From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- Documentation/fault-injection/fault-injection.rst | 478 ++++++++++++++++++++++ 1 file changed, 478 insertions(+) create mode 100644 Documentation/fault-injection/fault-injection.rst (limited to 'Documentation/fault-injection/fault-injection.rst') diff --git a/Documentation/fault-injection/fault-injection.rst b/Documentation/fault-injection/fault-injection.rst new file mode 100644 index 000000000..5f6454b9d --- /dev/null +++ b/Documentation/fault-injection/fault-injection.rst @@ -0,0 +1,478 @@ +=========================================== +Fault injection capabilities infrastructure +=========================================== + +See also drivers/md/md-faulty.c and "every_nth" module option for scsi_debug. + + +Available fault injection capabilities +-------------------------------------- + +- failslab + + injects slab allocation failures. (kmalloc(), kmem_cache_alloc(), ...) + +- fail_page_alloc + + injects page allocation failures. (alloc_pages(), get_free_pages(), ...) + +- fail_usercopy + + injects failures in user memory access functions. (copy_from_user(), get_user(), ...) + +- fail_futex + + injects futex deadlock and uaddr fault errors. + +- fail_sunrpc + + injects kernel RPC client and server failures. + +- fail_make_request + + injects disk IO errors on devices permitted by setting + /sys/block//make-it-fail or + /sys/block///make-it-fail. (submit_bio_noacct()) + +- fail_mmc_request + + injects MMC data errors on devices permitted by setting + debugfs entries under /sys/kernel/debug/mmc0/fail_mmc_request + +- fail_function + + injects error return on specific functions, which are marked by + ALLOW_ERROR_INJECTION() macro, by setting debugfs entries + under /sys/kernel/debug/fail_function. No boot option supported. + +- NVMe fault injection + + inject NVMe status code and retry flag on devices permitted by setting + debugfs entries under /sys/kernel/debug/nvme*/fault_inject. The default + status code is NVME_SC_INVALID_OPCODE with no retry. The status code and + retry flag can be set via the debugfs. + + +Configure fault-injection capabilities behavior +----------------------------------------------- + +debugfs entries +^^^^^^^^^^^^^^^ + +fault-inject-debugfs kernel module provides some debugfs entries for runtime +configuration of fault-injection capabilities. + +- /sys/kernel/debug/fail*/probability: + + likelihood of failure injection, in percent. + + Format: + + Note that one-failure-per-hundred is a very high error rate + for some testcases. Consider setting probability=100 and configure + /sys/kernel/debug/fail*/interval for such testcases. + +- /sys/kernel/debug/fail*/interval: + + specifies the interval between failures, for calls to + should_fail() that pass all the other tests. + + Note that if you enable this, by setting interval>1, you will + probably want to set probability=100. + +- /sys/kernel/debug/fail*/times: + + specifies how many times failures may happen at most. A value of -1 + means "no limit". + +- /sys/kernel/debug/fail*/space: + + specifies an initial resource "budget", decremented by "size" + on each call to should_fail(,size). Failure injection is + suppressed until "space" reaches zero. + +- /sys/kernel/debug/fail*/verbose + + Format: { 0 | 1 | 2 } + + specifies the verbosity of the messages when failure is + injected. '0' means no messages; '1' will print only a single + log line per failure; '2' will print a call trace too -- useful + to debug the problems revealed by fault injection. + +- /sys/kernel/debug/fail*/task-filter: + + Format: { 'Y' | 'N' } + + A value of 'N' disables filtering by process (default). + Any positive value limits failures to only processes indicated by + /proc//make-it-fail==1. + +- /sys/kernel/debug/fail*/require-start, + /sys/kernel/debug/fail*/require-end, + /sys/kernel/debug/fail*/reject-start, + /sys/kernel/debug/fail*/reject-end: + + specifies the range of virtual addresses tested during + stacktrace walking. Failure is injected only if some caller + in the walked stacktrace lies within the required range, and + none lies within the rejected range. + Default required range is [0,ULONG_MAX) (whole of virtual address space). + Default rejected range is [0,0). + +- /sys/kernel/debug/fail*/stacktrace-depth: + + specifies the maximum stacktrace depth walked during search + for a caller within [require-start,require-end) OR + [reject-start,reject-end). + +- /sys/kernel/debug/fail_page_alloc/ignore-gfp-highmem: + + Format: { 'Y' | 'N' } + + default is 'Y', setting it to 'N' will also inject failures into + highmem/user allocations (__GFP_HIGHMEM allocations). + +- /sys/kernel/debug/failslab/ignore-gfp-wait: +- /sys/kernel/debug/fail_page_alloc/ignore-gfp-wait: + + Format: { 'Y' | 'N' } + + default is 'Y', setting it to 'N' will also inject failures + into allocations that can sleep (__GFP_DIRECT_RECLAIM allocations). + +- /sys/kernel/debug/fail_page_alloc/min-order: + + specifies the minimum page allocation order to be injected + failures. + +- /sys/kernel/debug/fail_futex/ignore-private: + + Format: { 'Y' | 'N' } + + default is 'N', setting it to 'Y' will disable failure injections + when dealing with private (address space) futexes. + +- /sys/kernel/debug/fail_sunrpc/ignore-client-disconnect: + + Format: { 'Y' | 'N' } + + default is 'N', setting it to 'Y' will disable disconnect + injection on the RPC client. + +- /sys/kernel/debug/fail_sunrpc/ignore-server-disconnect: + + Format: { 'Y' | 'N' } + + default is 'N', setting it to 'Y' will disable disconnect + injection on the RPC server. + +- /sys/kernel/debug/fail_sunrpc/ignore-cache-wait: + + Format: { 'Y' | 'N' } + + default is 'N', setting it to 'Y' will disable cache wait + injection on the RPC server. + +- /sys/kernel/debug/fail_function/inject: + + Format: { 'function-name' | '!function-name' | '' } + + specifies the target function of error injection by name. + If the function name leads '!' prefix, given function is + removed from injection list. If nothing specified ('') + injection list is cleared. + +- /sys/kernel/debug/fail_function/injectable: + + (read only) shows error injectable functions and what type of + error values can be specified. The error type will be one of + below; + - NULL: retval must be 0. + - ERRNO: retval must be -1 to -MAX_ERRNO (-4096). + - ERR_NULL: retval must be 0 or -1 to -MAX_ERRNO (-4096). + +- /sys/kernel/debug/fail_function//retval: + + specifies the "error" return value to inject to the given function. + This will be created when the user specifies a new injection entry. + Note that this file only accepts unsigned values. So, if you want to + use a negative errno, you better use 'printf' instead of 'echo', e.g.: + $ printf %#x -12 > retval + +Boot option +^^^^^^^^^^^ + +In order to inject faults while debugfs is not available (early boot time), +use the boot option:: + + failslab= + fail_page_alloc= + fail_usercopy= + fail_make_request= + fail_futex= + mmc_core.fail_request=,,, + +proc entries +^^^^^^^^^^^^ + +- /proc//fail-nth, + /proc/self/task//fail-nth: + + Write to this file of integer N makes N-th call in the task fail. + Read from this file returns a integer value. A value of '0' indicates + that the fault setup with a previous write to this file was injected. + A positive integer N indicates that the fault wasn't yet injected. + Note that this file enables all types of faults (slab, futex, etc). + This setting takes precedence over all other generic debugfs settings + like probability, interval, times, etc. But per-capability settings + (e.g. fail_futex/ignore-private) take precedence over it. + + This feature is intended for systematic testing of faults in a single + system call. See an example below. + +How to add new fault injection capability +----------------------------------------- + +- #include + +- define the fault attributes + + DECLARE_FAULT_ATTR(name); + + Please see the definition of struct fault_attr in fault-inject.h + for details. + +- provide a way to configure fault attributes + +- boot option + + If you need to enable the fault injection capability from boot time, you can + provide boot option to configure it. There is a helper function for it: + + setup_fault_attr(attr, str); + +- debugfs entries + + failslab, fail_page_alloc, fail_usercopy, and fail_make_request use this way. + Helper functions: + + fault_create_debugfs_attr(name, parent, attr); + +- module parameters + + If the scope of the fault injection capability is limited to a + single kernel module, it is better to provide module parameters to + configure the fault attributes. + +- add a hook to insert failures + + Upon should_fail() returning true, client code should inject a failure: + + should_fail(attr, size); + +Application Examples +-------------------- + +- Inject slab allocation failures into module init/exit code:: + + #!/bin/bash + + FAILTYPE=failslab + echo Y > /sys/kernel/debug/$FAILTYPE/task-filter + echo 10 > /sys/kernel/debug/$FAILTYPE/probability + echo 100 > /sys/kernel/debug/$FAILTYPE/interval + echo -1 > /sys/kernel/debug/$FAILTYPE/times + echo 0 > /sys/kernel/debug/$FAILTYPE/space + echo 2 > /sys/kernel/debug/$FAILTYPE/verbose + echo Y > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait + + faulty_system() + { + bash -c "echo 1 > /proc/self/make-it-fail && exec $*" + } + + if [ $# -eq 0 ] + then + echo "Usage: $0 modulename [ modulename ... ]" + exit 1 + fi + + for m in $* + do + echo inserting $m... + faulty_system modprobe $m + + echo removing $m... + faulty_system modprobe -r $m + done + +------------------------------------------------------------------------------ + +- Inject page allocation failures only for a specific module:: + + #!/bin/bash + + FAILTYPE=fail_page_alloc + module=$1 + + if [ -z $module ] + then + echo "Usage: $0 " + exit 1 + fi + + modprobe $module + + if [ ! -d /sys/module/$module/sections ] + then + echo Module $module is not loaded + exit 1 + fi + + cat /sys/module/$module/sections/.text > /sys/kernel/debug/$FAILTYPE/require-start + cat /sys/module/$module/sections/.data > /sys/kernel/debug/$FAILTYPE/require-end + + echo N > /sys/kernel/debug/$FAILTYPE/task-filter + echo 10 > /sys/kernel/debug/$FAILTYPE/probability + echo 100 > /sys/kernel/debug/$FAILTYPE/interval + echo -1 > /sys/kernel/debug/$FAILTYPE/times + echo 0 > /sys/kernel/debug/$FAILTYPE/space + echo 2 > /sys/kernel/debug/$FAILTYPE/verbose + echo Y > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait + echo Y > /sys/kernel/debug/$FAILTYPE/ignore-gfp-highmem + echo 10 > /sys/kernel/debug/$FAILTYPE/stacktrace-depth + + trap "echo 0 > /sys/kernel/debug/$FAILTYPE/probability" SIGINT SIGTERM EXIT + + echo "Injecting errors into the module $module... (interrupt to stop)" + sleep 1000000 + +------------------------------------------------------------------------------ + +- Inject open_ctree error while btrfs mount:: + + #!/bin/bash + + rm -f testfile.img + dd if=/dev/zero of=testfile.img bs=1M seek=1000 count=1 + DEVICE=$(losetup --show -f testfile.img) + mkfs.btrfs -f $DEVICE + mkdir -p tmpmnt + + FAILTYPE=fail_function + FAILFUNC=open_ctree + echo $FAILFUNC > /sys/kernel/debug/$FAILTYPE/inject + printf %#x -12 > /sys/kernel/debug/$FAILTYPE/$FAILFUNC/retval + echo N > /sys/kernel/debug/$FAILTYPE/task-filter + echo 100 > /sys/kernel/debug/$FAILTYPE/probability + echo 0 > /sys/kernel/debug/$FAILTYPE/interval + echo -1 > /sys/kernel/debug/$FAILTYPE/times + echo 0 > /sys/kernel/debug/$FAILTYPE/space + echo 1 > /sys/kernel/debug/$FAILTYPE/verbose + + mount -t btrfs $DEVICE tmpmnt + if [ $? -ne 0 ] + then + echo "SUCCESS!" + else + echo "FAILED!" + umount tmpmnt + fi + + echo > /sys/kernel/debug/$FAILTYPE/inject + + rmdir tmpmnt + losetup -d $DEVICE + rm testfile.img + + +Tool to run command with failslab or fail_page_alloc +---------------------------------------------------- +In order to make it easier to accomplish the tasks mentioned above, we can use +tools/testing/fault-injection/failcmd.sh. Please run a command +"./tools/testing/fault-injection/failcmd.sh --help" for more information and +see the following examples. + +Examples: + +Run a command "make -C tools/testing/selftests/ run_tests" with injecting slab +allocation failure:: + + # ./tools/testing/fault-injection/failcmd.sh \ + -- make -C tools/testing/selftests/ run_tests + +Same as above except to specify 100 times failures at most instead of one time +at most by default:: + + # ./tools/testing/fault-injection/failcmd.sh --times=100 \ + -- make -C tools/testing/selftests/ run_tests + +Same as above except to inject page allocation failure instead of slab +allocation failure:: + + # env FAILCMD_TYPE=fail_page_alloc \ + ./tools/testing/fault-injection/failcmd.sh --times=100 \ + -- make -C tools/testing/selftests/ run_tests + +Systematic faults using fail-nth +--------------------------------- + +The following code systematically faults 0-th, 1-st, 2-nd and so on +capabilities in the socketpair() system call:: + + #include + #include + #include + #include + #include + #include + #include + #include + #include + #include + + int main() + { + int i, err, res, fail_nth, fds[2]; + char buf[128]; + + system("echo N > /sys/kernel/debug/failslab/ignore-gfp-wait"); + sprintf(buf, "/proc/self/task/%ld/fail-nth", syscall(SYS_gettid)); + fail_nth = open(buf, O_RDWR); + for (i = 1;; i++) { + sprintf(buf, "%d", i); + write(fail_nth, buf, strlen(buf)); + res = socketpair(AF_LOCAL, SOCK_STREAM, 0, fds); + err = errno; + pread(fail_nth, buf, sizeof(buf), 0); + if (res == 0) { + close(fds[0]); + close(fds[1]); + } + printf("%d-th fault %c: res=%d/%d\n", i, atoi(buf) ? 'N' : 'Y', + res, err); + if (atoi(buf)) + break; + } + return 0; + } + +An example output:: + + 1-th fault Y: res=-1/23 + 2-th fault Y: res=-1/23 + 3-th fault Y: res=-1/12 + 4-th fault Y: res=-1/12 + 5-th fault Y: res=-1/23 + 6-th fault Y: res=-1/23 + 7-th fault Y: res=-1/23 + 8-th fault Y: res=-1/12 + 9-th fault Y: res=-1/12 + 10-th fault Y: res=-1/12 + 11-th fault Y: res=-1/12 + 12-th fault Y: res=-1/12 + 13-th fault Y: res=-1/12 + 14-th fault Y: res=-1/12 + 15-th fault Y: res=-1/12 + 16-th fault N: res=0/12 -- cgit v1.2.3