From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- Documentation/driver-api/media/drivers/dvb-usb.rst | 357 +++++++++++++++++++++ 1 file changed, 357 insertions(+) create mode 100644 Documentation/driver-api/media/drivers/dvb-usb.rst (limited to 'Documentation/driver-api/media/drivers/dvb-usb.rst') diff --git a/Documentation/driver-api/media/drivers/dvb-usb.rst b/Documentation/driver-api/media/drivers/dvb-usb.rst new file mode 100644 index 000000000..b2d5d9e62 --- /dev/null +++ b/Documentation/driver-api/media/drivers/dvb-usb.rst @@ -0,0 +1,357 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Idea behind the dvb-usb-framework +================================= + +.. note:: + + #) This documentation is outdated. Please check at the DVB wiki + at https://linuxtv.org/wiki for more updated info. + + #) **deprecated:** Newer DVB USB drivers should use the dvb-usb-v2 framework. + +In March 2005 I got the new Twinhan USB2.0 DVB-T device. They provided specs +and a firmware. + +Quite keen I wanted to put the driver (with some quirks of course) into dibusb. +After reading some specs and doing some USB snooping, it realized, that the +dibusb-driver would be a complete mess afterwards. So I decided to do it in a +different way: With the help of a dvb-usb-framework. + +The framework provides generic functions (mostly kernel API calls), such as: + +- Transport Stream URB handling in conjunction with dvb-demux-feed-control + (bulk and isoc are supported) +- registering the device for the DVB-API +- registering an I2C-adapter if applicable +- remote-control/input-device handling +- firmware requesting and loading (currently just for the Cypress USB + controllers) +- other functions/methods which can be shared by several drivers (such as + functions for bulk-control-commands) +- TODO: a I2C-chunker. It creates device-specific chunks of register-accesses + depending on length of a register and the number of values that can be + multi-written and multi-read. + +The source code of the particular DVB USB devices does just the communication +with the device via the bus. The connection between the DVB-API-functionality +is done via callbacks, assigned in a static device-description (struct +dvb_usb_device) each device-driver has to have. + +For an example have a look in drivers/media/usb/dvb-usb/vp7045*. + +Objective is to migrate all the usb-devices (dibusb, cinergyT2, maybe the +ttusb; flexcop-usb already benefits from the generic flexcop-device) to use +the dvb-usb-lib. + +TODO: dynamic enabling and disabling of the pid-filter in regard to number of +feeds requested. + +Supported devices +----------------- + +See the LinuxTV DVB Wiki at https://linuxtv.org for a complete list of +cards/drivers/firmwares: +https://linuxtv.org/wiki/index.php/DVB_USB + +0. History & News: + + 2005-06-30 + + - added support for WideView WT-220U (Thanks to Steve Chang) + + 2005-05-30 + + - added basic isochronous support to the dvb-usb-framework + - added support for Conexant Hybrid reference design and Nebula + DigiTV USB + + 2005-04-17 + + - all dibusb devices ported to make use of the dvb-usb-framework + + 2005-04-02 + + - re-enabled and improved remote control code. + + 2005-03-31 + + - ported the Yakumo/Hama/Typhoon DVB-T USB2.0 device to dvb-usb. + + 2005-03-30 + + - first commit of the dvb-usb-module based on the dibusb-source. + First device is a new driver for the + TwinhanDTV Alpha / MagicBox II USB2.0-only DVB-T device. + - (change from dvb-dibusb to dvb-usb) + + 2005-03-28 + + - added support for the AVerMedia AverTV DVB-T USB2.0 device + (Thanks to Glen Harris and Jiun-Kuei Jung, AVerMedia) + + 2005-03-14 + + - added support for the Typhoon/Yakumo/HAMA DVB-T mobile USB2.0 + + 2005-02-11 + + - added support for the KWorld/ADSTech Instant DVB-T USB2.0. + Thanks a lot to Joachim von Caron + + 2005-02-02 + - added support for the Hauppauge Win-TV Nova-T USB2 + + 2005-01-31 + - distorted streaming is gone for USB1.1 devices + + 2005-01-13 + + - moved the mirrored pid_filter_table back to dvb-dibusb + first almost working version for HanfTek UMT-010 + found out, that Yakumo/HAMA/Typhoon are predecessors of the HanfTek UMT-010 + + 2005-01-10 + + - refactoring completed, now everything is very delightful + + - tuner quirks for some weird devices (Artec T1 AN2235 device has sometimes a + Panasonic Tuner assembled). Tunerprobing implemented. + Thanks a lot to Gunnar Wittich. + + 2004-12-29 + + - after several days of struggling around bug of no returning URBs fixed. + + 2004-12-26 + + - refactored the dibusb-driver, split into separate files + - i2c-probing enabled + + 2004-12-06 + + - possibility for demod i2c-address probing + - new usb IDs (Compro, Artec) + + 2004-11-23 + + - merged changes from DiB3000MC_ver2.1 + - revised the debugging + - possibility to deliver the complete TS for USB2.0 + + 2004-11-21 + + - first working version of the dib3000mc/p frontend driver. + + 2004-11-12 + + - added additional remote control keys. Thanks to Uwe Hanke. + + 2004-11-07 + + - added remote control support. Thanks to David Matthews. + + 2004-11-05 + + - added support for a new devices (Grandtec/Avermedia/Artec) + - merged my changes (for dib3000mb/dibusb) to the FE_REFACTORING, because it became HEAD + - moved transfer control (pid filter, fifo control) from usb driver to frontend, it seems + better settled there (added xfer_ops-struct) + - created a common files for frontends (mc/p/mb) + + 2004-09-28 + + - added support for a new device (Unknown, vendor ID is Hyper-Paltek) + + 2004-09-20 + + - added support for a new device (Compro DVB-U2000), thanks + to Amaury Demol for reporting + - changed usb TS transfer method (several urbs, stopping transfer + before setting a new pid) + + 2004-09-13 + + - added support for a new device (Artec T1 USB TVBOX), thanks + to Christian Motschke for reporting + + 2004-09-05 + + - released the dibusb device and dib3000mb-frontend driver + (old news for vp7041.c) + + 2004-07-15 + + - found out, by accident, that the device has a TUA6010XS for PLL + + 2004-07-12 + + - figured out, that the driver should also work with the + CTS Portable (Chinese Television System) + + 2004-07-08 + + - firmware-extraction-2.422-problem solved, driver is now working + properly with firmware extracted from 2.422 + - #if for 2.6.4 (dvb), compile issue + - changed firmware handling, see vp7041.txt sec 1.1 + + 2004-07-02 + + - some tuner modifications, v0.1, cleanups, first public + + 2004-06-28 + + - now using the dvb_dmx_swfilter_packets, everything runs fine now + + 2004-06-27 + + - able to watch and switching channels (pre-alpha) + - no section filtering yet + + 2004-06-06 + + - first TS received, but kernel oops :/ + + 2004-05-14 + + - firmware loader is working + + 2004-05-11 + + - start writing the driver + +How to use? +----------- + +Firmware +~~~~~~~~ + +Most of the USB drivers need to download a firmware to the device before start +working. + +Have a look at the Wikipage for the DVB-USB-drivers to find out, which firmware +you need for your device: + +https://linuxtv.org/wiki/index.php/DVB_USB + +Compiling +~~~~~~~~~ + +Since the driver is in the linux kernel, activating the driver in +your favorite config-environment should sufficient. I recommend +to compile the driver as module. Hotplug does the rest. + +If you use dvb-kernel enter the build-2.6 directory run 'make' and 'insmod.sh +load' afterwards. + +Loading the drivers +~~~~~~~~~~~~~~~~~~~ + +Hotplug is able to load the driver, when it is needed (because you plugged +in the device). + +If you want to enable debug output, you have to load the driver manually and +from within the dvb-kernel cvs repository. + +first have a look, which debug level are available: + +.. code-block:: none + + # modinfo dvb-usb + # modinfo dvb-usb-vp7045 + + etc. + +.. code-block:: none + + modprobe dvb-usb debug= + modprobe dvb-usb-vp7045 debug= + etc. + +should do the trick. + +When the driver is loaded successfully, the firmware file was in +the right place and the device is connected, the "Power"-LED should be +turned on. + +At this point you should be able to start a dvb-capable application. I'm use +(t|s)zap, mplayer and dvbscan to test the basics. VDR-xine provides the +long-term test scenario. + +Known problems and bugs +----------------------- + +- Don't remove the USB device while running an DVB application, your system + will go crazy or die most likely. + +Adding support for devices +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +TODO + +USB1.1 Bandwidth limitation +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +A lot of the currently supported devices are USB1.1 and thus they have a +maximum bandwidth of about 5-6 MBit/s when connected to a USB2.0 hub. +This is not enough for receiving the complete transport stream of a +DVB-T channel (which is about 16 MBit/s). Normally this is not a +problem, if you only want to watch TV (this does not apply for HDTV), +but watching a channel while recording another channel on the same +frequency simply does not work very well. This applies to all USB1.1 +DVB-T devices, not just the dvb-usb-devices) + +The bug, where the TS is distorted by a heavy usage of the device is gone +definitely. All dvb-usb-devices I was using (Twinhan, Kworld, DiBcom) are +working like charm now with VDR. Sometimes I even was able to record a channel +and watch another one. + +Comments +~~~~~~~~ + +Patches, comments and suggestions are very very welcome. + +3. Acknowledgements +------------------- + + Amaury Demol (Amaury.Demol@parrot.com) and Francois Kanounnikoff from DiBcom for + providing specs, code and help, on which the dvb-dibusb, dib3000mb and + dib3000mc are based. + + David Matthews for identifying a new device type (Artec T1 with AN2235) + and for extending dibusb with remote control event handling. Thank you. + + Alex Woods for frequently answering question about usb and dvb + stuff, a big thank you. + + Bernd Wagner for helping with huge bug reports and discussions. + + Gunnar Wittich and Joachim von Caron for their trust for providing + root-shells on their machines to implement support for new devices. + + Allan Third and Michael Hutchinson for their help to write the Nebula + digitv-driver. + + Glen Harris for bringing up, that there is a new dibusb-device and Jiun-Kuei + Jung from AVerMedia who kindly provided a special firmware to get the device + up and running in Linux. + + Jennifer Chen, Jeff and Jack from Twinhan for kindly supporting by + writing the vp7045-driver. + + Steve Chang from WideView for providing information for new devices and + firmware files. + + Michael Paxton for submitting remote control keymaps. + + Some guys on the linux-dvb mailing list for encouraging me. + + Peter Schildmann >peter.schildmann-nospam-at-web.de< for his + user-level firmware loader, which saves a lot of time + (when writing the vp7041 driver) + + Ulf Hermenau for helping me out with traditional chinese. + + André Smoktun and Christian Frömmel for supporting me with + hardware and listening to my problems very patiently. -- cgit v1.2.3