From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- Documentation/filesystems/ext4/directory.rst | 453 +++++++++++++++++++++++++++ 1 file changed, 453 insertions(+) create mode 100644 Documentation/filesystems/ext4/directory.rst (limited to 'Documentation/filesystems/ext4/directory.rst') diff --git a/Documentation/filesystems/ext4/directory.rst b/Documentation/filesystems/ext4/directory.rst new file mode 100644 index 000000000..6eece8e31 --- /dev/null +++ b/Documentation/filesystems/ext4/directory.rst @@ -0,0 +1,453 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Directory Entries +----------------- + +In an ext4 filesystem, a directory is more or less a flat file that maps +an arbitrary byte string (usually ASCII) to an inode number on the +filesystem. There can be many directory entries across the filesystem +that reference the same inode number--these are known as hard links, and +that is why hard links cannot reference files on other filesystems. As +such, directory entries are found by reading the data block(s) +associated with a directory file for the particular directory entry that +is desired. + +Linear (Classic) Directories +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +By default, each directory lists its entries in an “almost-linear” +array. I write “almost” because it's not a linear array in the memory +sense because directory entries are not split across filesystem blocks. +Therefore, it is more accurate to say that a directory is a series of +data blocks and that each block contains a linear array of directory +entries. The end of each per-block array is signified by reaching the +end of the block; the last entry in the block has a record length that +takes it all the way to the end of the block. The end of the entire +directory is of course signified by reaching the end of the file. Unused +directory entries are signified by inode = 0. By default the filesystem +uses ``struct ext4_dir_entry_2`` for directory entries unless the +“filetype” feature flag is not set, in which case it uses +``struct ext4_dir_entry``. + +The original directory entry format is ``struct ext4_dir_entry``, which +is at most 263 bytes long, though on disk you'll need to reference +``dirent.rec_len`` to know for sure. + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Size + - Name + - Description + * - 0x0 + - __le32 + - inode + - Number of the inode that this directory entry points to. + * - 0x4 + - __le16 + - rec_len + - Length of this directory entry. Must be a multiple of 4. + * - 0x6 + - __le16 + - name_len + - Length of the file name. + * - 0x8 + - char + - name[EXT4_NAME_LEN] + - File name. + +Since file names cannot be longer than 255 bytes, the new directory +entry format shortens the name_len field and uses the space for a file +type flag, probably to avoid having to load every inode during directory +tree traversal. This format is ``ext4_dir_entry_2``, which is at most +263 bytes long, though on disk you'll need to reference +``dirent.rec_len`` to know for sure. + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Size + - Name + - Description + * - 0x0 + - __le32 + - inode + - Number of the inode that this directory entry points to. + * - 0x4 + - __le16 + - rec_len + - Length of this directory entry. + * - 0x6 + - __u8 + - name_len + - Length of the file name. + * - 0x7 + - __u8 + - file_type + - File type code, see ftype_ table below. + * - 0x8 + - char + - name[EXT4_NAME_LEN] + - File name. + +.. _ftype: + +The directory file type is one of the following values: + +.. list-table:: + :widths: 16 64 + :header-rows: 1 + + * - Value + - Description + * - 0x0 + - Unknown. + * - 0x1 + - Regular file. + * - 0x2 + - Directory. + * - 0x3 + - Character device file. + * - 0x4 + - Block device file. + * - 0x5 + - FIFO. + * - 0x6 + - Socket. + * - 0x7 + - Symbolic link. + +To support directories that are both encrypted and casefolded directories, we +must also include hash information in the directory entry. We append +``ext4_extended_dir_entry_2`` to ``ext4_dir_entry_2`` except for the entries +for dot and dotdot, which are kept the same. The structure follows immediately +after ``name`` and is included in the size listed by ``rec_len`` If a directory +entry uses this extension, it may be up to 271 bytes. + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Size + - Name + - Description + * - 0x0 + - __le32 + - hash + - The hash of the directory name + * - 0x4 + - __le32 + - minor_hash + - The minor hash of the directory name + + +In order to add checksums to these classic directory blocks, a phony +``struct ext4_dir_entry`` is placed at the end of each leaf block to +hold the checksum. The directory entry is 12 bytes long. The inode +number and name_len fields are set to zero to fool old software into +ignoring an apparently empty directory entry, and the checksum is stored +in the place where the name normally goes. The structure is +``struct ext4_dir_entry_tail``: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Size + - Name + - Description + * - 0x0 + - __le32 + - det_reserved_zero1 + - Inode number, which must be zero. + * - 0x4 + - __le16 + - det_rec_len + - Length of this directory entry, which must be 12. + * - 0x6 + - __u8 + - det_reserved_zero2 + - Length of the file name, which must be zero. + * - 0x7 + - __u8 + - det_reserved_ft + - File type, which must be 0xDE. + * - 0x8 + - __le32 + - det_checksum + - Directory leaf block checksum. + +The leaf directory block checksum is calculated against the FS UUID, the +directory's inode number, the directory's inode generation number, and +the entire directory entry block up to (but not including) the fake +directory entry. + +Hash Tree Directories +~~~~~~~~~~~~~~~~~~~~~ + +A linear array of directory entries isn't great for performance, so a +new feature was added to ext3 to provide a faster (but peculiar) +balanced tree keyed off a hash of the directory entry name. If the +EXT4_INDEX_FL (0x1000) flag is set in the inode, this directory uses a +hashed btree (htree) to organize and find directory entries. For +backwards read-only compatibility with ext2, this tree is actually +hidden inside the directory file, masquerading as “empty” directory data +blocks! It was stated previously that the end of the linear directory +entry table was signified with an entry pointing to inode 0; this is +(ab)used to fool the old linear-scan algorithm into thinking that the +rest of the directory block is empty so that it moves on. + +The root of the tree always lives in the first data block of the +directory. By ext2 custom, the '.' and '..' entries must appear at the +beginning of this first block, so they are put here as two +``struct ext4_dir_entry_2`` s and not stored in the tree. The rest of +the root node contains metadata about the tree and finally a hash->block +map to find nodes that are lower in the htree. If +``dx_root.info.indirect_levels`` is non-zero then the htree has two +levels; the data block pointed to by the root node's map is an interior +node, which is indexed by a minor hash. Interior nodes in this tree +contains a zeroed out ``struct ext4_dir_entry_2`` followed by a +minor_hash->block map to find leafe nodes. Leaf nodes contain a linear +array of all ``struct ext4_dir_entry_2``; all of these entries +(presumably) hash to the same value. If there is an overflow, the +entries simply overflow into the next leaf node, and the +least-significant bit of the hash (in the interior node map) that gets +us to this next leaf node is set. + +To traverse the directory as a htree, the code calculates the hash of +the desired file name and uses it to find the corresponding block +number. If the tree is flat, the block is a linear array of directory +entries that can be searched; otherwise, the minor hash of the file name +is computed and used against this second block to find the corresponding +third block number. That third block number will be a linear array of +directory entries. + +To traverse the directory as a linear array (such as the old code does), +the code simply reads every data block in the directory. The blocks used +for the htree will appear to have no entries (aside from '.' and '..') +and so only the leaf nodes will appear to have any interesting content. + +The root of the htree is in ``struct dx_root``, which is the full length +of a data block: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Type + - Name + - Description + * - 0x0 + - __le32 + - dot.inode + - inode number of this directory. + * - 0x4 + - __le16 + - dot.rec_len + - Length of this record, 12. + * - 0x6 + - u8 + - dot.name_len + - Length of the name, 1. + * - 0x7 + - u8 + - dot.file_type + - File type of this entry, 0x2 (directory) (if the feature flag is set). + * - 0x8 + - char + - dot.name[4] + - “.\0\0\0” + * - 0xC + - __le32 + - dotdot.inode + - inode number of parent directory. + * - 0x10 + - __le16 + - dotdot.rec_len + - block_size - 12. The record length is long enough to cover all htree + data. + * - 0x12 + - u8 + - dotdot.name_len + - Length of the name, 2. + * - 0x13 + - u8 + - dotdot.file_type + - File type of this entry, 0x2 (directory) (if the feature flag is set). + * - 0x14 + - char + - dotdot_name[4] + - “..\0\0” + * - 0x18 + - __le32 + - struct dx_root_info.reserved_zero + - Zero. + * - 0x1C + - u8 + - struct dx_root_info.hash_version + - Hash type, see dirhash_ table below. + * - 0x1D + - u8 + - struct dx_root_info.info_length + - Length of the tree information, 0x8. + * - 0x1E + - u8 + - struct dx_root_info.indirect_levels + - Depth of the htree. Cannot be larger than 3 if the INCOMPAT_LARGEDIR + feature is set; cannot be larger than 2 otherwise. + * - 0x1F + - u8 + - struct dx_root_info.unused_flags + - + * - 0x20 + - __le16 + - limit + - Maximum number of dx_entries that can follow this header, plus 1 for + the header itself. + * - 0x22 + - __le16 + - count + - Actual number of dx_entries that follow this header, plus 1 for the + header itself. + * - 0x24 + - __le32 + - block + - The block number (within the directory file) that goes with hash=0. + * - 0x28 + - struct dx_entry + - entries[0] + - As many 8-byte ``struct dx_entry`` as fits in the rest of the data block. + +.. _dirhash: + +The directory hash is one of the following values: + +.. list-table:: + :widths: 16 64 + :header-rows: 1 + + * - Value + - Description + * - 0x0 + - Legacy. + * - 0x1 + - Half MD4. + * - 0x2 + - Tea. + * - 0x3 + - Legacy, unsigned. + * - 0x4 + - Half MD4, unsigned. + * - 0x5 + - Tea, unsigned. + * - 0x6 + - Siphash. + +Interior nodes of an htree are recorded as ``struct dx_node``, which is +also the full length of a data block: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Type + - Name + - Description + * - 0x0 + - __le32 + - fake.inode + - Zero, to make it look like this entry is not in use. + * - 0x4 + - __le16 + - fake.rec_len + - The size of the block, in order to hide all of the dx_node data. + * - 0x6 + - u8 + - name_len + - Zero. There is no name for this “unused” directory entry. + * - 0x7 + - u8 + - file_type + - Zero. There is no file type for this “unused” directory entry. + * - 0x8 + - __le16 + - limit + - Maximum number of dx_entries that can follow this header, plus 1 for + the header itself. + * - 0xA + - __le16 + - count + - Actual number of dx_entries that follow this header, plus 1 for the + header itself. + * - 0xE + - __le32 + - block + - The block number (within the directory file) that goes with the lowest + hash value of this block. This value is stored in the parent block. + * - 0x12 + - struct dx_entry + - entries[0] + - As many 8-byte ``struct dx_entry`` as fits in the rest of the data block. + +The hash maps that exist in both ``struct dx_root`` and +``struct dx_node`` are recorded as ``struct dx_entry``, which is 8 bytes +long: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Type + - Name + - Description + * - 0x0 + - __le32 + - hash + - Hash code. + * - 0x4 + - __le32 + - block + - Block number (within the directory file, not filesystem blocks) of the + next node in the htree. + +(If you think this is all quite clever and peculiar, so does the +author.) + +If metadata checksums are enabled, the last 8 bytes of the directory +block (precisely the length of one dx_entry) are used to store a +``struct dx_tail``, which contains the checksum. The ``limit`` and +``count`` entries in the dx_root/dx_node structures are adjusted as +necessary to fit the dx_tail into the block. If there is no space for +the dx_tail, the user is notified to run e2fsck -D to rebuild the +directory index (which will ensure that there's space for the checksum. +The dx_tail structure is 8 bytes long and looks like this: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Type + - Name + - Description + * - 0x0 + - u32 + - dt_reserved + - Zero. + * - 0x4 + - __le32 + - dt_checksum + - Checksum of the htree directory block. + +The checksum is calculated against the FS UUID, the htree index header +(dx_root or dx_node), all of the htree indices (dx_entry) that are in +use, and the tail block (dx_tail). -- cgit v1.2.3