From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../translations/it_IT/process/changes.rst | 517 +++++++++++++++++++++ 1 file changed, 517 insertions(+) create mode 100644 Documentation/translations/it_IT/process/changes.rst (limited to 'Documentation/translations/it_IT/process/changes.rst') diff --git a/Documentation/translations/it_IT/process/changes.rst b/Documentation/translations/it_IT/process/changes.rst new file mode 100644 index 000000000..10e0ef9c3 --- /dev/null +++ b/Documentation/translations/it_IT/process/changes.rst @@ -0,0 +1,517 @@ +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/changes.rst ` +:Translator: Federico Vaga + +.. _it_changes: + +Requisiti minimi per compilare il kernel +++++++++++++++++++++++++++++++++++++++++ + +Introduzione +============ + +Questo documento fornisce una lista dei software necessari per eseguire questa +versione del kernel. + +Questo documento è basato sul file "Changes" del kernel 2.0.x e quindi le +persone che lo scrissero meritano credito (Jared Mauch, Axel Boldt, +Alessandro Sigala, e tanti altri nella rete). + +Requisiti minimi correnti +************************* + +Prima di pensare d'avere trovato un baco, aggiornate i seguenti programmi +**almeno** alla versione indicata! Se non siete certi della versione che state +usando, il comando indicato dovrebbe dirvelo. + +Questa lista presume che abbiate già un kernel Linux funzionante. In aggiunta, +non tutti gli strumenti sono necessari ovunque; ovviamente, se non avete una +PC Card, per esempio, probabilmente non dovreste preoccuparvi di pcmciautils. + +====================== ================= ======================================== + Programma Versione minima Comando per verificare la versione +====================== ================= ======================================== +GNU C 5.1 gcc --version +Clang/LLVM (optional) 11.0.0 clang --version +GNU make 3.81 make --version +binutils 2.23 ld -v +flex 2.5.35 flex --version +bison 2.0 bison --version +pahole 1.16 pahole --version +util-linux 2.10o fdformat --version +kmod 13 depmod -V +e2fsprogs 1.41.4 e2fsck -V +jfsutils 1.1.3 fsck.jfs -V +reiserfsprogs 3.6.3 reiserfsck -V +xfsprogs 2.6.0 xfs_db -V +squashfs-tools 4.0 mksquashfs -version +btrfs-progs 0.18 btrfsck +pcmciautils 004 pccardctl -V +quota-tools 3.09 quota -V +PPP 2.4.0 pppd --version +nfs-utils 1.0.5 showmount --version +procps 3.2.0 ps --version +udev 081 udevd --version +grub 0.93 grub --version || grub-install --version +mcelog 0.6 mcelog --version +iptables 1.4.2 iptables -V +openssl & libcrypto 1.0.0 openssl version +bc 1.06.95 bc --version +Sphinx\ [#f1]_ 1.7 sphinx-build --version +cpio any cpio --version +====================== ================= ======================================== + +.. [#f1] Sphinx è necessario solo per produrre la documentazione del Kernel + +Compilazione del kernel +*********************** + +GCC +--- + +La versione necessaria di gcc potrebbe variare a seconda del tipo di CPU nel +vostro calcolatore. + +Clang/LLVM (opzionale) +---------------------- + +L'ultima versione di clang e *LLVM utils* (secondo `releases.llvm.org +`_) sono supportati per la generazione del +kernel. Non garantiamo che anche i rilasci più vecchi funzionino, inoltre +potremmo rimuovere gli espedienti che abbiamo implementato per farli +funzionare. Per maggiori informazioni +:ref:`Building Linux with Clang/LLVM `. + +Make +---- + +Per compilare il kernel vi servirà GNU make 3.81 o successivo. + +Binutils +-------- + +Per generare il kernel è necessario avere Binutils 2.23 o superiore. + +pkg-config +---------- + +Il sistema di compilazione, dalla versione 4.18, richiede pkg-config per +verificare l'esistenza degli strumenti kconfig e per determinare le +impostazioni da usare in 'make {g,x}config'. Precedentemente pkg-config +veniva usato ma non verificato o documentato. + +Flex +---- + +Dalla versione 4.16, il sistema di compilazione, durante l'esecuzione, genera +un analizzatore lessicale. Questo richiede flex 2.5.35 o successivo. + +Bison +----- + +Dalla versione 4.16, il sistema di compilazione, durante l'esecuzione, genera +un parsificatore. Questo richiede bison 2.0 o successivo. + +pahole +------ + +Dalla versione 5.2, quando viene impostato CONFIG_DEBUG_INFO_BTF, il sistema di +compilazione genera BTF (BPF Type Format) a partire da DWARF per vmlinux. Più +tardi anche per i moduli. Questo richiede pahole v1.16 o successivo. + +A seconda della distribuzione, lo si può trovare nei pacchetti 'dwarves' o +'pahole'. Oppure lo si può trovare qui: https://fedorapeople.org/~acme/dwarves/. + +Perl +---- + +Per compilare il kernel vi servirà perl 5 e i seguenti moduli ``Getopt::Long``, +``Getopt::Std``, ``File::Basename``, e ``File::Find``. + +BC +-- + +Vi servirà bc per compilare i kernel dal 3.10 in poi. + +OpenSSL +------- + +Il programma OpenSSL e la libreria crypto vengono usati per la firma dei moduli +e la gestione dei certificati; sono usati per la creazione della chiave e +la generazione della firma. + +Se la firma dei moduli è abilitata, allora vi servirà openssl per compilare il +kernel 3.7 e successivi. Vi serviranno anche i pacchetti di sviluppo di +openssl per compilare il kernel 4.3 o successivi. + + +Strumenti di sistema +******************** + +Modifiche architetturali +------------------------ + +DevFS è stato reso obsoleto da udev +(http://www.kernel.org/pub/linux/utils/kernel/hotplug/) + +Il supporto per UID a 32-bit è ora disponibile. Divertitevi! + +La documentazione delle funzioni in Linux è una fase di transizione +verso una documentazione integrata nei sorgenti stessi usando dei commenti +formattati in modo speciale e posizionati vicino alle funzioni che descrivono. +Al fine di arricchire la documentazione, questi commenti possono essere +combinati con i file ReST presenti in Documentation/; questi potranno +poi essere convertiti in formato PostScript, HTML, LaTex, ePUB o PDF. +Per convertire i documenti da ReST al formato che volete, avete bisogno di +Sphinx. + +Util-linux +---------- + +Le versioni più recenti di util-linux: forniscono il supporto a ``fdisk`` per +dischi di grandi dimensioni; supportano le nuove opzioni di mount; riconoscono +più tipi di partizioni; hanno un fdformat che funziona con i kernel 2.4; +e altre chicche. Probabilmente vorrete aggiornarlo. + +Ksymoops +-------- + +Se l'impensabile succede e il kernel va in oops, potrebbe servirvi lo strumento +ksymoops per decodificarlo, ma nella maggior parte dei casi non vi servirà. +Generalmente è preferibile compilare il kernel con l'opzione ``CONFIG_KALLSYMS`` +cosicché venga prodotto un output più leggibile che può essere usato così com'è +(produce anche un output migliore di ksymoops). Se per qualche motivo il +vostro kernel non è stato compilato con ``CONFIG_KALLSYMS`` e non avete modo di +ricompilarlo e riprodurre l'oops con quell'opzione abilitata, allora potete +usare ksymoops per decodificare l'oops. + +Mkinitrd +-------- + +I cambiamenti della struttura in ``/lib/modules`` necessita l'aggiornamento di +mkinitrd. + +E2fsprogs +--------- + +L'ultima versione di ``e2fsprogs`` corregge diversi bachi in fsck e debugfs. +Ovviamente, aggiornarlo è una buona idea. + +JFSutils +-------- + +Il pacchetto ``jfsutils`` contiene programmi per il file-system JFS. +Sono disponibili i seguenti strumenti: + +- ``fsck.jfs`` - avvia la ripetizione del log delle transizioni, e verifica e + ripara una partizione formattata secondo JFS + +- ``mkfs.jfs`` - crea una partizione formattata secondo JFS + +- sono disponibili altri strumenti per il file-system. + +Reiserfsprogs +------------- + +Il pacchetto reiserfsprogs dovrebbe essere usato con reiserfs-3.6.x (Linux +kernel 2.4.x). Questo è un pacchetto combinato che contiene versioni +funzionanti di ``mkreiserfs``, ``resize_reiserfs``, ``debugreiserfs`` e +``reiserfsck``. Questi programmi funzionano sulle piattaforme i386 e alpha. + +Xfsprogs +-------- + +L'ultima versione di ``xfsprogs`` contiene, fra i tanti, i programmi +``mkfs.xfs``, ``xfs_db`` e ``xfs_repair`` per il file-system XFS. +Dipendono dell'architettura e qualsiasi versione dalla 2.0.0 in poi +dovrebbe funzionare correttamente con la versione corrente del codice +XFS nel kernel (sono raccomandate le versioni 2.6.0 o successive per via +di importanti miglioramenti). + +PCMCIAutils +----------- + +PCMCIAutils sostituisce ``pcmica-cs``. Serve ad impostare correttamente i +connettori PCMCIA all'avvio del sistema e a caricare i moduli necessari per +i dispositivi a 16-bit se il kernel è stato modularizzato e il sottosistema +hotplug è in uso. + +Quota-tools +----------- + +Il supporto per uid e gid a 32 bit richiedono l'uso della versione 2 del +formato quota. La versione 3.07 e successive di quota-tools supportano +questo formato. Usate la versione raccomandata nella lista qui sopra o una +successiva. + +Micro codice per Intel IA32 +--------------------------- + +Per poter aggiornare il micro codice per Intel IA32, è stato aggiunto un +apposito driver; il driver è accessibile come un normale dispositivo a +caratteri (misc). Se non state usando udev probabilmente sarà necessario +eseguire i seguenti comandi come root prima di poterlo aggiornare:: + + mkdir /dev/cpu + mknod /dev/cpu/microcode c 10 184 + chmod 0644 /dev/cpu/microcode + +Probabilmente, vorrete anche il programma microcode_ctl da usare con questo +dispositivo. + +udev +---- + +``udev`` è un programma in spazio utente il cui scopo è quello di popolare +dinamicamente la cartella ``/dev`` coi dispositivi effettivamente presenti. +``udev`` sostituisce le funzionalità base di devfs, consentendo comunque +nomi persistenti per i dispositivi. + +FUSE +---- + +Serve libfuse 2.4.0 o successiva. Il requisito minimo assoluto è 2.3.0 ma +le opzioni di mount ``direct_io`` e ``kernel_cache`` non funzioneranno. + + +Rete +**** + +Cambiamenti generali +-------------------- + +Se per quanto riguarda la configurazione di rete avete esigenze di un certo +livello dovreste prendere in considerazione l'uso degli strumenti in ip-route2. + +Filtro dei pacchetti / NAT +-------------------------- + +Il codice per filtraggio dei pacchetti e il NAT fanno uso degli stessi +strumenti come nelle versioni del kernel antecedenti la 2.4.x (iptables). +Include ancora moduli di compatibilità per 2.2.x ipchains e 2.0.x ipdwadm. + +PPP +--- + +Il driver per PPP è stato ristrutturato per supportare collegamenti multipli e +per funzionare su diversi livelli. Se usate PPP, aggiornate pppd almeno alla +versione 2.4.0. + +Se non usate udev, dovete avere un file /dev/ppp che può essere creato da root +col seguente comando:: + + mknod /dev/ppp c 108 0 + + +NFS-utils +--------- + +Nei kernel più antichi (2.4 e precedenti), il server NFS doveva essere +informato sui clienti ai quali si voleva fornire accesso via NFS. Questa +informazione veniva passata al kernel quando un cliente montava un file-system +mediante ``mountd``, oppure usando ``exportfs`` all'avvio del sistema. +exportfs prende le informazioni circa i clienti attivi da ``/var/lib/nfs/rmtab``. + +Questo approccio è piuttosto delicato perché dipende dalla correttezza di +rmtab, che non è facile da garantire, in particolare quando si cerca di +implementare un *failover*. Anche quando il sistema funziona bene, ``rmtab`` +ha il problema di accumulare vecchie voci inutilizzate. + +Sui kernel più recenti il kernel ha la possibilità di informare mountd quando +arriva una richiesta da una macchina sconosciuta, e mountd può dare al kernel +le informazioni corrette per l'esportazione. Questo rimuove la dipendenza con +``rmtab`` e significa che il kernel deve essere al corrente solo dei clienti +attivi. + +Per attivare questa funzionalità, dovete eseguire il seguente comando prima di +usare exportfs o mountd:: + + mount -t nfsd nfsd /proc/fs/nfsd + +Dove possibile, raccomandiamo di proteggere tutti i servizi NFS dall'accesso +via internet mediante un firewall. + +mcelog +------ + +Quando ``CONFIG_x86_MCE`` è attivo, il programma mcelog processa e registra +gli eventi *machine check*. Gli eventi *machine check* sono errori riportati +dalla CPU. Incoraggiamo l'analisi di questi errori. + + +Documentazione del kernel +************************* + +Sphinx +------ + +Per i dettaglio sui requisiti di Sphinx, fate riferimento a :ref:`it_sphinx_install` +in :ref:`Documentation/translations/it_IT/doc-guide/sphinx.rst ` + +Ottenere software aggiornato +============================ + +Compilazione del kernel +*********************** + +gcc +--- + +- + +Clang/LLVM +---------- + +- :ref:`Getting LLVM `. + +Make +---- + +- + +Binutils +-------- + +- + +Flex +---- + +- + +Bison +----- + +- + +OpenSSL +------- + +- + +Strumenti di sistema +******************** + +Util-linux +---------- + +- + +Kmod +---- + +- +- + +Ksymoops +-------- + +- + +Mkinitrd +-------- + +- + +E2fsprogs +--------- + +- +- + +JFSutils +-------- + +- + +Reiserfsprogs +------------- + +- + +Xfsprogs +-------- + +- +- + +Pcmciautils +----------- + +- + +Quota-tools +----------- + +- + + +Microcodice Intel P6 +-------------------- + +- + +udev +---- + +- + +FUSE +---- + +- + +mcelog +------ + +- + +cpio +---- + +- + +Rete +**** + +PPP +--- + +- +- +- + + +NFS-utils +--------- + +- + +Iptables +-------- + +- + +Ip-route2 +--------- + +- + +OProfile +-------- + +- + +NFS-Utils +--------- + +- + +Documentazione del kernel +************************* + +Sphinx +------ + +- -- cgit v1.2.3