From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- Documentation/mm/page_migration.rst | 195 ++++++++++++++++++++++++++++++++++++ 1 file changed, 195 insertions(+) create mode 100644 Documentation/mm/page_migration.rst (limited to 'Documentation/mm/page_migration.rst') diff --git a/Documentation/mm/page_migration.rst b/Documentation/mm/page_migration.rst new file mode 100644 index 000000000..11493bad7 --- /dev/null +++ b/Documentation/mm/page_migration.rst @@ -0,0 +1,195 @@ +.. _page_migration: + +============== +Page migration +============== + +Page migration allows moving the physical location of pages between +nodes in a NUMA system while the process is running. This means that the +virtual addresses that the process sees do not change. However, the +system rearranges the physical location of those pages. + +Also see :ref:`Heterogeneous Memory Management (HMM) ` +for migrating pages to or from device private memory. + +The main intent of page migration is to reduce the latency of memory accesses +by moving pages near to the processor where the process accessing that memory +is running. + +Page migration allows a process to manually relocate the node on which its +pages are located through the MF_MOVE and MF_MOVE_ALL options while setting +a new memory policy via mbind(). The pages of a process can also be relocated +from another process using the sys_migrate_pages() function call. The +migrate_pages() function call takes two sets of nodes and moves pages of a +process that are located on the from nodes to the destination nodes. +Page migration functions are provided by the numactl package by Andi Kleen +(a version later than 0.9.3 is required. Get it from +https://github.com/numactl/numactl.git). numactl provides libnuma +which provides an interface similar to other NUMA functionality for page +migration. cat ``/proc//numa_maps`` allows an easy review of where the +pages of a process are located. See also the numa_maps documentation in the +proc(5) man page. + +Manual migration is useful if for example the scheduler has relocated +a process to a processor on a distant node. A batch scheduler or an +administrator may detect the situation and move the pages of the process +nearer to the new processor. The kernel itself only provides +manual page migration support. Automatic page migration may be implemented +through user space processes that move pages. A special function call +"move_pages" allows the moving of individual pages within a process. +For example, A NUMA profiler may obtain a log showing frequent off-node +accesses and may use the result to move pages to more advantageous +locations. + +Larger installations usually partition the system using cpusets into +sections of nodes. Paul Jackson has equipped cpusets with the ability to +move pages when a task is moved to another cpuset (See +:ref:`CPUSETS `). +Cpusets allow the automation of process locality. If a task is moved to +a new cpuset then also all its pages are moved with it so that the +performance of the process does not sink dramatically. Also the pages +of processes in a cpuset are moved if the allowed memory nodes of a +cpuset are changed. + +Page migration allows the preservation of the relative location of pages +within a group of nodes for all migration techniques which will preserve a +particular memory allocation pattern generated even after migrating a +process. This is necessary in order to preserve the memory latencies. +Processes will run with similar performance after migration. + +Page migration occurs in several steps. First a high level +description for those trying to use migrate_pages() from the kernel +(for userspace usage see the Andi Kleen's numactl package mentioned above) +and then a low level description of how the low level details work. + +In kernel use of migrate_pages() +================================ + +1. Remove pages from the LRU. + + Lists of pages to be migrated are generated by scanning over + pages and moving them into lists. This is done by + calling isolate_lru_page(). + Calling isolate_lru_page() increases the references to the page + so that it cannot vanish while the page migration occurs. + It also prevents the swapper or other scans from encountering + the page. + +2. We need to have a function of type new_page_t that can be + passed to migrate_pages(). This function should figure out + how to allocate the correct new page given the old page. + +3. The migrate_pages() function is called which attempts + to do the migration. It will call the function to allocate + the new page for each page that is considered for + moving. + +How migrate_pages() works +========================= + +migrate_pages() does several passes over its list of pages. A page is moved +if all references to a page are removable at the time. The page has +already been removed from the LRU via isolate_lru_page() and the refcount +is increased so that the page cannot be freed while page migration occurs. + +Steps: + +1. Lock the page to be migrated. + +2. Ensure that writeback is complete. + +3. Lock the new page that we want to move to. It is locked so that accesses to + this (not yet up-to-date) page immediately block while the move is in progress. + +4. All the page table references to the page are converted to migration + entries. This decreases the mapcount of a page. If the resulting + mapcount is not zero then we do not migrate the page. All user space + processes that attempt to access the page will now wait on the page lock + or wait for the migration page table entry to be removed. + +5. The i_pages lock is taken. This will cause all processes trying + to access the page via the mapping to block on the spinlock. + +6. The refcount of the page is examined and we back out if references remain. + Otherwise, we know that we are the only one referencing this page. + +7. The radix tree is checked and if it does not contain the pointer to this + page then we back out because someone else modified the radix tree. + +8. The new page is prepped with some settings from the old page so that + accesses to the new page will discover a page with the correct settings. + +9. The radix tree is changed to point to the new page. + +10. The reference count of the old page is dropped because the address space + reference is gone. A reference to the new page is established because + the new page is referenced by the address space. + +11. The i_pages lock is dropped. With that lookups in the mapping + become possible again. Processes will move from spinning on the lock + to sleeping on the locked new page. + +12. The page contents are copied to the new page. + +13. The remaining page flags are copied to the new page. + +14. The old page flags are cleared to indicate that the page does + not provide any information anymore. + +15. Queued up writeback on the new page is triggered. + +16. If migration entries were inserted into the page table, then replace them + with real ptes. Doing so will enable access for user space processes not + already waiting for the page lock. + +17. The page locks are dropped from the old and new page. + Processes waiting on the page lock will redo their page faults + and will reach the new page. + +18. The new page is moved to the LRU and can be scanned by the swapper, + etc. again. + +Non-LRU page migration +====================== + +Although migration originally aimed for reducing the latency of memory +accesses for NUMA, compaction also uses migration to create high-order +pages. For compaction purposes, it is also useful to be able to move +non-LRU pages, such as zsmalloc and virtio-balloon pages. + +If a driver wants to make its pages movable, it should define a struct +movable_operations. It then needs to call __SetPageMovable() on each +page that it may be able to move. This uses the ``page->mapping`` field, +so this field is not available for the driver to use for other purposes. + +Monitoring Migration +===================== + +The following events (counters) can be used to monitor page migration. + +1. PGMIGRATE_SUCCESS: Normal page migration success. Each count means that a + page was migrated. If the page was a non-THP and non-hugetlb page, then + this counter is increased by one. If the page was a THP or hugetlb, then + this counter is increased by the number of THP or hugetlb subpages. + For example, migration of a single 2MB THP that has 4KB-size base pages + (subpages) will cause this counter to increase by 512. + +2. PGMIGRATE_FAIL: Normal page migration failure. Same counting rules as for + PGMIGRATE_SUCCESS, above: this will be increased by the number of subpages, + if it was a THP or hugetlb. + +3. THP_MIGRATION_SUCCESS: A THP was migrated without being split. + +4. THP_MIGRATION_FAIL: A THP could not be migrated nor it could be split. + +5. THP_MIGRATION_SPLIT: A THP was migrated, but not as such: first, the THP had + to be split. After splitting, a migration retry was used for it's sub-pages. + +THP_MIGRATION_* events also update the appropriate PGMIGRATE_SUCCESS or +PGMIGRATE_FAIL events. For example, a THP migration failure will cause both +THP_MIGRATION_FAIL and PGMIGRATE_FAIL to increase. + +Christoph Lameter, May 8, 2006. +Minchan Kim, Mar 28, 2016. + +.. kernel-doc:: include/linux/migrate.h -- cgit v1.2.3