From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../translations/it_IT/process/deprecated.rst | 384 +++++++++++++++++++++ 1 file changed, 384 insertions(+) create mode 100644 Documentation/translations/it_IT/process/deprecated.rst (limited to 'Documentation/translations/it_IT/process/deprecated.rst') diff --git a/Documentation/translations/it_IT/process/deprecated.rst b/Documentation/translations/it_IT/process/deprecated.rst new file mode 100644 index 000000000..febf83897 --- /dev/null +++ b/Documentation/translations/it_IT/process/deprecated.rst @@ -0,0 +1,384 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. include:: ../disclaimer-ita.rst + +:Original: :ref:`Documentation/process/deprecated.rst ` +:Translator: Federico Vaga + +.. _it_deprecated: + +============================================================================== +Interfacce deprecate, caratteristiche del linguaggio, attributi, e convenzioni +============================================================================== + +In un mondo perfetto, sarebbe possibile prendere tutti gli usi di +un'interfaccia deprecata e convertirli in quella nuova, e così sarebbe +possibile rimuovere la vecchia interfaccia in un singolo ciclo di sviluppo. +Tuttavia, per via delle dimensioni del kernel, la gerarchia dei manutentori e +le tempistiche, non è sempre possibile fare questo tipo di conversione tutta +in una volta. Questo significa che nuove istanze di una vecchia interfaccia +potrebbero aggiungersi al kernel proprio quando si sta cercando di rimuoverle, +aumentando così il carico di lavoro. Al fine di istruire gli sviluppatori su +cosa è considerato deprecato (e perché), è stata create la seguente lista a cui +fare riferimento quando qualcuno propone modifiche che usano cose deprecate. + +__deprecated +------------ +Nonostante questo attributo marchi visibilmente un interfaccia come deprecata, +`non produce più alcun avviso durante la compilazione +`_ +perché uno degli obiettivi del kernel è quello di compilare senza avvisi; +inoltre, nessuno stava agendo per rimuovere queste interfacce. Nonostante l'uso +di `__deprecated` in un file d'intestazione sia opportuno per segnare una +interfaccia come 'vecchia', questa non è una soluzione completa. L'interfaccia +deve essere rimossa dal kernel, o aggiunta a questo documento per scoraggiarne +l'uso. + +BUG() e BUG_ON() +---------------- +Al loro posto usate WARN() e WARN_ON() per gestire le +condizioni "impossibili" e gestitele come se fosse possibile farlo. +Nonostante le funzioni della famiglia BUG() siano state progettate +per asserire "situazioni impossibili" e interrompere in sicurezza un +thread del kernel, queste si sono rivelate essere troppo rischiose +(per esempio, in quale ordine rilasciare i *lock*? Ci sono stati che +sono stati ripristinati?). Molto spesso l'uso di BUG() +destabilizza il sistema o lo corrompe del tutto, il che rende +impossibile un'attività di debug o anche solo leggere un rapporto +circa l'errore. Linus ha un'opinione molto critica al riguardo: +`email 1 +`_, +`email 2 +`_ + +Tenete presente che la famiglia di funzioni WARN() dovrebbe essere +usato solo per situazioni che si suppone siano "impossibili". Se +volete avvisare gli utenti riguardo a qualcosa di possibile anche se +indesiderato, usare le funzioni della famiglia pr_warn(). Chi +amministra il sistema potrebbe aver attivato l'opzione sysctl +*panic_on_warn* per essere sicuri che il sistema smetta di funzionare +in caso si verifichino delle condizioni "inaspettate". (per esempio, +date un'occhiata al questo `commit +`_) + +Calcoli codificati negli argomenti di un allocatore +---------------------------------------------------- +Il calcolo dinamico delle dimensioni (specialmente le moltiplicazioni) non +dovrebbero essere fatto negli argomenti di funzioni di allocazione di memoria +(o simili) per via del rischio di overflow. Questo può portare a valori più +piccoli di quelli che il chiamante si aspettava. L'uso di questo modo di +allocare può portare ad un overflow della memoria di heap e altri +malfunzionamenti. (Si fa eccezione per valori numerici per i quali il +compilatore può generare avvisi circa un potenziale overflow. Tuttavia, anche in +questi casi è preferibile riscrivere il codice come suggerito di seguito). + +Per esempio, non usate ``count * size`` come argomento:: + + foo = kmalloc(count * size, GFP_KERNEL); + +Al suo posto, si dovrebbe usare l'allocatore a due argomenti:: + + foo = kmalloc_array(count, size, GFP_KERNEL); + +Nello specifico, kmalloc() può essere sostituta da kmalloc_array(), e kzalloc() +da kcalloc(). + +Se questo tipo di allocatore non è disponibile, allora dovrebbero essere usate +le funzioni del tipo *saturate-on-overflow*:: + + bar = vmalloc(array_size(count, size)); + +Un altro tipico caso da evitare è quello di calcolare la dimensione di una +struttura seguita da un vettore di altre strutture, come nel seguente caso:: + + header = kzalloc(sizeof(*header) + count * sizeof(*header->item), + GFP_KERNEL); + +Invece, usate la seguente funzione:: + + header = kzalloc(struct_size(header, item, count), GFP_KERNEL); + +.. note:: Se per caso state usando struct_size() su una struttura dati che + in coda contiene un array di lunghezza zero o uno, allora siete + invitati a riorganizzare il vostro codice usando il + `flexible array member <#zero-length-and-one-element-arrays>`_. + +Per altri calcoli, usate le funzioni size_mul(), size_add(), e size_sub(). Per +esempio, al posto di:: + + foo = krealloc(current_size + chunk_size * (count - 3), GFP_KERNEL); + +dovreste scrivere: + + foo = krealloc(size_add(current_size, + size_mul(chunk_size, + size_sub(count, 3))), GFP_KERNEL); + +Per maggiori dettagli fate riferimento a array3_size() e flex_array_size(), ma +anche le funzioni della famiglia check_mul_overflow(), check_add_overflow(), +check_sub_overflow(), e check_shl_overflow(). + +simple_strtol(), simple_strtoll(), simple_strtoul(), simple_strtoull() +---------------------------------------------------------------------- +Le funzioni simple_strtol(), simple_strtoll(), +simple_strtoul(), e simple_strtoull() ignorano volutamente +i possibili overflow, e questo può portare il chiamante a generare risultati +inaspettati. Le rispettive funzioni kstrtol(), kstrtoll(), +kstrtoul(), e kstrtoull() sono da considerarsi le corrette +sostitute; tuttavia va notato che queste richiedono che la stringa sia +terminata con il carattere NUL o quello di nuova riga. + +strcpy() +-------- +La funzione strcpy() non fa controlli agli estremi del buffer +di destinazione. Questo può portare ad un overflow oltre i limiti del +buffer e generare svariati tipi di malfunzionamenti. Nonostante l'opzione +`CONFIG_FORTIFY_SOURCE=y` e svariate opzioni del compilatore aiutano +a ridurne il rischio, non c'è alcuna buona ragione per continuare ad usare +questa funzione. La versione sicura da usare è strscpy(), tuttavia va +prestata attenzione a tutti quei casi dove viene usato il valore di +ritorno di strcpy(). La funzione strscpy() non ritorna un puntatore +alla destinazione, ma un contatore dei byte non NUL copiati (oppure +un errno negativo se la stringa è stata troncata). + +strncpy() su stringe terminate con NUL +-------------------------------------- +L'utilizzo di strncpy() non fornisce alcuna garanzia sul fatto che +il buffer di destinazione verrà terminato con il carattere NUL. Questo +potrebbe portare a diversi overflow di lettura o altri malfunzionamenti +causati, appunto, dalla mancanza del terminatore. Questa estende la +terminazione nel buffer di destinazione quando la stringa d'origine è più +corta; questo potrebbe portare ad una penalizzazione delle prestazioni per +chi usa solo stringe terminate. La versione sicura da usare è +strscpy(), tuttavia va prestata attenzione a tutti quei casi dove +viene usato il valore di ritorno di strncpy(). La funzione strscpy() +non ritorna un puntatore alla destinazione, ma un contatore dei byte +non NUL copiati (oppure un errno negativo se la stringa è stata +troncata). Tutti i casi che necessitano di estendere la +terminazione con NUL dovrebbero usare strscpy_pad(). + +Se il chiamate no usa stringhe terminate con NUL, allore strncpy() +può continuare ad essere usata, ma i buffer di destinazione devono essere +marchiati con l'attributo `__nonstring `_ +per evitare avvisi durante la compilazione. + +strlcpy() +--------- +La funzione strlcpy(), per prima cosa, legge interamente il buffer di +origine, magari leggendo più di quanto verrà effettivamente copiato. Questo +è inefficiente e può portare a overflow di lettura quando la stringa non è +terminata con NUL. La versione sicura da usare è strscpy(), tuttavia +va prestata attenzione a tutti quei casi dove viene usato il valore di +ritorno di strlcpy(), dato che strscpy() ritorna un valore di errno +negativo quanto la stringa viene troncata. + +Segnaposto %p nella stringa di formato +-------------------------------------- + +Tradizionalmente, l'uso del segnaposto "%p" nella stringa di formato +esponne un indirizzo di memoria in dmesg, proc, sysfs, eccetera. Per +evitare che questi indirizzi vengano sfruttati da malintenzionati, +tutto gli usi di "%p" nel kernel rappresentano l'hash dell'indirizzo, +rendendolo di fatto inutilizzabile. Nuovi usi di "%p" non dovrebbero +essere aggiunti al kernel. Per una rappresentazione testuale di un +indirizzo usate "%pS", l'output è migliore perché mostrerà il nome del +simbolo. Per tutto il resto, semplicemente non usate "%p". + +Parafrasando la `guida +`_ +di Linus: + +- Se il valore hash di "%p" è inutile, chiediti se il puntatore stesso + è importante. Forse dovrebbe essere rimosso del tutto? +- Se credi davvero che il vero valore del puntatore sia importante, + perché alcuni stati del sistema o i livelli di privilegi di un + utente sono considerati "special"? Se pensi di poterlo giustificare + (in un commento e nel messaggio del commit) abbastanza bene da + affrontare il giudizio di Linus, allora forse potrai usare "%px", + assicurandosi anche di averne il permesso. + +Potete disabilitare temporaneamente l'hashing di "%p" nel caso in cui questa +funzionalità vi sia d'ostacolo durante una sessione di debug. Per farlo +aggiungete l'opzione di debug "`no_hash_pointers +`_" alla +riga di comando del kernel. + +Vettori a dimensione variabile (VLA) +------------------------------------ + +Usare VLA sullo stack produce codice molto peggiore rispetto a quando si usano +vettori a dimensione fissa. Questi `problemi di prestazioni `_, +tutt'altro che banali, sono già un motivo valido per eliminare i VLA; in +aggiunta sono anche un problema per la sicurezza. La crescita dinamica di un +vettore nello stack potrebbe eccedere la memoria rimanente in tale segmento. +Questo può portare a dei malfunzionamenti, potrebbe sovrascrivere +dati importanti alla fine dello stack (quando il kernel è compilato senza +`CONFIG_THREAD_INFO_IN_TASK=y`), o sovrascrivere un pezzo di memoria adiacente +allo stack (quando il kernel è compilato senza `CONFIG_VMAP_STACK=y`). + +Salto implicito nell'istruzione switch-case +------------------------------------------- + +Il linguaggio C permette ai casi di un'istruzione `switch` di saltare al +prossimo caso quando l'istruzione "break" viene omessa alla fine del caso +corrente. Tuttavia questo rende il codice ambiguo perché non è sempre ovvio se +l'istruzione "break" viene omessa intenzionalmente o è un baco. Per esempio, +osservando il seguente pezzo di codice non è chiaro se lo stato +`STATE_ONE` è stato progettato apposta per eseguire anche `STATE_TWO`:: + + switch (value) { + case STATE_ONE: + do_something(); + case STATE_TWO: + do_other(); + break; + default: + WARN("unknown state"); + } + +Dato che c'è stata una lunga lista di problemi `dovuti alla mancanza dell'istruzione +"break" `_, oggigiorno non +permettiamo più che vi sia un "salto implicito" (*fall-through*). Per +identificare un salto implicito intenzionale abbiamo adottato la pseudo +parola chiave 'fallthrough' che viene espansa nell'estensione di gcc +`__attribute__((fallthrough))` `Statement Attributes +`_. +(Quando la sintassi C17/C18 `[[fallthrough]]` sarà più comunemente +supportata dai compilatori C, analizzatori statici, e dagli IDE, +allora potremo usare quella sintassi per la pseudo parola chiave) + +Quando la sintassi [[fallthrough]] sarà più comunemente supportata dai +compilatori, analizzatori statici, e ambienti di sviluppo IDE, +allora potremo usarla anche noi. + +Ne consegue che tutti i blocchi switch/case devono finire in uno dei seguenti +modi: + +* ``break;`` +* `fallthrough;`` +* ``continue;`` +* ``goto