From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- Documentation/staging/tee.rst | 311 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 311 insertions(+) create mode 100644 Documentation/staging/tee.rst (limited to 'Documentation/staging/tee.rst') diff --git a/Documentation/staging/tee.rst b/Documentation/staging/tee.rst new file mode 100644 index 000000000..498343c7a --- /dev/null +++ b/Documentation/staging/tee.rst @@ -0,0 +1,311 @@ +============= +TEE subsystem +============= + +This document describes the TEE subsystem in Linux. + +A TEE (Trusted Execution Environment) is a trusted OS running in some +secure environment, for example, TrustZone on ARM CPUs, or a separate +secure co-processor etc. A TEE driver handles the details needed to +communicate with the TEE. + +This subsystem deals with: + +- Registration of TEE drivers + +- Managing shared memory between Linux and the TEE + +- Providing a generic API to the TEE + +The TEE interface +================= + +include/uapi/linux/tee.h defines the generic interface to a TEE. + +User space (the client) connects to the driver by opening /dev/tee[0-9]* or +/dev/teepriv[0-9]*. + +- TEE_IOC_SHM_ALLOC allocates shared memory and returns a file descriptor + which user space can mmap. When user space doesn't need the file + descriptor any more, it should be closed. When shared memory isn't needed + any longer it should be unmapped with munmap() to allow the reuse of + memory. + +- TEE_IOC_VERSION lets user space know which TEE this driver handles and + its capabilities. + +- TEE_IOC_OPEN_SESSION opens a new session to a Trusted Application. + +- TEE_IOC_INVOKE invokes a function in a Trusted Application. + +- TEE_IOC_CANCEL may cancel an ongoing TEE_IOC_OPEN_SESSION or TEE_IOC_INVOKE. + +- TEE_IOC_CLOSE_SESSION closes a session to a Trusted Application. + +There are two classes of clients, normal clients and supplicants. The latter is +a helper process for the TEE to access resources in Linux, for example file +system access. A normal client opens /dev/tee[0-9]* and a supplicant opens +/dev/teepriv[0-9]. + +Much of the communication between clients and the TEE is opaque to the +driver. The main job for the driver is to receive requests from the +clients, forward them to the TEE and send back the results. In the case of +supplicants the communication goes in the other direction, the TEE sends +requests to the supplicant which then sends back the result. + +The TEE kernel interface +======================== + +Kernel provides a TEE bus infrastructure where a Trusted Application is +represented as a device identified via Universally Unique Identifier (UUID) and +client drivers register a table of supported device UUIDs. + +TEE bus infrastructure registers following APIs: + +match(): + iterates over the client driver UUID table to find a corresponding + match for device UUID. If a match is found, then this particular device is + probed via corresponding probe API registered by the client driver. This + process happens whenever a device or a client driver is registered with TEE + bus. + +uevent(): + notifies user-space (udev) whenever a new device is registered on + TEE bus for auto-loading of modularized client drivers. + +TEE bus device enumeration is specific to underlying TEE implementation, so it +is left open for TEE drivers to provide corresponding implementation. + +Then TEE client driver can talk to a matched Trusted Application using APIs +listed in include/linux/tee_drv.h. + +TEE client driver example +------------------------- + +Suppose a TEE client driver needs to communicate with a Trusted Application +having UUID: ``ac6a4085-0e82-4c33-bf98-8eb8e118b6c2``, so driver registration +snippet would look like:: + + static const struct tee_client_device_id client_id_table[] = { + {UUID_INIT(0xac6a4085, 0x0e82, 0x4c33, + 0xbf, 0x98, 0x8e, 0xb8, 0xe1, 0x18, 0xb6, 0xc2)}, + {} + }; + + MODULE_DEVICE_TABLE(tee, client_id_table); + + static struct tee_client_driver client_driver = { + .id_table = client_id_table, + .driver = { + .name = DRIVER_NAME, + .bus = &tee_bus_type, + .probe = client_probe, + .remove = client_remove, + }, + }; + + static int __init client_init(void) + { + return driver_register(&client_driver.driver); + } + + static void __exit client_exit(void) + { + driver_unregister(&client_driver.driver); + } + + module_init(client_init); + module_exit(client_exit); + +OP-TEE driver +============= + +The OP-TEE driver handles OP-TEE [1] based TEEs. Currently it is only the ARM +TrustZone based OP-TEE solution that is supported. + +Lowest level of communication with OP-TEE builds on ARM SMC Calling +Convention (SMCCC) [2], which is the foundation for OP-TEE's SMC interface +[3] used internally by the driver. Stacked on top of that is OP-TEE Message +Protocol [4]. + +OP-TEE SMC interface provides the basic functions required by SMCCC and some +additional functions specific for OP-TEE. The most interesting functions are: + +- OPTEE_SMC_FUNCID_CALLS_UID (part of SMCCC) returns the version information + which is then returned by TEE_IOC_VERSION + +- OPTEE_SMC_CALL_GET_OS_UUID returns the particular OP-TEE implementation, used + to tell, for instance, a TrustZone OP-TEE apart from an OP-TEE running on a + separate secure co-processor. + +- OPTEE_SMC_CALL_WITH_ARG drives the OP-TEE message protocol + +- OPTEE_SMC_GET_SHM_CONFIG lets the driver and OP-TEE agree on which memory + range to used for shared memory between Linux and OP-TEE. + +The GlobalPlatform TEE Client API [5] is implemented on top of the generic +TEE API. + +Picture of the relationship between the different components in the +OP-TEE architecture:: + + User space Kernel Secure world + ~~~~~~~~~~ ~~~~~~ ~~~~~~~~~~~~ + +--------+ +-------------+ + | Client | | Trusted | + +--------+ | Application | + /\ +-------------+ + || +----------+ /\ + || |tee- | || + || |supplicant| \/ + || +----------+ +-------------+ + \/ /\ | TEE Internal| + +-------+ || | API | + + TEE | || +--------+--------+ +-------------+ + | Client| || | TEE | OP-TEE | | OP-TEE | + | API | \/ | subsys | driver | | Trusted OS | + +-------+----------------+----+-------+----+-----------+-------------+ + | Generic TEE API | | OP-TEE MSG | + | IOCTL (TEE_IOC_*) | | SMCCC (OPTEE_SMC_CALL_*) | + +-----------------------------+ +------------------------------+ + +RPC (Remote Procedure Call) are requests from secure world to kernel driver +or tee-supplicant. An RPC is identified by a special range of SMCCC return +values from OPTEE_SMC_CALL_WITH_ARG. RPC messages which are intended for the +kernel are handled by the kernel driver. Other RPC messages will be forwarded to +tee-supplicant without further involvement of the driver, except switching +shared memory buffer representation. + +OP-TEE device enumeration +------------------------- + +OP-TEE provides a pseudo Trusted Application: drivers/tee/optee/device.c in +order to support device enumeration. In other words, OP-TEE driver invokes this +application to retrieve a list of Trusted Applications which can be registered +as devices on the TEE bus. + +OP-TEE notifications +-------------------- + +There are two kinds of notifications that secure world can use to make +normal world aware of some event. + +1. Synchronous notifications delivered with ``OPTEE_RPC_CMD_NOTIFICATION`` + using the ``OPTEE_RPC_NOTIFICATION_SEND`` parameter. +2. Asynchronous notifications delivered with a combination of a non-secure + edge-triggered interrupt and a fast call from the non-secure interrupt + handler. + +Synchronous notifications are limited by depending on RPC for delivery, +this is only usable when secure world is entered with a yielding call via +``OPTEE_SMC_CALL_WITH_ARG``. This excludes such notifications from secure +world interrupt handlers. + +An asynchronous notification is delivered via a non-secure edge-triggered +interrupt to an interrupt handler registered in the OP-TEE driver. The +actual notification value are retrieved with the fast call +``OPTEE_SMC_GET_ASYNC_NOTIF_VALUE``. Note that one interrupt can represent +multiple notifications. + +One notification value ``OPTEE_SMC_ASYNC_NOTIF_VALUE_DO_BOTTOM_HALF`` has a +special meaning. When this value is received it means that normal world is +supposed to make a yielding call ``OPTEE_MSG_CMD_DO_BOTTOM_HALF``. This +call is done from the thread assisting the interrupt handler. This is a +building block for OP-TEE OS in secure world to implement the top half and +bottom half style of device drivers. + +AMD-TEE driver +============== + +The AMD-TEE driver handles the communication with AMD's TEE environment. The +TEE environment is provided by AMD Secure Processor. + +The AMD Secure Processor (formerly called Platform Security Processor or PSP) +is a dedicated processor that features ARM TrustZone technology, along with a +software-based Trusted Execution Environment (TEE) designed to enable +third-party Trusted Applications. This feature is currently enabled only for +APUs. + +The following picture shows a high level overview of AMD-TEE:: + + | + x86 | + | + User space (Kernel space) | AMD Secure Processor (PSP) + ~~~~~~~~~~ ~~~~~~~~~~~~~~ | ~~~~~~~~~~~~~~~~~~~~~~~~~~ + | + +--------+ | +-------------+ + | Client | | | Trusted | + +--------+ | | Application | + /\ | +-------------+ + || | /\ + || | || + || | \/ + || | +----------+ + || | | TEE | + || | | Internal | + \/ | | API | + +---------+ +-----------+---------+ +----------+ + | TEE | | TEE | AMD-TEE | | AMD-TEE | + | Client | | subsystem | driver | | Trusted | + | API | | | | | OS | + +---------+-----------+----+------+---------+---------+----------+ + | Generic TEE API | | ASP | Mailbox | + | IOCTL (TEE_IOC_*) | | driver | Register Protocol | + +--------------------------+ +---------+--------------------+ + +At the lowest level (in x86), the AMD Secure Processor (ASP) driver uses the +CPU to PSP mailbox register to submit commands to the PSP. The format of the +command buffer is opaque to the ASP driver. It's role is to submit commands to +the secure processor and return results to AMD-TEE driver. The interface +between AMD-TEE driver and AMD Secure Processor driver can be found in [6]. + +The AMD-TEE driver packages the command buffer payload for processing in TEE. +The command buffer format for the different TEE commands can be found in [7]. + +The TEE commands supported by AMD-TEE Trusted OS are: + +* TEE_CMD_ID_LOAD_TA - loads a Trusted Application (TA) binary into + TEE environment. +* TEE_CMD_ID_UNLOAD_TA - unloads TA binary from TEE environment. +* TEE_CMD_ID_OPEN_SESSION - opens a session with a loaded TA. +* TEE_CMD_ID_CLOSE_SESSION - closes session with loaded TA +* TEE_CMD_ID_INVOKE_CMD - invokes a command with loaded TA +* TEE_CMD_ID_MAP_SHARED_MEM - maps shared memory +* TEE_CMD_ID_UNMAP_SHARED_MEM - unmaps shared memory + +AMD-TEE Trusted OS is the firmware running on AMD Secure Processor. + +The AMD-TEE driver registers itself with TEE subsystem and implements the +following driver function callbacks: + +* get_version - returns the driver implementation id and capability. +* open - sets up the driver context data structure. +* release - frees up driver resources. +* open_session - loads the TA binary and opens session with loaded TA. +* close_session - closes session with loaded TA and unloads it. +* invoke_func - invokes a command with loaded TA. + +cancel_req driver callback is not supported by AMD-TEE. + +The GlobalPlatform TEE Client API [5] can be used by the user space (client) to +talk to AMD's TEE. AMD's TEE provides a secure environment for loading, opening +a session, invoking commands and closing session with TA. + +References +========== + +[1] https://github.com/OP-TEE/optee_os + +[2] http://infocenter.arm.com/help/topic/com.arm.doc.den0028a/index.html + +[3] drivers/tee/optee/optee_smc.h + +[4] drivers/tee/optee/optee_msg.h + +[5] http://www.globalplatform.org/specificationsdevice.asp look for + "TEE Client API Specification v1.0" and click download. + +[6] include/linux/psp-tee.h + +[7] drivers/tee/amdtee/amdtee_if.h -- cgit v1.2.3