom,channel: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 5 + description: > + which of the PMIC Arb provided channels to use for accesses + + qcom,bus-id: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 1 + description: > + SPMI bus instance. only applicable to PMIC arbiter version 7 and beyond. + Supported values, 0 = primary bus, 1 = secondary bus + +required: + - compatible + - reg-names + - qcom,ee + - qcom,channel + +unevaluatedProperties: false + +examples: + - | + spmi@fc4cf000 { + compatible = "qcom,spmi-pmic-arb"; + reg-names = "core", "intr", "cnfg"; + reg = <0xfc4cf000 0x1000>, + <0xfc4cb000 0x1000>, + <0xfc4ca000 0x1000>; + + interrupt-names = "periph_irq"; + interrupts = <0 190 0>; + + qcom,ee = <0>; + qcom,channel = <0>; + + #address-cells = <2>; + #size-cells = <0>; + + interrupt-controller; + #interrupt-cells = <4>; + + qcom,bus-id = <0>; + }; + diff --git a/Documentation/devicetree/bindings/spmi/spmi.yaml b/Documentation/devicetree/bindings/spmi/spmi.yaml new file mode 100644 index 000000000..c1b06fa5c --- /dev/null +++ b/Documentation/devicetree/bindings/spmi/spmi.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spmi/spmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: System Power Management Interface (SPMI) Controller + +maintainers: + - Stephen Boyd + +description: | + The System Power Management (SPMI) controller is a 2-wire bus defined + by the MIPI Alliance for power management control to be used on SoC designs. + + SPMI controllers are modelled in device tree using a generic set of + bindings defined here, plus any bus controller specific properties, if + needed. + + Each SPMI controller has zero or more child nodes (up to 16 ones), each + one representing an unique slave at the bus. + +properties: + $nodename: + pattern: "^spmi@.*" + + "#address-cells": + const: 2 + + "#size-cells": + const: 0 + +patternProperties: + "@[0-9a-f]$": + description: up to 16 child PMIC nodes + type: object + + properties: + reg: + items: + - minItems: 1 + items: + - minimum: 0 + maximum: 0xf + - enum: [ 0 ] + description: + 0 means user ID address. 1 is reserved for group ID + address. + + required: + - reg + +required: + - reg + +additionalProperties: true + +examples: + - | + #include + + spmi@0 { + reg = <0 0>; + + #address-cells = <2>; + #size-cells = <0>; + + child@0 { + reg = <0 SPMI_USID>; + }; + + child@7 { + reg = <7 SPMI_USID>; + }; + }; -- cgit v1.2.3