From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../devicetree/bindings/ufs/cdns,ufshc.yaml | 73 ++++++ .../devicetree/bindings/ufs/hisilicon,ufs.yaml | 90 ++++++++ .../devicetree/bindings/ufs/mediatek,ufs.yaml | 67 ++++++ .../devicetree/bindings/ufs/qcom,ufs.yaml | 246 +++++++++++++++++++++ .../devicetree/bindings/ufs/renesas,ufs.yaml | 61 +++++ .../bindings/ufs/samsung,exynos-ufs.yaml | 95 ++++++++ .../devicetree/bindings/ufs/snps,tc-dwc-g210.yaml | 51 +++++ .../devicetree/bindings/ufs/ti,j721e-ufs.yaml | 90 ++++++++ .../devicetree/bindings/ufs/ufs-common.yaml | 82 +++++++ 9 files changed, 855 insertions(+) create mode 100644 Documentation/devicetree/bindings/ufs/cdns,ufshc.yaml create mode 100644 Documentation/devicetree/bindings/ufs/hisilicon,ufs.yaml create mode 100644 Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml create mode 100644 Documentation/devicetree/bindings/ufs/qcom,ufs.yaml create mode 100644 Documentation/devicetree/bindings/ufs/renesas,ufs.yaml create mode 100644 Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml create mode 100644 Documentation/devicetree/bindings/ufs/snps,tc-dwc-g210.yaml create mode 100644 Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml create mode 100644 Documentation/devicetree/bindings/ufs/ufs-common.yaml (limited to 'Documentation/devicetree/bindings/ufs') diff --git a/Documentation/devicetree/bindings/ufs/cdns,ufshc.yaml b/Documentation/devicetree/bindings/ufs/cdns,ufshc.yaml new file mode 100644 index 000000000..835e17269 --- /dev/null +++ b/Documentation/devicetree/bindings/ufs/cdns,ufshc.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ufs/cdns,ufshc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence Universal Flash Storage (UFS) Controller + +maintainers: + - Jan Kotas + +# Select only our matches, not all jedec,ufs-2.0 +select: + properties: + compatible: + contains: + enum: + - cdns,ufshc + - cdns,ufshc-m31-16nm + required: + - compatible + +allOf: + - $ref: ufs-common.yaml + +properties: + compatible: + items: + - enum: + - cdns,ufshc + # CDNS UFS HC + M31 16nm PHY + - cdns,ufshc-m31-16nm + - const: jedec,ufs-2.0 + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + minItems: 1 + items: + - const: core_clk + - const: phy_clk + - const: ref_clk + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + + dma-coherent: true + +required: + - compatible + - clocks + - clock-names + - reg + +unevaluatedProperties: false + +examples: + - | + #include + + ufs@fd030000 { + compatible = "cdns,ufshc", "jedec,ufs-2.0"; + reg = <0xfd030000 0x10000>; + interrupts = ; + freq-table-hz = <0 0>, <0 0>; + clocks = <&ufs_core_clk>, <&ufs_phy_clk>; + clock-names = "core_clk", "phy_clk"; + }; diff --git a/Documentation/devicetree/bindings/ufs/hisilicon,ufs.yaml b/Documentation/devicetree/bindings/ufs/hisilicon,ufs.yaml new file mode 100644 index 000000000..4432bfa0c --- /dev/null +++ b/Documentation/devicetree/bindings/ufs/hisilicon,ufs.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ufs/hisilicon,ufs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HiSilicon Universal Flash Storage (UFS) Controller + +maintainers: + - Li Wei + +# Select only our matches, not all jedec,ufs +select: + properties: + compatible: + contains: + enum: + - hisilicon,hi3660-ufs + - hisilicon,hi3670-ufs + required: + - compatible + +allOf: + - $ref: ufs-common.yaml + +properties: + compatible: + oneOf: + - items: + - const: hisilicon,hi3660-ufs + - const: jedec,ufs-1.1 + - items: + - enum: + - hisilicon,hi3670-ufs + - const: jedec,ufs-2.1 + + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + items: + - const: ref_clk + - const: phy_clk + + reg: + items: + - description: UFS register address space + - description: UFS SYS CTRL register address space + + resets: + maxItems: 1 + + reset-names: + items: + - const: rst + +required: + - compatible + - reg + - resets + - reset-names + +unevaluatedProperties: false + +examples: + - | + #include + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + + ufs@ff3c0000 { + compatible = "hisilicon,hi3670-ufs", "jedec,ufs-2.1"; + reg = <0x0 0xff3c0000 0x0 0x1000>, + <0x0 0xff3e0000 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = ; + clocks = <&crg_ctrl HI3670_CLK_GATE_UFSIO_REF>, + <&crg_ctrl HI3670_CLK_GATE_UFS_SUBSYS>; + clock-names = "ref_clk", "phy_clk"; + freq-table-hz = <0 0>, + <0 0>; + + resets = <&crg_rst 0x84 12>; + reset-names = "rst"; + }; + }; diff --git a/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml b/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml new file mode 100644 index 000000000..32fd535a5 --- /dev/null +++ b/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ufs/mediatek,ufs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek Universal Flash Storage (UFS) Controller + +maintainers: + - Stanley Chu + +allOf: + - $ref: ufs-common.yaml + +properties: + compatible: + enum: + - mediatek,mt8183-ufshci + - mediatek,mt8192-ufshci + + clocks: + maxItems: 1 + + clock-names: + items: + - const: ufs + + phys: + maxItems: 1 + + reg: + maxItems: 1 + + vcc-supply: true + +required: + - compatible + - clocks + - clock-names + - phys + - reg + - vcc-supply + +unevaluatedProperties: false + +examples: + - | + #include + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + + ufs@ff3c0000 { + compatible = "mediatek,mt8183-ufshci"; + reg = <0 0x11270000 0 0x2300>; + interrupts = ; + phys = <&ufsphy>; + + clocks = <&infracfg_ao CLK_INFRA_UFS>; + clock-names = "ufs"; + freq-table-hz = <0 0>; + + vcc-supply = <&mt_pmic_vemc_ldo_reg>; + }; + }; diff --git a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml new file mode 100644 index 000000000..f2d6298d9 --- /dev/null +++ b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml @@ -0,0 +1,246 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ufs/qcom,ufs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Universal Flash Storage (UFS) Controller + +maintainers: + - Bjorn Andersson + - Andy Gross + +# Select only our matches, not all jedec,ufs-2.0 +select: + properties: + compatible: + contains: + const: qcom,ufshc + required: + - compatible + +properties: + compatible: + items: + - enum: + - qcom,msm8994-ufshc + - qcom,msm8996-ufshc + - qcom,msm8998-ufshc + - qcom,sc8280xp-ufshc + - qcom,sdm845-ufshc + - qcom,sm6350-ufshc + - qcom,sm8150-ufshc + - qcom,sm8250-ufshc + - qcom,sm8350-ufshc + - qcom,sm8450-ufshc + - const: qcom,ufshc + - const: jedec,ufs-2.0 + + clocks: + minItems: 8 + maxItems: 11 + + clock-names: + minItems: 8 + maxItems: 11 + + interconnects: + minItems: 2 + maxItems: 2 + + interconnect-names: + items: + - const: ufs-ddr + - const: cpu-ufs + + iommus: + minItems: 1 + maxItems: 2 + + phys: + maxItems: 1 + + phy-names: + items: + - const: ufsphy + + power-domains: + maxItems: 1 + + reg: + minItems: 1 + maxItems: 2 + + resets: + maxItems: 1 + + '#reset-cells': + const: 1 + + reset-names: + items: + - const: rst + + reset-gpios: + maxItems: 1 + description: + GPIO connected to the RESET pin of the UFS memory device. + +required: + - compatible + - reg + +allOf: + - $ref: ufs-common.yaml + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8998-ufshc + - qcom,sc8280xp-ufshc + - qcom,sm8250-ufshc + - qcom,sm8350-ufshc + - qcom,sm8450-ufshc + then: + properties: + clocks: + minItems: 8 + maxItems: 8 + clock-names: + items: + - const: core_clk + - const: bus_aggr_clk + - const: iface_clk + - const: core_clk_unipro + - const: ref_clk + - const: tx_lane0_sync_clk + - const: rx_lane0_sync_clk + - const: rx_lane1_sync_clk + reg: + minItems: 1 + maxItems: 1 + + - if: + properties: + compatible: + contains: + enum: + - qcom,sdm845-ufshc + - qcom,sm6350-ufshc + - qcom,sm8150-ufshc + then: + properties: + clocks: + minItems: 9 + maxItems: 9 + clock-names: + items: + - const: core_clk + - const: bus_aggr_clk + - const: iface_clk + - const: core_clk_unipro + - const: ref_clk + - const: tx_lane0_sync_clk + - const: rx_lane0_sync_clk + - const: rx_lane1_sync_clk + - const: ice_core_clk + reg: + minItems: 2 + maxItems: 2 + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8996-ufshc + then: + properties: + clocks: + minItems: 11 + maxItems: 11 + clock-names: + items: + - const: core_clk_src + - const: core_clk + - const: bus_clk + - const: bus_aggr_clk + - const: iface_clk + - const: core_clk_unipro_src + - const: core_clk_unipro + - const: core_clk_ice + - const: ref_clk + - const: tx_lane0_sync_clk + - const: rx_lane0_sync_clk + reg: + minItems: 1 + maxItems: 1 + + # TODO: define clock bindings for qcom,msm8994-ufshc + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + #include + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + + ufs@1d84000 { + compatible = "qcom,sm8450-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x3000>; + interrupts = ; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7b_2p5>; + vcc-max-microamp = <1100000>; + vccq-supply = <&vreg_l9b_1p2>; + vccq-max-microamp = <1200000>; + + power-domains = <&gcc UFS_PHY_GDSC>; + iommus = <&apps_smmu 0xe0 0x0>; + interconnects = <&aggre1_noc MASTER_UFS_MEM &mc_virt SLAVE_EBI1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_UFS_MEM_CFG>; + interconnect-names = "ufs-ddr", "cpu-ufs"; + + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + freq-table-hz = <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/ufs/renesas,ufs.yaml b/Documentation/devicetree/bindings/ufs/renesas,ufs.yaml new file mode 100644 index 000000000..f04f9f61f --- /dev/null +++ b/Documentation/devicetree/bindings/ufs/renesas,ufs.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ufs/renesas,ufs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car UFS Host Controller + +maintainers: + - Yoshihiro Shimoda + +allOf: + - $ref: ufs-common.yaml + +properties: + compatible: + const: renesas,r8a779f0-ufs + + reg: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: fck + - const: ref_clk + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - power-domains + - resets + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + + ufs: ufs@e686000 { + compatible = "renesas,r8a779f0-ufs"; + reg = <0xe6860000 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD 1514>, <&ufs30_clk>; + clock-names = "fck", "ref_clk"; + freq-table-hz = <200000000 200000000>, <38400000 38400000>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 1514>; + }; diff --git a/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml new file mode 100644 index 000000000..a99887988 --- /dev/null +++ b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ufs/samsung,exynos-ufs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung SoC series UFS host controller + +maintainers: + - Alim Akhtar + +description: | + Each Samsung UFS host controller instance should have its own node. + +allOf: + - $ref: ufs-common.yaml + +properties: + compatible: + enum: + - samsung,exynos7-ufs + - samsung,exynosautov9-ufs + - samsung,exynosautov9-ufs-vh + - tesla,fsd-ufs + + reg: + items: + - description: HCI register + - description: vendor specific register + - description: unipro register + - description: UFS protector register + + reg-names: + items: + - const: hci + - const: vs_hci + - const: unipro + - const: ufsp + + clocks: + items: + - description: ufs link core clock + - description: unipro main clock + + clock-names: + items: + - const: core_clk + - const: sclk_unipro_main + + phys: + maxItems: 1 + + phy-names: + const: ufs-phy + + samsung,sysreg: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + description: Should be phandle/offset pair. The phandle to the syscon node + which indicates the FSYSx sysreg interface and the offset of + the control register for UFS io coherency setting. + + dma-coherent: true + +required: + - compatible + - reg + - phys + - phy-names + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include + #include + + ufs: ufs@15570000 { + compatible = "samsung,exynos7-ufs"; + reg = <0x15570000 0x100>, + <0x15570100 0x100>, + <0x15571000 0x200>, + <0x15572000 0x300>; + reg-names = "hci", "vs_hci", "unipro", "ufsp"; + interrupts = ; + clocks = <&clock_fsys1 ACLK_UFS20_LINK>, + <&clock_fsys1 SCLK_UFSUNIPRO20_USER>; + clock-names = "core_clk", "sclk_unipro_main"; + pinctrl-names = "default"; + pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>; + phys = <&ufs_phy>; + phy-names = "ufs-phy"; + }; +... diff --git a/Documentation/devicetree/bindings/ufs/snps,tc-dwc-g210.yaml b/Documentation/devicetree/bindings/ufs/snps,tc-dwc-g210.yaml new file mode 100644 index 000000000..671a70d95 --- /dev/null +++ b/Documentation/devicetree/bindings/ufs/snps,tc-dwc-g210.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ufs/snps,tc-dwc-g210.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare Universal Flash Storage (UFS) Controller + +maintainers: + - Li Wei + +# Select only our matches, not all jedec,ufs +select: + properties: + compatible: + contains: + enum: + - snps,dwc-ufshcd-1.40a + required: + - compatible + +allOf: + - $ref: ufs-common.yaml + +properties: + compatible: + items: + - enum: + - snps,g210-tc-6.00-20bit + - snps,g210-tc-6.00-40bit + - const: snps,dwc-ufshcd-1.40a + - const: jedec,ufs-2.0 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + ufs@d0000000 { + compatible = "snps,g210-tc-6.00-40bit", + "snps,dwc-ufshcd-1.40a", + "jedec,ufs-2.0"; + reg = <0xd0000000 0x10000>; + interrupts = <24>; + }; diff --git a/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml b/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml new file mode 100644 index 000000000..c5eca7735 --- /dev/null +++ b/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ufs/ti,j721e-ufs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI J721e UFS Host Controller Glue Driver + +maintainers: + - Vignesh Raghavendra + +properties: + compatible: + items: + - const: ti,j721e-ufs + + reg: + maxItems: 1 + description: address of TI UFS glue registers + + clocks: + maxItems: 1 + description: phandle to the M-PHY clock + + power-domains: + maxItems: 1 + + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + + "#address-cells": + const: 2 + + "#size-cells": + const: 2 + + ranges: true + +required: + - compatible + - reg + - clocks + - power-domains + +patternProperties: + "^ufs@[0-9a-f]+$": + $ref: cdns,ufshc.yaml + description: | + Cadence UFS controller node must be the child node. + unevaluatedProperties: false + +additionalProperties: false + +examples: + - | + #include + #include + + bus { + #address-cells = <2>; + #size-cells = <2>; + + ufs-wrapper@4e80000 { + compatible = "ti,j721e-ufs"; + reg = <0x0 0x4e80000 0x0 0x100>; + power-domains = <&k3_pds 277>; + clocks = <&k3_clks 277 1>; + assigned-clocks = <&k3_clks 277 1>; + assigned-clock-parents = <&k3_clks 277 4>; + + ranges = <0x0 0x0 0x0 0x4e80000 0x0 0x14000>; + #address-cells = <2>; + #size-cells = <2>; + + ufs@4000 { + compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0"; + reg = <0x0 0x4000 0x0 0x10000>; + interrupts = ; + freq-table-hz = <19200000 19200000>; + power-domains = <&k3_pds 277>; + clocks = <&k3_clks 277 1>; + assigned-clocks = <&k3_clks 277 1>; + assigned-clock-parents = <&k3_clks 277 4>; + clock-names = "core_clk"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/ufs/ufs-common.yaml b/Documentation/devicetree/bindings/ufs/ufs-common.yaml new file mode 100644 index 000000000..47a4e9e1a --- /dev/null +++ b/Documentation/devicetree/bindings/ufs/ufs-common.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ufs/ufs-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common properties for Universal Flash Storage (UFS) Host Controllers + +maintainers: + - Alim Akhtar + - Avri Altman + +properties: + clocks: true + + clock-names: true + + freq-table-hz: + items: + items: + - description: Minimum frequency for given clock in Hz + - description: Maximum frequency for given clock in Hz + description: | + Array of operating frequencies in Hz stored in the same order + as the clocks property. If this property is not defined or a value in the + array is "0" then it is assumed that the frequency is set by the parent + clock or a fixed rate clock source. + + interrupts: + maxItems: 1 + + lanes-per-direction: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2] + default: 2 + description: + Number of lanes available per direction. Note that it is assume same + number of lanes is used both directions at once. + + vdd-hba-supply: + description: + Phandle to UFS host controller supply regulator node. + + vcc-supply: + description: + Phandle to VCC supply regulator node. + + vccq-supply: + description: + Phandle to VCCQ supply regulator node. + + vccq2-supply: + description: + Phandle to VCCQ2 supply regulator node. + + vcc-supply-1p8: + type: boolean + description: + For embedded UFS devices, valid VCC range is 1.7-1.95V or 2.7-3.6V. This + boolean property when set, specifies to use low voltage range of + 1.7-1.95V. Note for external UFS cards this property is invalid and valid + VCC range is always 2.7-3.6V. + + vcc-max-microamp: + description: + Specifies max. load that can be drawn from VCC supply. + + vccq-max-microamp: + description: + Specifies max. load that can be drawn from VCCQ supply. + + vccq2-max-microamp: + description: + Specifies max. load that can be drawn from VCCQ2 supply. + +dependencies: + freq-table-hz: [ 'clocks' ] + +required: + - interrupts + +additionalProperties: true -- cgit v1.2.3