From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- Documentation/security/IMA-templates.rst | 111 +++++++++++++++++++++++++++++++ 1 file changed, 111 insertions(+) create mode 100644 Documentation/security/IMA-templates.rst (limited to 'Documentation/security/IMA-templates.rst') diff --git a/Documentation/security/IMA-templates.rst b/Documentation/security/IMA-templates.rst new file mode 100644 index 000000000..15b4add31 --- /dev/null +++ b/Documentation/security/IMA-templates.rst @@ -0,0 +1,111 @@ +================================= +IMA Template Management Mechanism +================================= + + +Introduction +============ + +The original ``ima`` template is fixed length, containing the filedata hash +and pathname. The filedata hash is limited to 20 bytes (md5/sha1). +The pathname is a null terminated string, limited to 255 characters. +To overcome these limitations and to add additional file metadata, it is +necessary to extend the current version of IMA by defining additional +templates. For example, information that could be possibly reported are +the inode UID/GID or the LSM labels either of the inode and of the process +that is accessing it. + +However, the main problem to introduce this feature is that, each time +a new template is defined, the functions that generate and display +the measurements list would include the code for handling a new format +and, thus, would significantly grow over the time. + +The proposed solution solves this problem by separating the template +management from the remaining IMA code. The core of this solution is the +definition of two new data structures: a template descriptor, to determine +which information should be included in the measurement list; a template +field, to generate and display data of a given type. + +Managing templates with these structures is very simple. To support +a new data type, developers define the field identifier and implement +two functions, init() and show(), respectively to generate and display +measurement entries. Defining a new template descriptor requires +specifying the template format (a string of field identifiers separated +by the ``|`` character) through the ``ima_template_fmt`` kernel command line +parameter. At boot time, IMA initializes the chosen template descriptor +by translating the format into an array of template fields structures taken +from the set of the supported ones. + +After the initialization step, IMA will call ``ima_alloc_init_template()`` +(new function defined within the patches for the new template management +mechanism) to generate a new measurement entry by using the template +descriptor chosen through the kernel configuration or through the newly +introduced ``ima_template`` and ``ima_template_fmt`` kernel command line parameters. +It is during this phase that the advantages of the new architecture are +clearly shown: the latter function will not contain specific code to handle +a given template but, instead, it simply calls the ``init()`` method of the template +fields associated to the chosen template descriptor and store the result +(pointer to allocated data and data length) in the measurement entry structure. + +The same mechanism is employed to display measurements entries. +The functions ``ima[_ascii]_measurements_show()`` retrieve, for each entry, +the template descriptor used to produce that entry and call the show() +method for each item of the array of template fields structures. + + + +Supported Template Fields and Descriptors +========================================= + +In the following, there is the list of supported template fields +``('': description)``, that can be used to define new template +descriptors by adding their identifier to the format string +(support for more data types will be added later): + + - 'd': the digest of the event (i.e. the digest of a measured file), + calculated with the SHA1 or MD5 hash algorithm; + - 'n': the name of the event (i.e. the file name), with size up to 255 bytes; + - 'd-ng': the digest of the event, calculated with an arbitrary hash + algorithm (field format: :digest); + - 'd-ngv2': same as d-ng, but prefixed with the "ima" or "verity" digest type + (field format: ::digest); + - 'd-modsig': the digest of the event without the appended modsig; + - 'n-ng': the name of the event, without size limitations; + - 'sig': the file signature, based on either the file's/fsverity's digest[1], + or the EVM portable signature, if 'security.ima' contains a file hash. + - 'modsig' the appended file signature; + - 'buf': the buffer data that was used to generate the hash without size limitations; + - 'evmsig': the EVM portable signature; + - 'iuid': the inode UID; + - 'igid': the inode GID; + - 'imode': the inode mode; + - 'xattrnames': a list of xattr names (separated by ``|``), only if the xattr is + present; + - 'xattrlengths': a list of xattr lengths (u32), only if the xattr is present; + - 'xattrvalues': a list of xattr values; + + +Below, there is the list of defined template descriptors: + + - "ima": its format is ``d|n``; + - "ima-ng" (default): its format is ``d-ng|n-ng``; + - "ima-ngv2": its format is ``d-ngv2|n-ng``; + - "ima-sig": its format is ``d-ng|n-ng|sig``; + - "ima-sigv2": its format is ``d-ngv2|n-ng|sig``; + - "ima-buf": its format is ``d-ng|n-ng|buf``; + - "ima-modsig": its format is ``d-ng|n-ng|sig|d-modsig|modsig``; + - "evm-sig": its format is ``d-ng|n-ng|evmsig|xattrnames|xattrlengths|xattrvalues|iuid|igid|imode``; + + +Use +=== + +To specify the template descriptor to be used to generate measurement entries, +currently the following methods are supported: + + - select a template descriptor among those supported in the kernel + configuration (``ima-ng`` is the default choice); + - specify a template descriptor name from the kernel command line through + the ``ima_template=`` parameter; + - register a new template descriptor with custom format through the kernel + command line parameter ``ima_template_fmt=``. -- cgit v1.2.3