From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- Documentation/process/deprecated.rst | 348 +++++++++++++++++++++++++++++++++++ 1 file changed, 348 insertions(+) create mode 100644 Documentation/process/deprecated.rst (limited to 'Documentation/process/deprecated.rst') diff --git a/Documentation/process/deprecated.rst b/Documentation/process/deprecated.rst new file mode 100644 index 000000000..c8fd53a11 --- /dev/null +++ b/Documentation/process/deprecated.rst @@ -0,0 +1,348 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _deprecated: + +===================================================================== +Deprecated Interfaces, Language Features, Attributes, and Conventions +===================================================================== + +In a perfect world, it would be possible to convert all instances of +some deprecated API into the new API and entirely remove the old API in +a single development cycle. However, due to the size of the kernel, the +maintainership hierarchy, and timing, it's not always feasible to do these +kinds of conversions at once. This means that new instances may sneak into +the kernel while old ones are being removed, only making the amount of +work to remove the API grow. In order to educate developers about what +has been deprecated and why, this list has been created as a place to +point when uses of deprecated things are proposed for inclusion in the +kernel. + +__deprecated +------------ +While this attribute does visually mark an interface as deprecated, +it `does not produce warnings during builds any more +`_ +because one of the standing goals of the kernel is to build without +warnings and no one was actually doing anything to remove these deprecated +interfaces. While using `__deprecated` is nice to note an old API in +a header file, it isn't the full solution. Such interfaces must either +be fully removed from the kernel, or added to this file to discourage +others from using them in the future. + +BUG() and BUG_ON() +------------------ +Use WARN() and WARN_ON() instead, and handle the "impossible" +error condition as gracefully as possible. While the BUG()-family +of APIs were originally designed to act as an "impossible situation" +assert and to kill a kernel thread "safely", they turn out to just be +too risky. (e.g. "In what order do locks need to be released? Have +various states been restored?") Very commonly, using BUG() will +destabilize a system or entirely break it, which makes it impossible +to debug or even get viable crash reports. Linus has `very strong +`_ +feelings `about this +`_. + +Note that the WARN()-family should only be used for "expected to +be unreachable" situations. If you want to warn about "reachable +but undesirable" situations, please use the pr_warn()-family of +functions. System owners may have set the *panic_on_warn* sysctl, +to make sure their systems do not continue running in the face of +"unreachable" conditions. (For example, see commits like `this one +`_.) + +open-coded arithmetic in allocator arguments +-------------------------------------------- +Dynamic size calculations (especially multiplication) should not be +performed in memory allocator (or similar) function arguments due to the +risk of them overflowing. This could lead to values wrapping around and a +smaller allocation being made than the caller was expecting. Using those +allocations could lead to linear overflows of heap memory and other +misbehaviors. (One exception to this is literal values where the compiler +can warn if they might overflow. However, the preferred way in these +cases is to refactor the code as suggested below to avoid the open-coded +arithmetic.) + +For example, do not use ``count * size`` as an argument, as in:: + + foo = kmalloc(count * size, GFP_KERNEL); + +Instead, the 2-factor form of the allocator should be used:: + + foo = kmalloc_array(count, size, GFP_KERNEL); + +Specifically, kmalloc() can be replaced with kmalloc_array(), and +kzalloc() can be replaced with kcalloc(). + +If no 2-factor form is available, the saturate-on-overflow helpers should +be used:: + + bar = vmalloc(array_size(count, size)); + +Another common case to avoid is calculating the size of a structure with +a trailing array of others structures, as in:: + + header = kzalloc(sizeof(*header) + count * sizeof(*header->item), + GFP_KERNEL); + +Instead, use the helper:: + + header = kzalloc(struct_size(header, item, count), GFP_KERNEL); + +.. note:: If you are using struct_size() on a structure containing a zero-length + or a one-element array as a trailing array member, please refactor such + array usage and switch to a `flexible array member + <#zero-length-and-one-element-arrays>`_ instead. + +For other calculations, please compose the use of the size_mul(), +size_add(), and size_sub() helpers. For example, in the case of:: + + foo = krealloc(current_size + chunk_size * (count - 3), GFP_KERNEL); + +Instead, use the helpers:: + + foo = krealloc(size_add(current_size, + size_mul(chunk_size, + size_sub(count, 3))), GFP_KERNEL); + +For more details, also see array3_size() and flex_array_size(), +as well as the related check_mul_overflow(), check_add_overflow(), +check_sub_overflow(), and check_shl_overflow() family of functions. + +simple_strtol(), simple_strtoll(), simple_strtoul(), simple_strtoull() +---------------------------------------------------------------------- +The simple_strtol(), simple_strtoll(), +simple_strtoul(), and simple_strtoull() functions +explicitly ignore overflows, which may lead to unexpected results +in callers. The respective kstrtol(), kstrtoll(), +kstrtoul(), and kstrtoull() functions tend to be the +correct replacements, though note that those require the string to be +NUL or newline terminated. + +strcpy() +-------- +strcpy() performs no bounds checking on the destination buffer. This +could result in linear overflows beyond the end of the buffer, leading to +all kinds of misbehaviors. While `CONFIG_FORTIFY_SOURCE=y` and various +compiler flags help reduce the risk of using this function, there is +no good reason to add new uses of this function. The safe replacement +is strscpy(), though care must be given to any cases where the return +value of strcpy() was used, since strscpy() does not return a pointer to +the destination, but rather a count of non-NUL bytes copied (or negative +errno when it truncates). + +strncpy() on NUL-terminated strings +----------------------------------- +Use of strncpy() does not guarantee that the destination buffer will +be NUL terminated. This can lead to various linear read overflows and +other misbehavior due to the missing termination. It also NUL-pads +the destination buffer if the source contents are shorter than the +destination buffer size, which may be a needless performance penalty +for callers using only NUL-terminated strings. + +When the destination is required to be NUL-terminated, the replacement is +strscpy(), though care must be given to any cases where the return value +of strncpy() was used, since strscpy() does not return a pointer to the +destination, but rather a count of non-NUL bytes copied (or negative +errno when it truncates). Any cases still needing NUL-padding should +instead use strscpy_pad(). + +If a caller is using non-NUL-terminated strings, strtomem() should be +used, and the destinations should be marked with the `__nonstring +`_ +attribute to avoid future compiler warnings. For cases still needing +NUL-padding, strtomem_pad() can be used. + +strlcpy() +--------- +strlcpy() reads the entire source buffer first (since the return value +is meant to match that of strlen()). This read may exceed the destination +size limit. This is both inefficient and can lead to linear read overflows +if a source string is not NUL-terminated. The safe replacement is strscpy(), +though care must be given to any cases where the return value of strlcpy() +is used, since strscpy() will return negative errno values when it truncates. + +%p format specifier +------------------- +Traditionally, using "%p" in format strings would lead to regular address +exposure flaws in dmesg, proc, sysfs, etc. Instead of leaving these to +be exploitable, all "%p" uses in the kernel are being printed as a hashed +value, rendering them unusable for addressing. New uses of "%p" should not +be added to the kernel. For text addresses, using "%pS" is likely better, +as it produces the more useful symbol name instead. For nearly everything +else, just do not add "%p" at all. + +Paraphrasing Linus's current `guidance `_: + +- If the hashed "%p" value is pointless, ask yourself whether the pointer + itself is important. Maybe it should be removed entirely? +- If you really think the true pointer value is important, why is some + system state or user privilege level considered "special"? If you think + you can justify it (in comments and commit log) well enough to stand + up to Linus's scrutiny, maybe you can use "%px", along with making sure + you have sensible permissions. + +If you are debugging something where "%p" hashing is causing problems, +you can temporarily boot with the debug flag "`no_hash_pointers +`_". + +Variable Length Arrays (VLAs) +----------------------------- +Using stack VLAs produces much worse machine code than statically +sized stack arrays. While these non-trivial `performance issues +`_ are reason enough to +eliminate VLAs, they are also a security risk. Dynamic growth of a stack +array may exceed the remaining memory in the stack segment. This could +lead to a crash, possible overwriting sensitive contents at the end of the +stack (when built without `CONFIG_THREAD_INFO_IN_TASK=y`), or overwriting +memory adjacent to the stack (when built without `CONFIG_VMAP_STACK=y`) + +Implicit switch case fall-through +--------------------------------- +The C language allows switch cases to fall through to the next case +when a "break" statement is missing at the end of a case. This, however, +introduces ambiguity in the code, as it's not always clear if the missing +break is intentional or a bug. For example, it's not obvious just from +looking at the code if `STATE_ONE` is intentionally designed to fall +through into `STATE_TWO`:: + + switch (value) { + case STATE_ONE: + do_something(); + case STATE_TWO: + do_other(); + break; + default: + WARN("unknown state"); + } + +As there have been a long list of flaws `due to missing "break" statements +`_, we no longer allow +implicit fall-through. In order to identify intentional fall-through +cases, we have adopted a pseudo-keyword macro "fallthrough" which +expands to gcc's extension `__attribute__((__fallthrough__)) +`_. +(When the C17/C18 `[[fallthrough]]` syntax is more commonly supported by +C compilers, static analyzers, and IDEs, we can switch to using that syntax +for the macro pseudo-keyword.) + +All switch/case blocks must end in one of: + +* break; +* fallthrough; +* continue; +* goto