From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- Documentation/networking/gtp.rst | 251 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 251 insertions(+) create mode 100644 Documentation/networking/gtp.rst (limited to 'Documentation/networking/gtp.rst') diff --git a/Documentation/networking/gtp.rst b/Documentation/networking/gtp.rst new file mode 100644 index 000000000..9a7835cc1 --- /dev/null +++ b/Documentation/networking/gtp.rst @@ -0,0 +1,251 @@ +.. SPDX-License-Identifier: GPL-2.0 + +===================================== +The Linux kernel GTP tunneling module +===================================== + +Documentation by + Harald Welte and + Andreas Schultz + +In 'drivers/net/gtp.c' you are finding a kernel-level implementation +of a GTP tunnel endpoint. + +What is GTP +=========== + +GTP is the Generic Tunnel Protocol, which is a 3GPP protocol used for +tunneling User-IP payload between a mobile station (phone, modem) +and the interconnection between an external packet data network (such +as the internet). + +So when you start a 'data connection' from your mobile phone, the +phone will use the control plane to signal for the establishment of +such a tunnel between that external data network and the phone. The +tunnel endpoints thus reside on the phone and in the gateway. All +intermediate nodes just transport the encapsulated packet. + +The phone itself does not implement GTP but uses some other +technology-dependent protocol stack for transmitting the user IP +payload, such as LLC/SNDCP/RLC/MAC. + +At some network element inside the cellular operator infrastructure +(SGSN in case of GPRS/EGPRS or classic UMTS, hNodeB in case of a 3G +femtocell, eNodeB in case of 4G/LTE), the cellular protocol stacking +is translated into GTP *without breaking the end-to-end tunnel*. So +intermediate nodes just perform some specific relay function. + +At some point the GTP packet ends up on the so-called GGSN (GSM/UMTS) +or P-GW (LTE), which terminates the tunnel, decapsulates the packet +and forwards it onto an external packet data network. This can be +public internet, but can also be any private IP network (or even +theoretically some non-IP network like X.25). + +You can find the protocol specification in 3GPP TS 29.060, available +publicly via the 3GPP website at http://www.3gpp.org/DynaReport/29060.htm + +A direct PDF link to v13.6.0 is provided for convenience below: +http://www.etsi.org/deliver/etsi_ts/129000_129099/129060/13.06.00_60/ts_129060v130600p.pdf + +The Linux GTP tunnelling module +=============================== + +The module implements the function of a tunnel endpoint, i.e. it is +able to decapsulate tunneled IP packets in the uplink originated by +the phone, and encapsulate raw IP packets received from the external +packet network in downlink towards the phone. + +It *only* implements the so-called 'user plane', carrying the User-IP +payload, called GTP-U. It does not implement the 'control plane', +which is a signaling protocol used for establishment and teardown of +GTP tunnels (GTP-C). + +So in order to have a working GGSN/P-GW setup, you will need a +userspace program that implements the GTP-C protocol and which then +uses the netlink interface provided by the GTP-U module in the kernel +to configure the kernel module. + +This split architecture follows the tunneling modules of other +protocols, e.g. PPPoE or L2TP, where you also run a userspace daemon +to handle the tunnel establishment, authentication etc. and only the +data plane is accelerated inside the kernel. + +Don't be confused by terminology: The GTP User Plane goes through +kernel accelerated path, while the GTP Control Plane goes to +Userspace :) + +The official homepage of the module is at +https://osmocom.org/projects/linux-kernel-gtp-u/wiki + +Userspace Programs with Linux Kernel GTP-U support +================================================== + +At the time of this writing, there are at least two Free Software +implementations that implement GTP-C and can use the netlink interface +to make use of the Linux kernel GTP-U support: + +* OpenGGSN (classic 2G/3G GGSN in C): + https://osmocom.org/projects/openggsn/wiki/OpenGGSN + +* ergw (GGSN + P-GW in Erlang): + https://github.com/travelping/ergw + +Userspace Library / Command Line Utilities +========================================== + +There is a userspace library called 'libgtpnl' which is based on +libmnl and which implements a C-language API towards the netlink +interface provided by the Kernel GTP module: + +http://git.osmocom.org/libgtpnl/ + +Protocol Versions +================= + +There are two different versions of GTP-U: v0 [GSM TS 09.60] and v1 +[3GPP TS 29.281]. Both are implemented in the Kernel GTP module. +Version 0 is a legacy version, and deprecated from recent 3GPP +specifications. + +GTP-U uses UDP for transporting PDUs. The receiving UDP port is 2151 +for GTPv1-U and 3386 for GTPv0-U. + +There are three versions of GTP-C: v0, v1, and v2. As the kernel +doesn't implement GTP-C, we don't have to worry about this. It's the +responsibility of the control plane implementation in userspace to +implement that. + +IPv6 +==== + +The 3GPP specifications indicate either IPv4 or IPv6 can be used both +on the inner (user) IP layer, or on the outer (transport) layer. + +Unfortunately, the Kernel module currently supports IPv6 neither for +the User IP payload, nor for the outer IP layer. Patches or other +Contributions to fix this are most welcome! + +Mailing List +============ + +If you have questions regarding how to use the Kernel GTP module from +your own software, or want to contribute to the code, please use the +osmocom-net-grps mailing list for related discussion. The list can be +reached at osmocom-net-gprs@lists.osmocom.org and the mailman +interface for managing your subscription is at +https://lists.osmocom.org/mailman/listinfo/osmocom-net-gprs + +Issue Tracker +============= + +The Osmocom project maintains an issue tracker for the Kernel GTP-U +module at +https://osmocom.org/projects/linux-kernel-gtp-u/issues + +History / Acknowledgements +========================== + +The Module was originally created in 2012 by Harald Welte, but never +completed. Pablo came in to finish the mess Harald left behind. But +doe to a lack of user interest, it never got merged. + +In 2015, Andreas Schultz came to the rescue and fixed lots more bugs, +extended it with new features and finally pushed all of us to get it +mainline, where it was merged in 4.7.0. + +Architectural Details +===================== + +Local GTP-U entity and tunnel identification +-------------------------------------------- + +GTP-U uses UDP for transporting PDU's. The receiving UDP port is 2152 +for GTPv1-U and 3386 for GTPv0-U. + +There is only one GTP-U entity (and therefore SGSN/GGSN/S-GW/PDN-GW +instance) per IP address. Tunnel Endpoint Identifier (TEID) are unique +per GTP-U entity. + +A specific tunnel is only defined by the destination entity. Since the +destination port is constant, only the destination IP and TEID define +a tunnel. The source IP and Port have no meaning for the tunnel. + +Therefore: + + * when sending, the remote entity is defined by the remote IP and + the tunnel endpoint id. The source IP and port have no meaning and + can be changed at any time. + + * when receiving the local entity is defined by the local + destination IP and the tunnel endpoint id. The source IP and port + have no meaning and can change at any time. + +[3GPP TS 29.281] Section 4.3.0 defines this so:: + + The TEID in the GTP-U header is used to de-multiplex traffic + incoming from remote tunnel endpoints so that it is delivered to the + User plane entities in a way that allows multiplexing of different + users, different packet protocols and different QoS levels. + Therefore no two remote GTP-U endpoints shall send traffic to a + GTP-U protocol entity using the same TEID value except + for data forwarding as part of mobility procedures. + +The definition above only defines that two remote GTP-U endpoints +*should not* send to the same TEID, it *does not* forbid or exclude +such a scenario. In fact, the mentioned mobility procedures make it +necessary that the GTP-U entity accepts traffic for TEIDs from +multiple or unknown peers. + +Therefore, the receiving side identifies tunnels exclusively based on +TEIDs, not based on the source IP! + +APN vs. Network Device +====================== + +The GTP-U driver creates a Linux network device for each Gi/SGi +interface. + +[3GPP TS 29.281] calls the Gi/SGi reference point an interface. This +may lead to the impression that the GGSN/P-GW can have only one such +interface. + +Correct is that the Gi/SGi reference point defines the interworking +between +the 3GPP packet domain (PDN) based on GTP-U tunnel and IP +based networks. + +There is no provision in any of the 3GPP documents that limits the +number of Gi/SGi interfaces implemented by a GGSN/P-GW. + +[3GPP TS 29.061] Section 11.3 makes it clear that the selection of a +specific Gi/SGi interfaces is made through the Access Point Name +(APN):: + + 2. each private network manages its own addressing. In general this + will result in different private networks having overlapping + address ranges. A logically separate connection (e.g. an IP in IP + tunnel or layer 2 virtual circuit) is used between the GGSN/P-GW + and each private network. + + In this case the IP address alone is not necessarily unique. The + pair of values, Access Point Name (APN) and IPv4 address and/or + IPv6 prefixes, is unique. + +In order to support the overlapping address range use case, each APN +is mapped to a separate Gi/SGi interface (network device). + +.. note:: + + The Access Point Name is purely a control plane (GTP-C) concept. + At the GTP-U level, only Tunnel Endpoint Identifiers are present in + GTP-U packets and network devices are known + +Therefore for a given UE the mapping in IP to PDN network is: + + * network device + MS IP -> Peer IP + Peer TEID, + +and from PDN to IP network: + + * local GTP-U IP + TEID -> network device + +Furthermore, before a received T-PDU is injected into the network +device the MS IP is checked against the IP recorded in PDP context. -- cgit v1.2.3