From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- Documentation/networking/netdevices.rst | 299 ++++++++++++++++++++++++++++++++ 1 file changed, 299 insertions(+) create mode 100644 Documentation/networking/netdevices.rst (limited to 'Documentation/networking/netdevices.rst') diff --git a/Documentation/networking/netdevices.rst b/Documentation/networking/netdevices.rst new file mode 100644 index 000000000..9e4cccb90 --- /dev/null +++ b/Documentation/networking/netdevices.rst @@ -0,0 +1,299 @@ +.. SPDX-License-Identifier: GPL-2.0 + +===================================== +Network Devices, the Kernel, and You! +===================================== + + +Introduction +============ +The following is a random collection of documentation regarding +network devices. + +struct net_device lifetime rules +================================ +Network device structures need to persist even after module is unloaded and +must be allocated with alloc_netdev_mqs() and friends. +If device has registered successfully, it will be freed on last use +by free_netdev(). This is required to handle the pathological case cleanly +(example: ``rmmod mydriver needs_free_netdev = true; + } + + static void my_destructor(struct net_device *dev) + { + some_obj_destroy(priv->obj); + some_uninit(priv); + } + + int create_link() + { + struct my_device_priv *priv; + int err; + + ASSERT_RTNL(); + + dev = alloc_netdev(sizeof(*priv), "net%d", NET_NAME_UNKNOWN, my_setup); + if (!dev) + return -ENOMEM; + priv = netdev_priv(dev); + + /* Implicit constructor */ + err = some_init(priv); + if (err) + goto err_free_dev; + + priv->obj = some_obj_create(); + if (!priv->obj) { + err = -ENOMEM; + goto err_some_uninit; + } + /* End of constructor, set the destructor: */ + dev->priv_destructor = my_destructor; + + err = register_netdevice(dev); + if (err) + /* register_netdevice() calls destructor on failure */ + goto err_free_dev; + + /* If anything fails now unregister_netdevice() (or unregister_netdev()) + * will take care of calling my_destructor and free_netdev(). + */ + + return 0; + + err_some_uninit: + some_uninit(priv); + err_free_dev: + free_netdev(dev); + return err; + } + +If struct net_device.priv_destructor is set it will be called by the core +some time after unregister_netdevice(), it will also be called if +register_netdevice() fails. The callback may be invoked with or without +``rtnl_lock`` held. + +There is no explicit constructor callback, driver "constructs" the private +netdev state after allocating it and before registration. + +Setting struct net_device.needs_free_netdev makes core call free_netdevice() +automatically after unregister_netdevice() when all references to the device +are gone. It only takes effect after a successful call to register_netdevice() +so if register_netdevice() fails driver is responsible for calling +free_netdev(). + +free_netdev() is safe to call on error paths right after unregister_netdevice() +or when register_netdevice() fails. Parts of netdev (de)registration process +happen after ``rtnl_lock`` is released, therefore in those cases free_netdev() +will defer some of the processing until ``rtnl_lock`` is released. + +Devices spawned from struct rtnl_link_ops should never free the +struct net_device directly. + +.ndo_init and .ndo_uninit +~~~~~~~~~~~~~~~~~~~~~~~~~ + +``.ndo_init`` and ``.ndo_uninit`` callbacks are called during net_device +registration and de-registration, under ``rtnl_lock``. Drivers can use +those e.g. when parts of their init process need to run under ``rtnl_lock``. + +``.ndo_init`` runs before device is visible in the system, ``.ndo_uninit`` +runs during de-registering after device is closed but other subsystems +may still have outstanding references to the netdevice. + +MTU +=== +Each network device has a Maximum Transfer Unit. The MTU does not +include any link layer protocol overhead. Upper layer protocols must +not pass a socket buffer (skb) to a device to transmit with more data +than the mtu. The MTU does not include link layer header overhead, so +for example on Ethernet if the standard MTU is 1500 bytes used, the +actual skb will contain up to 1514 bytes because of the Ethernet +header. Devices should allow for the 4 byte VLAN header as well. + +Segmentation Offload (GSO, TSO) is an exception to this rule. The +upper layer protocol may pass a large socket buffer to the device +transmit routine, and the device will break that up into separate +packets based on the current MTU. + +MTU is symmetrical and applies both to receive and transmit. A device +must be able to receive at least the maximum size packet allowed by +the MTU. A network device may use the MTU as mechanism to size receive +buffers, but the device should allow packets with VLAN header. With +standard Ethernet mtu of 1500 bytes, the device should allow up to +1518 byte packets (1500 + 14 header + 4 tag). The device may either: +drop, truncate, or pass up oversize packets, but dropping oversize +packets is preferred. + + +struct net_device synchronization rules +======================================= +ndo_open: + Synchronization: rtnl_lock() semaphore. + Context: process + +ndo_stop: + Synchronization: rtnl_lock() semaphore. + Context: process + Note: netif_running() is guaranteed false + +ndo_do_ioctl: + Synchronization: rtnl_lock() semaphore. + Context: process + + This is only called by network subsystems internally, + not by user space calling ioctl as it was in before + linux-5.14. + +ndo_siocbond: + Synchronization: rtnl_lock() semaphore. + Context: process + + Used by the bonding driver for the SIOCBOND family of + ioctl commands. + +ndo_siocwandev: + Synchronization: rtnl_lock() semaphore. + Context: process + + Used by the drivers/net/wan framework to handle + the SIOCWANDEV ioctl with the if_settings structure. + +ndo_siocdevprivate: + Synchronization: rtnl_lock() semaphore. + Context: process + + This is used to implement SIOCDEVPRIVATE ioctl helpers. + These should not be added to new drivers, so don't use. + +ndo_eth_ioctl: + Synchronization: rtnl_lock() semaphore. + Context: process + +ndo_get_stats: + Synchronization: rtnl_lock() semaphore, dev_base_lock rwlock, or RCU. + Context: atomic (can't sleep under rwlock or RCU) + +ndo_start_xmit: + Synchronization: __netif_tx_lock spinlock. + + When the driver sets NETIF_F_LLTX in dev->features this will be + called without holding netif_tx_lock. In this case the driver + has to lock by itself when needed. + The locking there should also properly protect against + set_rx_mode. WARNING: use of NETIF_F_LLTX is deprecated. + Don't use it for new drivers. + + Context: Process with BHs disabled or BH (timer), + will be called with interrupts disabled by netconsole. + + Return codes: + + * NETDEV_TX_OK everything ok. + * NETDEV_TX_BUSY Cannot transmit packet, try later + Usually a bug, means queue start/stop flow control is broken in + the driver. Note: the driver must NOT put the skb in its DMA ring. + +ndo_tx_timeout: + Synchronization: netif_tx_lock spinlock; all TX queues frozen. + Context: BHs disabled + Notes: netif_queue_stopped() is guaranteed true + +ndo_set_rx_mode: + Synchronization: netif_addr_lock spinlock. + Context: BHs disabled + +struct napi_struct synchronization rules +======================================== +napi->poll: + Synchronization: + NAPI_STATE_SCHED bit in napi->state. Device + driver's ndo_stop method will invoke napi_disable() on + all NAPI instances which will do a sleeping poll on the + NAPI_STATE_SCHED napi->state bit, waiting for all pending + NAPI activity to cease. + + Context: + softirq + will be called with interrupts disabled by netconsole. -- cgit v1.2.3