From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- Documentation/filesystems/qnx6.rst | 196 +++++++++++++++++++++++++++++++++++++ 1 file changed, 196 insertions(+) create mode 100644 Documentation/filesystems/qnx6.rst (limited to 'Documentation/filesystems/qnx6.rst') diff --git a/Documentation/filesystems/qnx6.rst b/Documentation/filesystems/qnx6.rst new file mode 100644 index 000000000..523b798f0 --- /dev/null +++ b/Documentation/filesystems/qnx6.rst @@ -0,0 +1,196 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================== +The QNX6 Filesystem +=================== + +The qnx6fs is used by newer QNX operating system versions. (e.g. Neutrino) +It got introduced in QNX 6.4.0 and is used default since 6.4.1. + +Option +====== + +mmi_fs Mount filesystem as used for example by Audi MMI 3G system + +Specification +============= + +qnx6fs shares many properties with traditional Unix filesystems. It has the +concepts of blocks, inodes and directories. + +On QNX it is possible to create little endian and big endian qnx6 filesystems. +This feature makes it possible to create and use a different endianness fs +for the target (QNX is used on quite a range of embedded systems) platform +running on a different endianness. + +The Linux driver handles endianness transparently. (LE and BE) + +Blocks +------ + +The space in the device or file is split up into blocks. These are a fixed +size of 512, 1024, 2048 or 4096, which is decided when the filesystem is +created. + +Blockpointers are 32bit, so the maximum space that can be addressed is +2^32 * 4096 bytes or 16TB + +The superblocks +--------------- + +The superblock contains all global information about the filesystem. +Each qnx6fs got two superblocks, each one having a 64bit serial number. +That serial number is used to identify the "active" superblock. +In write mode with reach new snapshot (after each synchronous write), the +serial of the new master superblock is increased (old superblock serial + 1) + +So basically the snapshot functionality is realized by an atomic final +update of the serial number. Before updating that serial, all modifications +are done by copying all modified blocks during that specific write request +(or period) and building up a new (stable) filesystem structure under the +inactive superblock. + +Each superblock holds a set of root inodes for the different filesystem +parts. (Inode, Bitmap and Longfilenames) +Each of these root nodes holds information like total size of the stored +data and the addressing levels in that specific tree. +If the level value is 0, up to 16 direct blocks can be addressed by each +node. + +Level 1 adds an additional indirect addressing level where each indirect +addressing block holds up to blocksize / 4 bytes pointers to data blocks. +Level 2 adds an additional indirect addressing block level (so, already up +to 16 * 256 * 256 = 1048576 blocks that can be addressed by such a tree). + +Unused block pointers are always set to ~0 - regardless of root node, +indirect addressing blocks or inodes. + +Data leaves are always on the lowest level. So no data is stored on upper +tree levels. + +The first Superblock is located at 0x2000. (0x2000 is the bootblock size) +The Audi MMI 3G first superblock directly starts at byte 0. + +Second superblock position can either be calculated from the superblock +information (total number of filesystem blocks) or by taking the highest +device address, zeroing the last 3 bytes and then subtracting 0x1000 from +that address. + +0x1000 is the size reserved for each superblock - regardless of the +blocksize of the filesystem. + +Inodes +------ + +Each object in the filesystem is represented by an inode. (index node) +The inode structure contains pointers to the filesystem blocks which contain +the data held in the object and all of the metadata about an object except +its longname. (filenames longer than 27 characters) +The metadata about an object includes the permissions, owner, group, flags, +size, number of blocks used, access time, change time and modification time. + +Object mode field is POSIX format. (which makes things easier) + +There are also pointers to the first 16 blocks, if the object data can be +addressed with 16 direct blocks. + +For more than 16 blocks an indirect addressing in form of another tree is +used. (scheme is the same as the one used for the superblock root nodes) + +The filesize is stored 64bit. Inode counting starts with 1. (while long +filename inodes start with 0) + +Directories +----------- + +A directory is a filesystem object and has an inode just like a file. +It is a specially formatted file containing records which associate each +name with an inode number. + +'.' inode number points to the directory inode + +'..' inode number points to the parent directory inode + +Eeach filename record additionally got a filename length field. + +One special case are long filenames or subdirectory names. + +These got set a filename length field of 0xff in the corresponding directory +record plus the longfile inode number also stored in that record. + +With that longfilename inode number, the longfilename tree can be walked +starting with the superblock longfilename root node pointers. + +Special files +------------- + +Symbolic links are also filesystem objects with inodes. They got a specific +bit in the inode mode field identifying them as symbolic link. + +The directory entry file inode pointer points to the target file inode. + +Hard links got an inode, a directory entry, but a specific mode bit set, +no block pointers and the directory file record pointing to the target file +inode. + +Character and block special devices do not exist in QNX as those files +are handled by the QNX kernel/drivers and created in /dev independent of the +underlaying filesystem. + +Long filenames +-------------- + +Long filenames are stored in a separate addressing tree. The staring point +is the longfilename root node in the active superblock. + +Each data block (tree leaves) holds one long filename. That filename is +limited to 510 bytes. The first two starting bytes are used as length field +for the actual filename. + +If that structure shall fit for all allowed blocksizes, it is clear why there +is a limit of 510 bytes for the actual filename stored. + +Bitmap +------ + +The qnx6fs filesystem allocation bitmap is stored in a tree under bitmap +root node in the superblock and each bit in the bitmap represents one +filesystem block. + +The first block is block 0, which starts 0x1000 after superblock start. +So for a normal qnx6fs 0x3000 (bootblock + superblock) is the physical +address at which block 0 is located. + +Bits at the end of the last bitmap block are set to 1, if the device is +smaller than addressing space in the bitmap. + +Bitmap system area +------------------ + +The bitmap itself is divided into three parts. + +First the system area, that is split into two halves. + +Then userspace. + +The requirement for a static, fixed preallocated system area comes from how +qnx6fs deals with writes. + +Each superblock got its own half of the system area. So superblock #1 +always uses blocks from the lower half while superblock #2 just writes to +blocks represented by the upper half bitmap system area bits. + +Bitmap blocks, Inode blocks and indirect addressing blocks for those two +tree structures are treated as system blocks. + +The rational behind that is that a write request can work on a new snapshot +(system area of the inactive - resp. lower serial numbered superblock) while +at the same time there is still a complete stable filesystem structure in the +other half of the system area. + +When finished with writing (a sync write is completed, the maximum sync leap +time or a filesystem sync is requested), serial of the previously inactive +superblock atomically is increased and the fs switches over to that - then +stable declared - superblock. + +For all data outside the system area, blocks are just copied while writing. -- cgit v1.2.3