From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- Documentation/driver-api/rapidio/mport_cdev.rst | 110 ++++++++++++++++++++++++ 1 file changed, 110 insertions(+) create mode 100644 Documentation/driver-api/rapidio/mport_cdev.rst (limited to 'Documentation/driver-api/rapidio/mport_cdev.rst') diff --git a/Documentation/driver-api/rapidio/mport_cdev.rst b/Documentation/driver-api/rapidio/mport_cdev.rst new file mode 100644 index 000000000..df77a7f7b --- /dev/null +++ b/Documentation/driver-api/rapidio/mport_cdev.rst @@ -0,0 +1,110 @@ +================================================================== +RapidIO subsystem mport character device driver (rio_mport_cdev.c) +================================================================== + +1. Overview +=========== + +This device driver is the result of collaboration within the RapidIO.org +Software Task Group (STG) between Texas Instruments, Freescale, +Prodrive Technologies, Nokia Networks, BAE and IDT. Additional input was +received from other members of RapidIO.org. The objective was to create a +character mode driver interface which exposes the capabilities of RapidIO +devices directly to applications, in a manner that allows the numerous and +varied RapidIO implementations to interoperate. + +This driver (MPORT_CDEV) provides access to basic RapidIO subsystem operations +for user-space applications. Most of RapidIO operations are supported through +'ioctl' system calls. + +When loaded this device driver creates filesystem nodes named rio_mportX in /dev +directory for each registered RapidIO mport device. 'X' in the node name matches +to unique port ID assigned to each local mport device. + +Using available set of ioctl commands user-space applications can perform +following RapidIO bus and subsystem operations: + +- Reads and writes from/to configuration registers of mport devices + (RIO_MPORT_MAINT_READ_LOCAL/RIO_MPORT_MAINT_WRITE_LOCAL) +- Reads and writes from/to configuration registers of remote RapidIO devices. + This operations are defined as RapidIO Maintenance reads/writes in RIO spec. + (RIO_MPORT_MAINT_READ_REMOTE/RIO_MPORT_MAINT_WRITE_REMOTE) +- Set RapidIO Destination ID for mport devices (RIO_MPORT_MAINT_HDID_SET) +- Set RapidIO Component Tag for mport devices (RIO_MPORT_MAINT_COMPTAG_SET) +- Query logical index of mport devices (RIO_MPORT_MAINT_PORT_IDX_GET) +- Query capabilities and RapidIO link configuration of mport devices + (RIO_MPORT_GET_PROPERTIES) +- Enable/Disable reporting of RapidIO doorbell events to user-space applications + (RIO_ENABLE_DOORBELL_RANGE/RIO_DISABLE_DOORBELL_RANGE) +- Enable/Disable reporting of RIO port-write events to user-space applications + (RIO_ENABLE_PORTWRITE_RANGE/RIO_DISABLE_PORTWRITE_RANGE) +- Query/Control type of events reported through this driver: doorbells, + port-writes or both (RIO_SET_EVENT_MASK/RIO_GET_EVENT_MASK) +- Configure/Map mport's outbound requests window(s) for specific size, + RapidIO destination ID, hopcount and request type + (RIO_MAP_OUTBOUND/RIO_UNMAP_OUTBOUND) +- Configure/Map mport's inbound requests window(s) for specific size, + RapidIO base address and local memory base address + (RIO_MAP_INBOUND/RIO_UNMAP_INBOUND) +- Allocate/Free contiguous DMA coherent memory buffer for DMA data transfers + to/from remote RapidIO devices (RIO_ALLOC_DMA/RIO_FREE_DMA) +- Initiate DMA data transfers to/from remote RapidIO devices (RIO_TRANSFER). + Supports blocking, asynchronous and posted (a.k.a 'fire-and-forget') data + transfer modes. +- Check/Wait for completion of asynchronous DMA data transfer + (RIO_WAIT_FOR_ASYNC) +- Manage device objects supported by RapidIO subsystem (RIO_DEV_ADD/RIO_DEV_DEL). + This allows implementation of various RapidIO fabric enumeration algorithms + as user-space applications while using remaining functionality provided by + kernel RapidIO subsystem. + +2. Hardware Compatibility +========================= + +This device driver uses standard interfaces defined by kernel RapidIO subsystem +and therefore it can be used with any mport device driver registered by RapidIO +subsystem with limitations set by available mport implementation. + +At this moment the most common limitation is availability of RapidIO-specific +DMA engine framework for specific mport device. Users should verify available +functionality of their platform when planning to use this driver: + +- IDT Tsi721 PCIe-to-RapidIO bridge device and its mport device driver are fully + compatible with this driver. +- Freescale SoCs 'fsl_rio' mport driver does not have implementation for RapidIO + specific DMA engine support and therefore DMA data transfers mport_cdev driver + are not available. + +3. Module parameters +==================== + +- 'dma_timeout' + - DMA transfer completion timeout (in msec, default value 3000). + This parameter set a maximum completion wait time for SYNC mode DMA + transfer requests and for RIO_WAIT_FOR_ASYNC ioctl requests. + +- 'dbg_level' + - This parameter allows to control amount of debug information + generated by this device driver. This parameter is formed by set of + bit masks that correspond to the specific functional blocks. + For mask definitions see 'drivers/rapidio/devices/rio_mport_cdev.c' + This parameter can be changed dynamically. + Use CONFIG_RAPIDIO_DEBUG=y to enable debug output at the top level. + +4. Known problems +================= + + None. + +5. User-space Applications and API +================================== + +API library and applications that use this device driver are available from +RapidIO.org. + +6. TODO List +============ + +- Add support for sending/receiving "raw" RapidIO messaging packets. +- Add memory mapped DMA data transfers as an option when RapidIO-specific DMA + is not available. -- cgit v1.2.3