From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- Documentation/sphinx/kernel_feat.py | 166 ++++++++++++++++++++++++++++++++++++ 1 file changed, 166 insertions(+) create mode 100644 Documentation/sphinx/kernel_feat.py (limited to 'Documentation/sphinx/kernel_feat.py') diff --git a/Documentation/sphinx/kernel_feat.py b/Documentation/sphinx/kernel_feat.py new file mode 100644 index 000000000..27b701ed3 --- /dev/null +++ b/Documentation/sphinx/kernel_feat.py @@ -0,0 +1,166 @@ +# coding=utf-8 +# SPDX-License-Identifier: GPL-2.0 +# +u""" + kernel-feat + ~~~~~~~~~~~ + + Implementation of the ``kernel-feat`` reST-directive. + + :copyright: Copyright (C) 2016 Markus Heiser + :copyright: Copyright (C) 2016-2019 Mauro Carvalho Chehab + :maintained-by: Mauro Carvalho Chehab + :license: GPL Version 2, June 1991 see Linux/COPYING for details. + + The ``kernel-feat`` (:py:class:`KernelFeat`) directive calls the + scripts/get_feat.pl script to parse the Kernel ABI files. + + Overview of directive's argument and options. + + .. code-block:: rst + + .. kernel-feat:: + :debug: + + The argument ```` is required. It contains the + location of the ABI files to be parsed. + + ``debug`` + Inserts a code-block with the *raw* reST. Sometimes it is helpful to see + what reST is generated. + +""" + +import codecs +import os +import re +import subprocess +import sys + +from os import path + +from docutils import nodes, statemachine +from docutils.statemachine import ViewList +from docutils.parsers.rst import directives, Directive +from docutils.utils.error_reporting import ErrorString +from sphinx.util.docutils import switch_source_input + +__version__ = '1.0' + +def setup(app): + + app.add_directive("kernel-feat", KernelFeat) + return dict( + version = __version__ + , parallel_read_safe = True + , parallel_write_safe = True + ) + +class KernelFeat(Directive): + + u"""KernelFeat (``kernel-feat``) directive""" + + required_arguments = 1 + optional_arguments = 2 + has_content = False + final_argument_whitespace = True + + option_spec = { + "debug" : directives.flag + } + + def warn(self, message, **replace): + replace["fname"] = self.state.document.current_source + replace["line_no"] = replace.get("line_no", self.lineno) + message = ("%(fname)s:%(line_no)s: [kernel-feat WARN] : " + message) % replace + self.state.document.settings.env.app.warn(message, prefix="") + + def run(self): + + doc = self.state.document + if not doc.settings.file_insertion_enabled: + raise self.warning("docutils: file insertion disabled") + + env = doc.settings.env + cwd = path.dirname(doc.current_source) + cmd = "get_feat.pl rest --enable-fname --dir " + cmd += self.arguments[0] + + if len(self.arguments) > 1: + cmd += " --arch " + self.arguments[1] + + srctree = path.abspath(os.environ["srctree"]) + + fname = cmd + + # extend PATH with $(srctree)/scripts + path_env = os.pathsep.join([ + srctree + os.sep + "scripts", + os.environ["PATH"] + ]) + shell_env = os.environ.copy() + shell_env["PATH"] = path_env + shell_env["srctree"] = srctree + + lines = self.runCmd(cmd, shell=True, cwd=cwd, env=shell_env) + + line_regex = re.compile("^\.\. FILE (\S+)$") + + out_lines = "" + + for line in lines.split("\n"): + match = line_regex.search(line) + if match: + fname = match.group(1) + + # Add the file to Sphinx build dependencies + env.note_dependency(os.path.abspath(fname)) + else: + out_lines += line + "\n" + + nodeList = self.nestedParse(out_lines, fname) + return nodeList + + def runCmd(self, cmd, **kwargs): + u"""Run command ``cmd`` and return its stdout as unicode.""" + + try: + proc = subprocess.Popen( + cmd + , stdout = subprocess.PIPE + , stderr = subprocess.PIPE + , **kwargs + ) + out, err = proc.communicate() + + out, err = codecs.decode(out, 'utf-8'), codecs.decode(err, 'utf-8') + + if proc.returncode != 0: + raise self.severe( + u"command '%s' failed with return code %d" + % (cmd, proc.returncode) + ) + except OSError as exc: + raise self.severe(u"problems with '%s' directive: %s." + % (self.name, ErrorString(exc))) + return out + + def nestedParse(self, lines, fname): + content = ViewList() + node = nodes.section() + + if "debug" in self.options: + code_block = "\n\n.. code-block:: rst\n :linenos:\n" + for l in lines.split("\n"): + code_block += "\n " + l + lines = code_block + "\n\n" + + for c, l in enumerate(lines.split("\n")): + content.append(l, fname, c) + + buf = self.state.memo.title_styles, self.state.memo.section_level, self.state.memo.reporter + + with switch_source_input(self.state, content): + self.state.nested_parse(content, 0, node, match_titles=1) + + return node.children -- cgit v1.2.3